SP-Cycle M06 build thread

[apctjb]

How does cable routing work if I use a standard stem and handle bar rather than a single piece handlebar/stem combination? Are there other openings in the frame for the cables or only through an integrated bar/stem headset?

[Ludo]

No opening but the frame come with headset cover meant to be used with regular stem, the cover has 3 holes in it to run you cabling through it

[apctjb]

No opening but the frame come with headset cover meant to be used with regular stem, the cover has 3 holes in it to run you cabling through it

Thank you

[apctjb]

Ludo; Do you have a contact (email) of someone at Yuan An wheels? I have sent them inquiries via their website but getting no replies.  Are you still happy with the wheels you got from them. Thanks

[Ludo]

It has been posted by a couple of guys these last few days that they don't do direct to customer anymore. Get from elite wheels or covet (their new brand apparently) on AliExpress. Some good coupons right now.

[apctjb]

t has been posted by a couple of guys these last few days that they don't do direct to customer anymore. Get from elite wheels or covet (their new brand apparently) on AliExpress.

Thanks, I reached out to Elite Wheels. Could not find 33mm wide 29er wheels at <1300g online (1500g was the lightest) but hoping can find some 1280g wheels like you did.

[Matter]

Thanks, I reached out to Elite Wheels. Could not find 33mm wide 29er wheels at <1300g online (1500g was the lightest) but hoping can find some 1280g wheels like you did.

https://www.aliexpress.com/item/1005008570250403.html
The mountain wave wheel set 29er32mm inner width weighs about 1300g. You can also replace the regular rims. AliExpress will start the anniversary promotion today, and the price will be discounted

[apctjb]

Took advantage of the Ali express sales and grabbed some Airwolf 35mm x 20m DT240 Xray spokes 1200g wheels. So the build weight on paper is looking ~ 8.8kg. Thanks for all the suggestions.


Frame   SPCycle SP-M06   1050
Wheels   Airwolf 35mm x 20m DT240 Xray spokes   1200
RockShox Sid Ultimate - 29" x 120mm      1500
Crankset: Shimano XT M8100 -  30T / 170mm      2600
Bottom Bracket: Shimano MT800 Press-fit      -
Cassette: Shimano XT M8100 10/51T - 12 speed      -
Chain: Shimano XT M8100 - 12 Speed - 114 Links      -
Rear Derailleur: Shimano XT M8100 - 12 Speed      -
Gear Lever: Shimano XT M8100 I-Spec EV mount      -
Disc Brakes: Shimano XT M8100 centrelock front (80mm) & rear (600mm)      -
MT800 Rotors  180mm Front - 160mm Rear      -
Toseek 740mm carbon handlebar      180
Stem      100
Handlebar grips      100
Dropper post 130mm, 400mm      500
Titanium pedals      238
Specialized S-Works Fast Trak T5/T7 (29" x 2.35")      1200
Saddle      150
Waterbottle cage      16

[bordev]

I ordered this frame and was wondering what is the best choice for a Shimano crankset working together with a 12sp XT cassette. Is it the fc-m8100 or the fc-m8120?  The latter seems to be more suitable for a wider Q factor but it's my first build so not sure.

[apctjb]

Build complete. No problems, everything went together well.  Have only done a couple of short test rides but loving this frame so far. Light, responsive, climbs well. Building a second one now for my wife. Total weight ~ 20lbs/9.1 kg.

lbs   20.2       grams   9197    $2,297.00       Weight    Price Frame   SPCycle SP-M06   1050    $435.00 Wheels   Airwolf 35mm x 20m DT240 Xray spokes   1200    $600.00 RockShox Sid Ultimate - 29" x 120mm & bearings      1571    $479.00 Crankset: Shimano XT M8100 -  30T / 170mm      2600    $471.00 Bottom Bracket: Shimano MT800 Press-fit      -    Cassette: Shimano XT M8100 10/51T - 12 speed      -    Chain: Shimano XT M8100 - 12 Speed - 114 Links      -    Rear Derailleur: Shimano XT M8100 - 12 Speed      -    Gear Lever: Shimano XT M8100 I-Spec EV mount      -    Disc Brakes: Shimano XT M8100 centrelock front (80mm) & rear (600mm)      -    MT800 Rotors  180mm Front - 160mm Rear      -    Toseek 740mm carbon handlebar      185    $23.00 Stem      100    $20.00 Handlebar grips      102    $10.00 Specialized Dropper post 130mm, 400mm      535    $80.00 Titanium pedals      238    $39.00 Fast Trak Flex Lite T5/T7 TLR XC 29in Tires      1450    $100.00 Saddle      150    $32.00 Waterbottle cage      16    $8.00

[adri96]

My spcycle has now 3000km without any isues, a very good frame. My build is a size L frame with x0 t type, full carbon, 1300 carbon wheels, xcadey power meter, fox 32, shimano pd m540 and it weights 9,1kg

[spcycle]

size XL is now available.

[Ludo]

I did my first Xterra triathlon event in Austin a couple of weeks ago, bike performed flawlessly outside of an issue with the saddle rotating up. I got a few question on the frame and compliment on the paint. I don't think it was the right back for the terrain as there were a lot of of rock beds/climbs but still manage a time close in the good pack (12th out of 70ish runner I think) on the bike leg and I now regret not having ordered the M868 frame before the tariff kicked in...

[niklass]

Anyone knows what type of headset I need to buy to make it work with this frame and a "Syncros" handlebar/stem combo from Ali?

I have ordered a frame with the same headset typ but without the actual headset And I have ordered the handlebar/stem combo already. But now i am pretty lost in whats needed headsetwise to make this work. Any ideas are more than welcome!

I have found this one: https://r2-bike.com/SYNCROS-Headset-tapered-integrated-Drop-In-SHIS-IS52-318-IS52-40

Or is it this one: https://www.ebay.co.uk/itm/133895760078?chn=ps&_ul=GB&norover=1&mkevt=1&mkrid=710-169684-019962-0&mkcid=2&itemid=133895760078&targetid=325425753764&device=c&mktype=pla&googleloc=9062465&poi=&campaignid=20637590555&mkgroupid=156071835804&rlsatarget=pla-325425753764&abcId=&merchantid=115090110&gad_source=1&gad_campaignid=20637590555&gbraid=0AAAAAD_QDh-y34s6EVKsC53aiJaglzusr&gclid=CjwKCAjwvO7CBhAqEiwA9q2YJXF-MVrrEpV38B7ZhcC4iVNQGCTs-ndHZz7bH7dg60o2aseYtSOWHhoCp5gQAvD_BwE

And no extra dustcover top?

So many questions now

[Ludo]

The syncros spacers guide the hoses on the side rather than middle IIRC, so the C ring need to have a large cut out. I will look in my build pictures if I can see what I mounted