Author Topic: VeloBuild VB-R-268 frame  (Read 90015 times)

SillyMochi

Re: VeloBuild VB-R-268 frame
« Reply #510 on: November 06, 2024, 05:50:49 AM »
Mine took about 2 weeks before being shipped. Wasn't too concerned as my paint job was a bit more complex and needed several layers/drying in between. I did get pictures before it was shipped. I did ask for them beforehand though, so not sure if they send those unsolicited to everyone.
Slow on the climb. And everywhere else.

volan

Re: VeloBuild VB-R-268 frame
« Reply #511 on: November 06, 2024, 07:53:50 AM »
Thanks! Chris just replied they'll finish paint job this week. Now waiting game. Imma go out on my Carbonda MTB till then :)

Tilmanstoa5ty

Re: VeloBuild VB-R-268 frame
« Reply #512 on: November 06, 2024, 08:11:22 AM »
I asked Chris if they can send me pictures after the paint is done and he confirmed me that they will do it

volan

Re: VeloBuild VB-R-268 frame
« Reply #513 on: November 06, 2024, 04:45:36 PM »
This will be my first road bike build. Im pretty excited I admit. Yet I was avid mtb-only guy... Life is so ironic. Anyways, all parts are ordered, and none yet arrived :P

Will be going 105 di2 with Riro aliex carbon cranks
Peter's wheels 50mm deep and those wide ones, 26-33
contis gp5k tubeless 28-30

Was wondering on SPD-sl pedals. Probaly gonna go with shimano 7 or 8k series. Since I have really good experience with shimano mtb spd's. They spin and survived, really really hard time on my rocky trails.

zett

Re: VeloBuild VB-R-268 frame
« Reply #514 on: November 07, 2024, 03:46:53 AM »
Few questions about the frameset, still deciding what frameset to go for in my build. I skipped through the whole thread, but obviously didn't read all and every post, so bear with me if this was discussed already.

Do we have any geometry info on the integrated handlebar that VB provides? CAD drawing or something? Ideally I want a compact bar with just a bit of flare, i.e. drops maybe 2 cm wider than hoods.

My understanding is that the geometry isn't as aggressive (only 536 mm stack in size 54) as it seems, as there is a special mandatory spacer that is around 15 mm in height that comes on top of the frame stack. Is that correct? OTOH, on some photos it still did look super aggressive, but maybe that was due to individual sizing decisions. I'm 176 cm and I need around 73 cm saddle height and considered size 54 so far. Goal is 8-9 cm saddle to bar drop.

Is there any verdict on saddles with 7x9 rails? Supposedly there were issues with the clamps, and VeloBuild knew about it. Have they fixed it?

What kinds of accessories do you typically want in addition to what VB ships? From what I've read it should be 1. grommets for cables, 2. Di2 battery holder and 3. maybe a better expander plug.

Edit: another thing... how stiff are the integrated bars? I think I read they are quite wiggly. Is that (still) true?
« Last Edit: November 07, 2024, 03:52:56 AM by zett »

volan

Re: VeloBuild VB-R-268 frame
« Reply #515 on: November 07, 2024, 06:40:28 AM »
Few questions about the frameset, still deciding what frameset to go for in my build. I skipped through the whole thread, but obviously didn't read all and every post, so bear with me if this was discussed already.

Do we have any geometry info on the integrated handlebar that VB provides? CAD drawing or something? Ideally I want a compact bar with just a bit of flare, i.e. drops maybe 2 cm wider than hoods.

My understanding is that the geometry isn't as aggressive (only 536 mm stack in size 54) as it seems, as there is a special mandatory spacer that is around 15 mm in height that comes on top of the frame stack. Is that correct? OTOH, on some photos it still did look super aggressive, but maybe that was due to individual sizing decisions. I'm 176 cm and I need around 73 cm saddle height and considered size 54 so far. Goal is 8-9 cm saddle to bar drop.

Is there any verdict on saddles with 7x9 rails? Supposedly there were issues with the clamps, and VeloBuild knew about it. Have they fixed it?

What kinds of accessories do you typically want in addition to what VB ships? From what I've read it should be 1. grommets for cables, 2. Di2 battery holder and 3. maybe a better expander plug.

Edit: another thing... how stiff are the integrated bars? I think I read they are quite wiggly. Is that (still) true?

Bar geometry is here: https://www.velobuild.com/products/carbon-fiber-road-bike-integrated-handlebar-with-spacers-for-hidden-cables-routing
Seems there's just a tad bit of flare.
I bought additional seatpost (30$ or smtng); you just pay for the seatpost that's listed on their site, and tell Chris you want the seatpost for VB268 as a reserve. - if you want one, ofc.
I also bought another set of spacers (buy headset from their site and again, tell Chris that's for spacers). And there's a link for a seatpost di2 battery holder, on Ali for 20 some $.

And since you kinda helped me realise that 15mm spacer that's painted with the frame should also count as a stack height... I could go without another set of spacers I thought I could use. But, why did they list stack without the spacer in the first place? Do other brands do the same? Cause I compared geos with other brand bikes and VB seemed a bit too much agressive... Now, if others measure stack WITH that top HT cover, that would make a lot of sense, and would mean I won't need additional spacers under the stem. Happy days.

I took 56 on my 184 height. 42/110 bars, and I really hope I won't need to change the bars/need longer stem.

First shipment for the build just arrived. Some tools, bar tape, BB from ZTTO that threads into itself (hope that would be ok). Di2, frame and wheels yet to come. Im hoping I'll finish the build this month.

SillyMochi

Re: VeloBuild VB-R-268 frame
« Reply #516 on: November 07, 2024, 07:16:08 AM »
Instead of that "expensive" Di2 battery holder, you can just DIY it like I (and a few others did): warp the battery in some bubble foil (the one it comes with will just do fine), tape it down with some electric tape so it becomes a nice "roll", and stuff it in the seatpost. Holds perfectly for me. No rattling, no slipping, no extra costs  ;D
Slow on the climb. And everywhere else.

zett

Re: VeloBuild VB-R-268 frame
« Reply #517 on: November 07, 2024, 09:24:07 AM »
I bought additional seatpost (30$ or smtng); you just pay for the seatpost that's listed on their site, and tell Chris you want the seatpost for VB268 as a reserve. - if you want one, ofc.

Stupid question, but why would you need a spare seatpost?

volan

Re: VeloBuild VB-R-268 frame
« Reply #518 on: November 07, 2024, 09:52:13 AM »
It's not stupid question. It's just weird me :P

Couple of pages here before I asked where could I order another seatpost should I needed one (if i somehow brake original one). And basically I can't, since shapes are mostly different for all these aero seatposts. So I ordered 2, from the get go... that's it.

renrew

Re: VeloBuild VB-R-268 frame
« Reply #519 on: November 07, 2024, 12:56:05 PM »
Hello, can someone tell me the dimensions of the steering head bearings?
Thanks



renrew

Re: VeloBuild VB-R-268 frame
« Reply #520 on: November 07, 2024, 12:57:10 PM »
sorry i have Velobuild 168

volan

Re: VeloBuild VB-R-268 frame
« Reply #521 on: November 12, 2024, 07:47:28 AM »
Everything arrived, groupset, tools, bb, Riro carbon crankset... except the frame and wheels. :(

Chris was responsive. Initially told me it'll take 2 weeks for the paint, still not done. Will send pictures 2morrow. As for the wheels, should be shipped by this friday, as Peter said. Hoping I'll get this done by the end of this month.