Sorry everyone i totally forgot to update this thread... Better later than never i guess
The bad :
- The RIRO carbon crankset failed after 4 month of use... the metal part that interface with the axle debonded from the right crank.
- I was using a 3d printed saddle from ZTTO that have titanium rails and the rail snapped (i don't have any pic of that tho) after 2 month of use but in this case, i think i was just too heavy for this saddle.
- I broke the lockring of the cassette last year trying to remove it for cleaning... It was actually my fault because i didn't inserted the cassette tool properly
. I was still able to use it for a while but it started to make creaking noise under load so i had to cut it with a grinder.
The upgrages (not in order) :
- 2022 FOX 34 Performance Spep-Cast fork
- Sram X01 AXS derailleur (bought used)
- Heppe quick release thru axle for the fork and frame
- Clone of the Kogel Kolossos oversized derailleur cage installed this week
- PASS QUEST 38T 3mm offset chainring
- Evosid crank (the 5Dev crank clone) but it's temporary, i'm saving for a X01 165mm crank
- ZTTO SLR3 12s cassette
- Elitaone Master Series carbon seatpost
- RYET 3D printed saddle with a carbon base and rails
- Koozer PD50 pedals
- Schwalbe Rick XC 2.25" tires
- Sram HS2 160mm rotors
- KMC X12 Waxed Blacktech chain
- DT Swiss L2 remote lockout lever
All that but still don't have a scale to weight that bike 🤡...
