VeloBuild VB-R-268 frame

[volan]

I ordered on 27.10. Yesterday Chris sent me a picture when I asked. Said it will be shipped tomorrow or saturday. Could've been a bit sooner (he said it would), but it's ok I guess. When I ordered from Carbonda my xc frame, they shipped it really fast (but it was without painting).

Wheels should be shipped today, Peter said. Got a picture. They sit at 1420grams (D50CU-33 T800, cx-ray, inhouse hubs, brass nipples). Would've been under 1400 if I went alu nipples, but I detest them.

Everything else arrived. I went with 105di2, but ordered lighter rotors, riro carbon cranks and ztto 32t cassette (around 230g). So i hope build would land below 8kgs. Will go with xtr pedals atm. And another thing, Chris appologized for delays and sent me par of bottle cages and spare rd hanger. I was just about to buy the cages on ali, good thing I didn't

[Miodu]

Hygge model S or vb 268. Which one of these frames have better quality? Im planning to use r7020 groupset (mech/hyd).

[Cnasta]

I ordered on 27.10. Yesterday Chris sent me a picture when I asked. Said it will be shipped tomorrow or saturday. Could've been a bit sooner (he said it would), but it's ok I guess. When I ordered from Carbonda my xc frame, they shipped it really fast (but it was without painting).

Wheels should be shipped today, Peter said. Got a picture. They sit at 1420grams (D50CU-33 T800, cx-ray, inhouse hubs, brass nipples). Would've been under 1400 if I went alu nipples, but I detest them.

Everything else arrived. I went with 105di2, but ordered lighter rotors, riro carbon cranks and ztto 32t cassette (around 230g). So i hope build would land below 8kgs. Will go with xtr pedals atm. And another thing, Chris appologized for delays and sent me par of bottle cages and spare rd hanger. I was just about to buy the cages on ali, good thing I didn't

Considering the weight of the frame (950 size M) and your quite lightweight wheels, woulnd't sub 7,5kgs be likely? Or is the 105 that much heavier than Ultegra. With your rotors and cassette I can't imagine it making much difference?

[AndyCreese85]

I ordered on 27.10. Yesterday Chris sent me a picture when I asked. Said it will be shipped tomorrow or saturday. Could've been a bit sooner (he said it would), but it's ok I guess. When I ordered from Carbonda my xc frame, they shipped it really fast (but it was without painting).

Wheels should be shipped today, Peter said. Got a picture. They sit at 1420grams (D50CU-33 T800, cx-ray, inhouse hubs, brass nipples). Would've been under 1400 if I went alu nipples, but I detest them.

How much did you pay for your wheels, if you don't mind me asking?

[volan]

Considering the weight of the frame (950 size M) and your quite lightweight wheels, woulnd't sub 7,5kgs be likely? Or is the 105 that much heavier than Ultegra. With your rotors and cassette I can't imagine it making much difference?

Well yes, I hope it will land around 7.6-7.8 with pedals. I will for now use MTB xtr ones that are around 80g heavier than SPD SL counterpart. With my lighter rotors and cassette, and cranks (580g) group set will be lighter than stock Ultegra. But now I just want to build it, and waiting is one thing I hate really bad. And alloy nipples

[volan]

Guys, can I change the integrated handlebars to some other brand if I find VB's not good fit? Can I buy whatever brand from aliex, or do I need to match the spacers beneath stem... I'm not kinda getting this.

[Macedingle]

Well yes, I hope it will land around 7.6-7.8 with pedals. I will for now use MTB xtr ones that are around 80g heavier than SPD SL counterpart. With my lighter rotors and cassette, and cranks (580g) group set will be lighter than stock Ultegra. But now I just want to build it, and waiting is one thing I hate really bad. And alloy nipples

Why the hate of aluminum nips?

[volan]

Why the hate of aluminum nips?

Well, they're brittle, snapped on me couple of times... and don't really need any more reasons. So 20grams of nipples in exchange for a much more reliable future service of the wheel is a no brainer imo.

But I would again ask the question in a post above: Can I put these handlebars on VB268 without any problems?

https://www.aliexpress.com/item/1005007905792275.html?spm=a2g0o.cart.0.0.beab38daJ8Vjfx&mp=1

[Tilmanstoa5ty]

I'm wondering the same. Would be really cool if somebody could share their experience with mounting another handlebar on the frame

[hazzer19]

I'm wondering the same. Would be really cool if somebody could share their experience with mounting another handlebar on the frame

It's possible to use other bars with most of VB's frames either integrated or separate bar/stem combos with either hidden or exposed cables. In the case of the 268 I think you just loose out on the top tube cover which is shaped to match the frame and would just need to find something appropriate that can fit. Seems like theres lots of headset covers/spacers available on aliX that would do the job.

[volan]

It's possible to use other bars with most of VB's frames either integrated or separate bar/stem combos with either hidden or exposed cables. In the case of the 268 I think you just loose out on the top tube cover which is shaped to match the frame and would just need to find something appropriate that can fit. Seems like theres lots of headset covers/spacers available on aliX that would do the job.

Thanks for answering. However, I wonder why do I need to loose the VBs cover and spacers, is the shape of the handlebar stem the reason? Would it be possible to just swap the bars?

[Miodu]

Does anybody know the frame height on rear caliper mount? Need to order shimano bolt C.

[hazzer19]

Thanks for answering. However, I wonder why do I need to loose the VBs cover and spacers, is the shape of the handlebar stem the reason? Would it be possible to just swap the bars?

Yah I think it's because the VB spacers/cover are meant to match the shape of the bars. There is a chance you may be able to make it work by filling away the pins in the spacers that are meant to line up with the small holes in the bars but not sure if the spacers would then stay in place with the stem/bars after.

[hazzer19]

Does anybody know the frame height on rear caliper mount? Need to order shimano bolt C.

Just meassuredmine at ~3cm

[Miodu]

Just meassuredmine at ~3cm

Thanks, so need to buy 43mm bolt