Any way to run cybrei style carbon cranks with a gravel 48t + 31/32t chainrings

[moodyedge]

Have an 11 speed yoeleo r11 with grx 801 2x 48/31, will be changing frames and want to run similar ratios but with a carbon crank. Is there a spider/chainring combination that would allow running the gravel style sub compact cranks on a elilee /cybrei/incolour crank arms on a road bike? I know rotor do a carbon gravel style crank, along with a couple of other brands but they are pretty ugly,

Cheers

[gribs]

These will work but I've no idea on the quality.

https://www.aliexpress.com/item/1005012963971322.html

[Sakizashi]

Have an 11 speed yoeleo r11 with grx 801 2x 48/31, will be changing frames and want to run similar ratios but with a carbon crank. Is there a spider/chainring combination that would allow running the gravel style sub compact cranks on a elilee /cybrei/incolour crank arms on a road bike? I know rotor do a carbon gravel style crank, along with a couple of other brands but they are pretty ugly,

Cheers

Praxis makes chainrings that are 48/32 and you need a 5x100 spider to make them work. The issue is that they need ones with little tabs cut out which I dont think any of these companies supplies. Bingham built makes one that works (Easton to Praxis 48/32) but it’s a bit on the pricy side. I think Power2Max also makes GRX chainring compatible power meter spiders for Easton cranks that should work.

[jonathanf2]

Shimano 4 bolt 48-31t chainrings:
https://www.ebay.com/itm/114305413552

[moodyedge]

Shimano 4 bolt 48-31t chainrings:
https://www.ebay.com/itm/114305413552

I was under the impression an inner 31 wouldn't work with the 110 shimano standard spider as its too small?
I'm in the UK so need to see if they are available here. Then how do they attach to a carbon crank? I presume there will be a spider that will allow for it.

[jonathanf2]

I'm in the UK so need to see if they are available here. Then how do they attach to a carbon crank? I presume there will be a spider that will allow for it.

It uses a special clamping setup, but it's compatible with 110bcd road cranksets. You can use a 4 bolt adapter or 4 bolt power meter spider to attach them.