WheelTop EDS TX Full Wireless Groupset (Chinese SRAM)

[Phaxe]

God I hope that OSPW isn't the only option

The translation I ran on it says "The lower guide wheel adopts a hollow design, which is very technological, giving "empty benefits".

I lol'd.

I do think the groupset looks pretty damn good though!

[toxin]

Yeah empty benefits is right

[sear]

I am hoping for two things from this:
1. The new parts can mix and match with the existing EDS TX
2. The FD is vastly improved

I'm actually super happy with what I have for the most part, but that FD is just awful.

[raisinberry777]

I am hoping for two things from this:
1. The new parts can mix and match with the existing EDS TX
2. The FD is vastly improved

I'm actually super happy with what I have for the most part, but that FD is just awful.

The FD and shifters are the same from the spec sheet in that link.

[Sincman]

I've decided to change wireless shifting systems. I've removed the EDS-TX  derailleurs front and rear from my bike and am selling them in the classified section. If anyone is interested, you can use them for replacement parts, spare batteries or to upgrade another bike by adding an addition set of (Br)shifters from WheelTop, link to parts in the listing. You would still spend less than what the system is currently selling for.

[estingo]

Does anyone know, which type of needles and olive the EDS TX uses? Their website says that these parts are proprietary, but on video, they look very similar to sram or magura.
Or if they are really incompatible with already existed models, where can I get a spare? A quick search on aliexpress showed nothing.

As I tried to install the brake hoses that came with the Wheeltop package, I noticed they were not of great quality. I've bought now Magura brake hoses, they were a better quality when I installed them. I've posted that in this thread: https://chinertown.com/index.php/topic,4449.45.html
Long story short, I tried to find the correct oil pin and olive to use for the EDS TX because I didn't want to wait until it arrived from AliExpress and buy it here locally, I asked Wheeltop over Instagram, and their service desk from the website. The answer from Wheeltop was: "Regarding the type of hose, needle and olive, we recommend you to purchase the bh59 type." But the olive that I have doesn't look like a bh59 at all but more the shape of the Sram. When watching Oz Cycle his video about "setting up Wheeltop EDS gears on your bike" he says time stamp 3:13 if you were using Shimano you need to replace the barb & Olive. So in the end I bought from the Aliexpress seller a set of oil pins and olives including those standard brake hoses. The seller also said: "I also think that the quality of the hose is relatively ordinary. You can buy a better quality one locally"

So all in all, I still don't know which type fit's as I don't think it's the bh59, but if someone wants to try go ahead I didn't dare to try it.

[rockerplates.de]

Hi we are a wheeltop retailer in canada. Im sure my business partner can answer this question if no one else chimes in.

paul@ciclowerks.com
[/quote

Hi Paul,

we contacted wheeltop for distributing in Europe...after asking for Ce Certs, ANT+, Bluetooth license, battery tests and certs and how they handle to patent infringement of the flatmount brakes: silence....did you get any helpful information]

[estingo]

Wanted to highlight this, as i dont think it is widely known that the quality of the hydraulic hose matters. I didn't realize it was a thing until 1 week ago myself.
On this forum, there's a lot of discussion around mechanical disc brakes and the fact you NEED to use Jagwire KEB-SL kevlar hoses to maximize braking performance. Honestly, you're shooting yourself in the foot if you dont use that (may be irrelevant if you're very light, obviously, but i'm not)

Same story, I wasn't aware myself until I pulled them out and received the Magura ones, what a night and day difference. I might have shot myself in the leg, we will see, I'm not the lightest either sitting around 85kg. For checking a replacement, I considered the standard Shimano and Sram, I also checked the Jagwire but found a few reviews that people didn't like, so in the end I went for a Kevlar version of Magura. I wanted Kevlar to be a replacement because it's obviously better than the "normal" Aliexpress ones and I thought Magura isn't too bad either.

Anyway I didn't drove a single km or mile yet because I'm still waiting for my wheels. will report how it feels though, later on. Thanks for the awareness of Brake hoses and your experience as well.

[Linsook]

Interesting comments on hydraulic hoses.  I'm on the stock ones and they feel great and are working fine.  I'm about 100kg.

When I do major maintenance I will look into replacing the hoses but I am skeptical of any gains. 

[Sebastian]

Back in my motorcycle days I remember that steel braided brake lines for the brakes were all the rage among racers as it was supposed to improve the braking point. Dunno exactly if those are standard for cars. But IMO I've used stock Shimano ones, Magura ones and now on a recent build I used whatever LTWOO sends along with their stuff. I can't tell any difference and TBH I don't think on bike brakes there's enough oil pressure involved so that it really makes a difference, at least not as much of a difference as on a dual front brake with 4pistons per caliper and 300mm rotors on a superbike that goes 300kph. But with that being said, r2-bike.com in Germany sells exactly those "steel flex" hydraulic brake lines if you feel curious. They're almost 100EUR per 2.6 metres of brake line. I think I'll pass.

[kanuto]

Anyone tried the eds gx?

[Bluehills5]

Wheeltop aquires Spanish brand Rotor.

https://bikebiz.com/chinese-oem-wheeltop-acquires-majority-stake-in-rotor/

[FredericksSirvelo]

Goofed a bit. I overtorqued the rear derailleur and stripped the m5 part of the bolt. I'm going to use an extraction kit to remove the bolt, but what do I do from there? As in what replacement bolt should I order? or how do I fix this lol. Thank you in advance!

[Tijoe]

Goofed a bit. I overtorqued the rear derailleur and stripped the m5 part of the bolt. I'm going to use an extraction kit to remove the bolt, but what do I do from there? As in what replacement bolt should I order? or how do I fix this lol. Thank you in advance!

When you find out, let us all know.  One of mine is almost completely stripped out and I could use a replacement.

[FredericksSirvelo]

Will do! I ordered a generic bolt, we’ll see if it’s long enough. I also emailed Wheeltop so update when they respond.