Tideace NEW Gravel Frame: GR201

[Uberflo]

Yes, same here. Cannot recommend the bars.

[SillyMochi]

What's the name of the bars coming from tideace? Are they the same that tantan sells or a different style?

[SEDK]

Hmm headset keeps some play with the tideace bar. Also want a longer stem so I can solve both problems.

Lexon is on the shortlist, really good price and loads of sizes. Does anyone have pictures of this 1mm gap at the headtube? Any negatives on lexon bars?

Picture of the gap with Lexon bars:

[Uberflo]

I have a Bigrock Skyline Handlebar on order. It will arrive Mid April. I can post photos then.

[Rolandos]

I'm 170 with 79 inseam and same saddle height. Went for 49 and have a 100 mm bar. I run the only 2 spacer that are required to run the bar (15mm).

Are those also lexon bars?

The tideace bars also seems kinda weird, I have 100mm length. The total length from front to back is like 14cm. My blackinc bars are 110mm length and measure total 17.7cm. Can anyone measure the lexon bars front to back of the stem for me? Ill just get one of those

[Rapac]

No it's the original Tantan HB047 bars that are sold with the frame. Only lenght that was available in 360mm width when I ordered it was 100mm. I asked them to tell me when 110 and 120 would be available. Last month it was, and I ordered 120 for my road bike. The updated the bars to 1 1/8 inch (was 1 1/4 with a sleeve before for 1 1/8). Much better !

[Uberflo]

Here are quick and dirty shots with thunder burrs on XMC 36-28 wheels:

https://imgur.com/a/S1VibDL

Tyre clearance is about 3-4 mm on non drive and 2-3 mm on drive side.

[SillyMochi]

Are you comfortable riding this? Looks like you are cutting it very close?

[Uberflo]

There is 3M foil on both chainstays and I do not ride in wet/muddy conditions.

[Uberflo]

Thunder Burts are on 53 mm on these rims. That's in my opinion the absolute maximum on this frame.

[SillyMochi]

Oh okay, that explains it then. What's the inner width of your rims?

[Uberflo]

28 mm ID, 36 mm OD

[SillyMochi]

XMC 36-28 wheels

Now I understand what you meant with that. I first thought it's 36mm deep am size 28 as in wheel diameter 
Also XMC was a bit misleading as DT Swiss offers wheels with that name as well 

[Inhaler]

Thunder Burts are on 53 mm on these rims. That's in my opinion the absolute maximum on this frame.

Is there space for a grx di2 front derailleur with the thunder burt in the rear? I think it needs ~40mm of clearance from the front of the derailleur to tire. Would you mind taking a measurement from the mounting point to the tire for me? Thanks.

[Uberflo]

I will measure it for you but I don't think it will fit.