Lightcarbon: New LCR017-D (or Yishun R1058-D)

[Stoemper]

Email lite carbon directly and ask them for additional spacers .The rubber parts are for the battery on the di2 system that fits in the seat post

Thanks makes, sense first time setting up di2. Seems of the two only the triangular part fits is that normal?

[Ar26]

Thanks makes, sense first time setting up di2. Seems of the two only the triangular part fits is that normal?

With a colson on battery , it's more practical

[dinorello]

Thanks makes, sense first time setting up di2. Seems of the two only the triangular part fits is that normal?

Yeah I didn't wind up using it because it didn't fit.. seems odd that they would include it when it wasn't really designed for that particular seat post on the lc17

[dinorello]

With a colson on battery , it's more practical

Would a colson battery be a few AA batteries in a case like the Chinese group sets have?

[Stoemper]

Crap I was going along building up the bike bit by bit. Routed all the cables and then wanted to mount the bottom bracket… and the drive side is not good, the bottom bracket simply doesn’t catch the thread and go in. I emailed Wendy for a solution but I fear it needs to be replaced or atleast rethreaded

[TidyDinosaur]

Crap I was going along building up the bike bit by bit. Routed all the cables and then wanted to mount the bottom bracket… and the drive side is not good, the bottom bracket simply doesn’t catch the thread and go in. I emailed Wendy for a solution but I fear it needs to be replaced or atleast rethreaded

Could it be put in backwards? Have you tried turning it the other way?

[Ar26]

For my part, I installed a Kactus bottom bracket. The letter R was on the left and L on the right (LOL). Obviously, I knew how to correct it. I sent an email to Kactus to report the problem and they admitted that there was a printing problem on certain batches

[Stoemper]

Just dropped it off at the bicycle shop, they also couldn’t make it fit and the thread seems to be the problem. I get a final answer on tuesdsy if they can fix it. 

[dinorello]

Could it be put in backwards? Have you tried turning it the other way?

The drive side bottom bracket on most bikes uses a left-hand thread, which means it tightens counterclockwise and loosens clockwise. This is called "English" threading, which is the common standard for bottom bracket shells. The non-drive side (left side) of the bottom bracket uses a right-hand thread, which tightens clockwise and removes counterclockwise.

[Stoemper]

The drive side bottom bracket on most bikes uses a left-hand thread, which means it tightens counterclockwise and loosens clockwise. This is called "English" threading, which is the common standard for bottom bracket shells. The non-drive side (left side) of the bottom bracket uses a right-hand thread, which tightens clockwise and removes counterclockwise.

I know and this is clearly marked on the bottom bracket I got. It doesn’t even go in a bit it doesn’t grip the thread it’s as if it’s the wrong size. The non drive side goes in smoothly btw. Haven’t heard back from Wendy (about this and some paint issues I discovered while working with the bike) normally she was very quick with her response let’s hope that’s not a bad omen.

[dinorello]

That sucks... you'd hope they'd at least check the bottom bracket threads prior to shipping out the frame.   

I understand now why most Western brands who manufacturer in China paint their frames in house ..

[Serge_K]

I know and this is clearly marked on the bottom bracket I got. It doesn’t even go in a bit it doesn’t grip the thread it’s as if it’s the wrong size. The non drive side goes in smoothly btw. Haven’t heard back from Wendy (about this and some paint issues I discovered while working with the bike) normally she was very quick with her response let’s hope that’s not a bad omen.

Please post pictures. i want to believe it's user error, because otherwise it's the worst QC control in recent history, and Lightcarbon is very well regarded. And they know we discuss their stuff on here.
you may want to message madpec on YT, as he's a bit of a guru at facing & machining bottom brackets, especially T47 now that he has the (insanely expensive) tool.

[Stoemper]

I dropped it off at the bicycle shop yesterday. The head mechanic was off and they open on again on Tuesday so I left it there. I’ll get back when I get their assessment.

[dinorello]

You mean how he faced the SL8 and voided the warranty of the frame? I trust that idiot as far as I can throw him.

Seems like you're going a bit too hard on mapdec when all he's doing is cleaning the excess paint off the BB shell.   Yes he does get a bit granular on shit sometimes but he's not an idiot and his channel offers good content overall

[dinorello]

Do you have a link to the YT video you're referencing?