Hygge Aero Carbon Frame

[Rallyfocus]

I'm planning to purchase my first direct from China frame to build up over the winter as a race bike. I'm leaning towards a Model S with EPS molding. I'm just a little unclear on the sizing an geometry of this frame. Some measurements look like they are taken from different points than Trek uses.

Is anyone able to comment on what size would be the closest to a Size 56 2023 Emonda SLR? I appreciate the help and info available on this site.

It looks like the Size 52M is 1.5mm shorter in reach and 7mm higher in stack. I'm currently riding with 10mm of spacers on my Emonda, it seems like this size would work well with less spacers. I'm 183cm tall with an inseam of about 31.

Anyone else roughly my size care to share what size Model S they are riding and what the fit is like?

[TidyDinosaur]

I'm planning to purchase my first direct from China frame to build up over the winter as a race bike. I'm leaning towards a Model S with EPS molding. I'm just a little unclear on the sizing an geometry of this frame. Some measurements look like they are taken from different points than Trek uses.

Is anyone able to comment on what size would be the closest to a Size 56 2023 Emonda SLR? I appreciate the help and info available on this site.

It looks like the Size 52M is 1.5mm shorter in reach and 7mm higher in stack. I'm currently riding with 10mm of spacers on my Emonda, it seems like this size would work well with less spacers. I'm 183cm tall with an inseam of about 31.

Anyone else roughly my size care to share what size Model S they are riding and what the fit is like?

You can use several websites to compare geometry. Like these:
https://geometrygeeks.bike/
https://bike-stats.de

[Lotnik]

I'm planning to purchase my first direct from China frame to build up over the winter as a race bike. I'm leaning towards a Model S with EPS molding. I'm just a little unclear on the sizing an geometry of this frame. Some measurements look like they are taken from different points than Trek uses.

Is anyone able to comment on what size would be the closest to a Size 56 2023 Emonda SLR? I appreciate the help and info available on this site.

It looks like the Size 52M is 1.5mm shorter in reach and 7mm higher in stack. I'm currently riding with 10mm of spacers on my Emonda, it seems like this size would work well with less spacers. I'm 183cm tall with an inseam of about 31.

Anyone else roughly my size care to share what size Model S they are riding and what the fit is like?

I'm 183 cm too and I bought size L. Yesterday I was doing fitting to cut the steerer tube  and it fits me good.

[Rallyfocus]

Thanks for the info folks! It looks like I'll be going for a large.

[fulcom]

Hi guys, I'm new here but I've read the full 35 pages so I feel like I know a bunch of you already 

I have a question for you aficionados: I'm 170cm but with a 75cm inseam (short legs basically). Although I fall right into the S frame size bucket (166-174cm), I'm concerned that it might still be too big. Any experience to share with Hygge specifically regarding sizing? I'm familiar with the famous "in case of doubt, size down" but if I do it I want it to be for the right reasons.

Thanks for your help!

[TidyDinosaur]

Hi guys, I'm new here but I've read the full 35 pages so I feel like I know a bunch of you already 

I have a question for you aficionados: I'm 170cm but with a 75cm inseam (short legs basically). Although I fall right into the S frame size bucket (166-174cm), I'm concerned that it might still be too big. Any experience to share with Hygge specifically regarding sizing? I'm familiar with the famous "in case of doubt, size down" but if I do it I want it to be for the right reasons.

Thanks for your help!

I am 172 with 82 inseam and I have the small. So you might want to size down...

This is my setup:

[fulcom]

I am 172 with 82 inseam and I have the small. So you might want to size down...

This is my setup:

What a beauty @TidyDinausor! 
Thanks, I was thinking that you would probably be the best suited to answer that question (given your weight I assumed that we might be in the same ballpark).
Out of curiosity what handlebar size did you go for? I wouldn't really know what stem length to go for with one size down

[TidyDinosaur]

What a beauty @TidyDinausor! 
Thanks, I was thinking that you would probably be the best suited to answer that question (given your weight I assumed that we might be in the same ballpark).
Out of curiosity what handlebar size did you go for? I wouldn't really know what stem length to go for with one size down

I have the 80/380 handlebar and wish I could go shorter... I find most of the frames have a reach that is too long for me. But that does correspondent to my proportions. Slightly longer legs, so slightly shorter torso...
You can compared the frame sizes on one of those geometry sites and adjust stem size there

[fulcom]

I have the 80/380 handlebar and wish I could go shorter... I find most of the frames have a reach that is too long for me. But that does correspondent to my proportions. Slightly longer legs, so slightly shorter torso...
You can compared the frame sizes on one of those geometry sites and adjust stem size there

Going with the XS but now I'm trying to find the right stem length (and as it's my first real road bike - I have a gravel one - I have nothing to compare it to so I can't use the likes of geometry geeks). I sent Hygge a message and they suggested 110 but I think I will go for the 100mm one

[laktattausch]

Is it worth to sell my "old" Frame (3000 kilometers) and buy a new one with EPS Mould Technology? 

[TidyDinosaur]

Is it worth to sell my "old" Frame (3000 kilometers) and buy a new one with EPS Mould Technology? 

I would guess not

[ByAliTR]

Is it worth to sell my "old" Frame (3000 kilometers) and buy a new one with EPS Mould Technology? 

model s old frame,

it is already a very hard, rigid frame. there is absolutely no need to order the same model again for eps moulding.

[jonathanf2]

Maybe if they added new features like wider tire sizes and possible perks such as UDH or a threaded T47 BB, even then it's not really a necessity unless something is holding you back from your current frame. Better off investing that money in either wheels or components that will help your performance.

[BAR]

My new Eps hygge carbon laser L size, ultegra di2, elitewheels ent 2.0

[Lotnik]

So I finally managed to put together my bike based on the Hyyge frame. It looks and rides very good. My setup is Elite wheels ENT2.0, tubeless with S-works tyres, mechanical 105. Ale together went 8.1 kg in size large.
I went 100 km in one shotn lastly. But there is one issue I have so far. Noises form the seatpost and I don't know how to deal with it? Put  more or less torque on the seat clamp?