Other Resources > Maintenance, Mechanics, & Tools

Disconnecting hydraulic hoses

(1/4) > >>

Serge_K:
Hello! Question, given i started using hydraulic brakes only this year.
On 1 bike, i have to invert left and right brakes.
On another, i plan to travel with the bike, so i assume i'll have to disconnect the brake hoses (ltwoo er9)

Question: do you automatically have to use a new barbs & olive every time you disconnect the hose from the shifter? Which presumably also means you have to shorten the hose every time you do that? Or you leave the barb but put a new olive? Or can you re-use the olive?
Also, i dont think i have such spares for ltwoo, what's a good source for these bits?
How do you seal the open end of the hose for travel without it leaking oil everywhere?
Is the barb + olive thing applies on both ends of hoses? I haven't tried to disconnect the hose from the brake calipers.
I do have a bleed kit with the right fittings.
Thanks!

kbernstein:
You MAY be able to reuse barbs and olive if you can get it out and if you haven't tightened the olive too much but it's heavily recommended to cut and put new barb/olive as you likely lose some seal. This is why you are often advised to leave as much hose as possible in the bike. If crimped properly the olive shouldn't come off anyway
You can pick up a pack of olive/barb/hose kits for 4 bucks on ali, or for 30 at your LBS who will urge you not to get them from aliexpress as they might explode. The olives are universal afaik but the barbs and hoses are not, i think the standard Ltwoo uses is BH59, same as shimano road
You seal the open hoses with a toothpick
And yes both ends of the hose have a barb and an olive

Serge_K:
Clear, thank you!

jonathanf2:
I'm curious with the hydraulic hoses on fully internal frames. On semi-internal frames you can just detach the stem/bar from the bike and pack the bar sideways next to the frame in a box.

On fully internal frames, is this not an option for travel? Do you have to detach the hoses for travel? Sounds like a big hassle if that's the case.

Serge_K:

--- Quote from: jonathanf2 on May 16, 2024, 06:49:53 PM ---I'm curious with the hydraulic hoses on fully internal frames. On semi-internal frames you can just detach the stem/bar from the bike and pack the bar sideways next to the frame in a box.

On fully internal frames, is this not an option for travel? Do you have to detach the hoses for travel? Sounds like a big hassle if that's the case.

--- End quote ---

That's maybe the biggest drawback of fully integrated bikes: you can't travel with them w/o major headache. There are rigid bike boxes where you dont have to detach the bars, precisely because of that (VERY expensive and take a ton of space when not in use).
It is changing a bit in that you have an increasing number of options that are fully integrated AND allow to detach the stem w/o unplugging everything, but it will take years to trickle down. There's a question of stiffness too: my integrated cockpit is super stiff. If tomorrow they start selling a version with more convenient cable integration, it may be a pool noodle.

Navigation

[0] Message Index

[#] Next page