Crankset options 165mm?

[vanbc]

Hello, curious about crankset options for my road bike build. Planning on Chinese groupset. Aware of Cybrei but curious about other good quality options.
165mm is a requirement.
Thank you

[biceryder]

I have just installed Lexon 165mm cranks on one of my bikes.  So far, I’m pleased but will need to put some miles on them to have a final verdict.

[00Garza]

Lots of options, or are you specifically looking for carbon?

[vanbc]

I am open to alloy or carbon.
Would like to be at least Shimano 105 or ultegra quality as comparison.

[ejump0]

somehow im the market for 165 4hole bcd110 cranks too..
For some reason r7000 cranks almost non existance, but theres some r7100 on aliEx at a lil premium.
I currently have r7000 passquest chainring. Im not sure if it fits nicely on r7100 cranks.

[erallen30]

You should get a Magnene PES pwoermeter crankset.

[jhearrtot]

@OP - this is what I use. The arm length can be adjusted to 160, 162.5, or 165mm

There are other lengths available too!


https://driveline.com.tw/product/15/58

[merlin]

I also use those driveline cranks at 140mm for triathlon. Have a 150mm set on my wife’s gravel bike as well. Nice that you can get 8 bolt.

[erallen30]

I also use those driveline cranks at 140mm for triathlon. Have a 150mm set on my wife’s gravel bike as well. Nice that you can get 8 bolt.

Damn, 140mm? That sounds crazy. I've used 155mm cranks and thought that was nuts.

[jonathanf2]

Damn, 140mm? That sounds crazy. I've used 155mm cranks and thought that was nuts.

155mm cranks? Sound like you're size deficient in several areas.

[zxcvbnmjm]

for alloy options i have used and recommend both xcadey cranks and fovno aurora

theyre both very light for alloy. i originally had the fovno auroras but swapped for xcadey because i prefered the 24mm spindle on the xcadey opposed to dub on fovno

[erallen30]

155mm cranks? Sound like you're size deficient in several areas.

Short cranks are often used for TT bikes