Author Topic: RD Hanger Replacement Issue  (Read 1081 times)

AliPapa

RD Hanger Replacement Issue
« on: October 02, 2024, 08:39:37 AM »
Hey gang, I had an issue with my VB-R-099 (http://www.velobuild.com/products/-123) road bike.

The old RD needed replacement, after scouring the web (and this forum) I've found a replacement but it's somewhat longer, however other users report that it worked for them.

After the replacement the RD is touching the frame which I guess is not a good idea. I tried playing with b/h screws but that's not really helping.

Is this just the wrong RD hanger or am not adjusting it right?

A few photos attached.

Thanks!



jonathanf2

Re: RD Hanger Replacement Issue
« Reply #1 on: October 02, 2024, 11:20:00 AM »
Looks like you just need to adjust B screw first and then adjust the H screw.

Look at this photo:


If that doesn't work bring it to a bike shop. If they can't do it, the hanger probably isn't a good fit.

c.etzo

Re: RD Hanger Replacement Issue
« Reply #2 on: October 07, 2024, 02:54:07 AM »
seem a RD direct mount, you can try removing the b-link from the RD


and mount it directly to the hanger


ZacItaly15

Re: RD Hanger Replacement Issue
« Reply #3 on: November 20, 2024, 02:20:33 PM »
well you have to remove the derailleur arm to install the derailleur. But, where did you get the derailleur hanger shown in the photo? Looks like a CUBE derailleur hanger.
If you need, I can give you my stock derailleur hanger in favour of yours