Tideace NEW Gravel Frame: GR201

[Uberflo]

Do you use the FSA crown race? Or does have the rudy an integrated crown race?

[MrMojo93]

Do you use the FSA crown race? Or does have the rudy an integrated crown race?

I used the FSA one.

[MongooseMan]

Frame finally arrived this afternoon, evening of building commenced.
Ironically, ran into a roadblock with the only non-Chinese component on the bike, my sram brakes off my old bike. Just couldn’t get the stealthamajig to work, no matter what I tried.
Eventually admitted defeat, moved on and add the rest, will take it into the shop tomorrow for brake fixing.

Current build:
- lexon gravel bars (38-90)
- Boland gravel suspension fork (I plan on swapping between this and the stock fork)
- Roval c38 wheels off my old bike
- sram Axs (rival/gx) Groupset
- SIGEYI Axs power meter with a (surprising) 48T chainring with no clearance issues
- (after brakes are sorted) Vittoria mezcal 2.1 tyres (mainly coz I can’t get thunder burts anywhere)

[Uberflo]

I used the FSA one.

You could try a 52x40x7 bearing with 45/45 degree and another crown race

[Uberflo]

Frame finally arrived this afternoon, evening of building commenced.
Ironically, ran into a roadblock with the only non-Chinese component on the bike, my sram brakes off my old bike. Just couldn’t get the stealthamajig to work, no matter what I tried.
Eventually admitted defeat, moved on and add the rest, will take it into the shop tomorrow for brake fixing.

Current build:
- lexon gravel bars (38-90)
- Boland gravel suspension fork (I plan on swapping between this and the stock fork)
- Roval c38 wheels off my old bike
- sram Axs (rival/gx) Groupset
- SIGEYI Axs power meter with a (surprising) 48T chainring with no clearance issues
- (after brakes are sorted) Vittoria mezcal 2.1 tyres (mainly coz I can’t get thunder burts anywhere)

Which issues do you have with the SRAM stealth a majig?

[MongooseMan]

Which issues do you have with the SRAM stealth a majig?

Couldn’t get the valve to release. Turns out I had the olive on backwards, so that’s solved now.
Now I just need to remove the play from the headset, seems I have a similar issue to others here in that regard

[Uberflo]

The Lecon bar comes with two c rings, one plastic one metal. Use the plastic one, metal is regularly trash as is often out of tolerance. Then you should not have any headset play.

[MongooseMan]

The Lecon bar comes with two c rings, one plastic one metal. Use the plastic one, metal is regularly trash as is often out of tolerance. Then you should not have any headset play.

Did exactly that this morning, and seems to work. Thanks!

Just tyres to go now

[MongooseMan]

Mezcals on, and plenty of room (21mm internal rim helps there)


Also chainring clearance with a 48 tooth

[MrMojo93]

You could try a 52x40x7 bearing with 45/45 degree and another crown race

Thanks, that solved it, weird that this FSA bearing is not that standard, I won't change the top one, because for that I would have to reroute the brake hose, but with the bottom one it seems fine.