WheelTop EDS TX Full Wireless Groupset (Chinese SRAM)

[biceryder]

Awesome!  look forward to hearing about this.

[Nomuetze]

I m using magura post mount calipers with magura hose,  on lever side i will use wheeltop olive but not sure about pin, should i use wheeltop one/ that should be inbetween sizes of bh59 and bh90? Or should i go with bh59 despite being slightly thicker.

I have read that magura pin is too ong for shimano levers and damage can happen, can it fit wheeltop levers properly?

From what I see I would not recommend using magura pin on wheeltop levers…as it’s designed around bh59/90 shimano standard … I’d rather use wheeltop insert/pin on the lever side…

[dolph]

I installed the wheeltop eds gex on my steelbike, previously on rival1 11 speed and later 12speed with ratio kit... no luck going to smallest sprocket, with all the tension removed from the H screw and all microadjust to the limit in initial setup it s hesitant to go to smallest sprocket, installed the waser( RD and hanger bolt) that came with it, I found a solution that I don't like... unscrewing the RD bolt from the hanger makes it go further slightly and it works properly.

My cassete is a sunrace 12 speed 11-50 on a hg freehub, is it safe to add more spacers to make it go outwards? it's alreadytight, no loose sprockets, is adding wasers to the RD and hanger interface safe?

I will check if the issue is the specific frame, so i will pop the deraileur on my mtb and road bike and check.

From what I see I would not recommend using magura pin on wheeltop levers…as it’s designed around bh59/90 shimano standard … I’d rather use wheeltop insert/pin on the lever side…

I will install wheeltop everything on the lever side, thanks!

[Icyseanfitz]

Any recommendations for some got gripping pads for eds road groupset?

[Amaretto]

Hi All,

I believe WheelTop will be releasing the new revised EDS TX7800 in due time, this time from the photos it looks like it going to be a complete groupset.

Here are some pictures and info I've gotten from the web.

https://mp.weixin.qq.com/s/Zgoj5uykk_cSwPv3hwqCtw

Any idea when this will be released? 4 months on and still no more news as far as I can see.

[WWcyclist]

Any idea when this will be released? 4 months on and still no more news as far as I can see.

I'll be interested to see if they add an actual stabilizer screw (I think that is what it is called) to the front derauiler when the new group set

[RDY]

Any idea when this will be released? 4 months on and still no more news as far as I can see.

Oh, hell no ... I hope they scrapped that garbage AB style lower jockey wheel.  They'll fail in weeks.

Also surely they'll move to the new caliper design that GeX has?  It's so much better.

[mozart]

i Just install the wheeltop on my road bike and i have vibration from right shifter and i believe from buttons. when i hold it noise stop. if i don't have my fingers on it noise is like old car. is there any solution ;

[biceryder]

Yeah, I discovered this early on with my rim brake WT group.  Basically, if you shine a light inside the paddle, you’ll see that the return spring is pretty weak.  Depending on the road surface mine will rattle or buzz slightly.  If you’re inclined, you could probably find a way to replace it with a stronger spring.

Mine doesn’t bother me enough to do anything about it.

[mozart]

final i open it . ι have alloy lever and the noise suck.
problem is not the spring . noise come from the small button when touch the lever. i use sticker rubber for tube and noise dissapear.
i ll buy fabric tape to cover the inside place of lever

[biceryder]

Awesome!  I’ll take look at mine and see if I have the same problem.

[Icyseanfitz]

Looking to get some nicer brake pads, what am I looking for guys? I ordered some swissstop pads but they where too big