Author Topic: SL8 Replica Build  (Read 87193 times)

Bonus79

Re: SL8 Replica Build
« Reply #60 on: May 03, 2025, 01:29:53 PM »
for those who have seen my white factor in the other thread, known for its smooth interal layup. The same seller has listed out his high end SL8 replica with replica darimo handlebar and seatpost

the weight is sub 700g for a size 54 painted frame, do note there will not be s-works/specialized decals.



he is selling it for 7000rmb including postage within china

wechat contact: ofo901

do note he is not selling on either taobao/aliexpress, so you will have to sort out the payment(he only accepts alipay transfer) and shipping (a forward shipper to ship your frame from the designated warehouse to your location)
What color is it?

MTB-Addicted

Re: SL8 Replica Build
« Reply #61 on: May 03, 2025, 02:28:58 PM »
Naked carbon

Tines

Re: SL8 Replica Build
« Reply #62 on: May 04, 2025, 12:30:59 AM »
That’s glacial metallic, isn’t it?

Sander2177

Re: SL8 Replica Build
« Reply #63 on: May 04, 2025, 06:12:03 AM »
for those who have seen my white factor in the other thread, known for its smooth interal layup. The same seller has listed out his high end SL8 replica with replica darimo handlebar and seatpost

the weight is sub 700g for a size 54 painted frame, do note there will not be s-works/specialized decals.



he is selling it for 7000rmb including postage within china

wechat contact: ofo901

do note he is not selling on either taobao/aliexpress, so you will have to sort out the payment(he only accepts alipay transfer) and shipping (a forward shipper to ship your frame from the designated warehouse to your location)


How heavy is that frame as the weight is obscured.

Regarding the Gen SL8, I’ve never seen a sub-700g painted frame in size 54cm—every one I’ve come across has been over 700g, with the RTP (Ready-To-Paint) finish typically being the lightest. There’s also the well-documented SL8 thread on Weight Weenies that supports this.

As for the fake Darimo seatpost at 134g—nothing impressive there. My genuine 350mm Darimo post comes in at just 104g. When I receive the TanTan frame, I plan to modify the supplied post by cutting it down and swapping out the cradle and bolts; I should be able to hit that weight easily.

I also own a Gen SL8 that came in at exactly 700g—even after custom paint job, it still weighed the same.

On the topic of fake Darimo handlebars: how heavy are those, really? I’ve looked into genuine Darimo bars, which usually weigh between 220g and 240g, but there have been a few reports of failures that made me hesitant. If Darimo’s own bars are having quality concerns, I doubt a lightweight Chinese replica would be any better or safer.

glepore

Re: SL8 Replica Build
« Reply #64 on: May 04, 2025, 08:09:22 AM »
The scale reads 774, so unless he weighed it with the post in, its within the normal range.

Sander2177

Re: SL8 Replica Build
« Reply #65 on: May 04, 2025, 09:20:51 AM »
The scale reads 774, so unless he weighed it with the post in, its within the normal range.

Ahh ok I thought 674!!
Someone said sub 700grams
Ok 774 is defo normal but still light as we know for China frames.
Most frames still considered SL at 1000g as we know.

Tines

Re: SL8 Replica Build
« Reply #66 on: May 04, 2025, 09:54:23 AM »
Looks like 684 to me too.
Shit placement of watermark.

OralMaster

Re: SL8 Replica Build
« Reply #67 on: May 04, 2025, 11:32:16 AM »

How heavy is that frame as the weight is obscured.

Regarding the Gen SL8, I’ve never seen a sub-700g painted frame in size 54cm—every one I’ve come across has been over 700g, with the RTP (Ready-To-Paint) finish typically being the lightest. There’s also the well-documented SL8 thread on Weight Weenies that supports this.

As for the fake Darimo seatpost at 134g—nothing impressive there. My genuine 350mm Darimo post comes in at just 104g. When I receive the TanTan frame, I plan to modify the supplied post by cutting it down and swapping out the cradle and bolts; I should be able to hit that weight easily.

I also own a Gen SL8 that came in at exactly 700g—even after custom paint job, it still weighed the same.

On the topic of fake Darimo handlebars: how heavy are those, really? I’ve looked into genuine Darimo bars, which usually weigh between 220g and 240g, but there have been a few reports of failures that made me hesitant. If Darimo’s own bars are having quality concerns, I doubt a lightweight Chinese replica would be any better or safer.

the frame weighs in at 674g, the fake nexum drag is 270g for 400-100 as claimed.

https://www.goofish.com/item?spm=a21ybx.personal.feeds.10.d9aa6ac2yGPYRg&id=854756128682&categoryId=50025467

Sander2177

Re: SL8 Replica Build
« Reply #68 on: May 04, 2025, 01:16:02 PM »
the frame weighs in at 674g, the fake nexum drag is 270g for 400-100 as claimed.

https://www.goofish.com/item?spm=a21ybx.personal.feeds.10.d9aa6ac2yGPYRg&id=854756128682&categoryId=50025467


Ok well I question the 674g 54cm frame weight myself
SL8 white paper 54cm frame unpainted is 670grams with painted 54cm frames in the 700g range.
As always there will be questions with these frames heavier or lighter.
But 4grams of paint hmmmm!

glepore

Re: SL8 Replica Build
« Reply #69 on: May 04, 2025, 01:46:12 PM »
I wouldn't trust that frame. Either someone did an odd tare on the scale or its almost 100g lighter than an actual sworks. Nah.

Sander2177

Re: SL8 Replica Build
« Reply #70 on: May 04, 2025, 04:31:30 PM »
I wouldn't trust that frame. Either someone did an odd tare on the scale or its almost 100g lighter than an actual sworks. Nah.

A counterfeit frame lighter than the genuine well that’s alarm bells already!!
So a defo Nah!
Enough alarm bells with Tan Tans X68 already  ;D

BeR

Re: SL8 Replica Build
« Reply #71 on: May 05, 2025, 05:29:09 AM »
Well, if you dont use resin, you can get a frame pretty light! Ask tantan :D

Or others from LC with their cheese frames ;).

Sander2177

Re: SL8 Replica Build
« Reply #72 on: May 05, 2025, 08:18:46 AM »
Or others from LC with their cheese frames ;).

Light Carbon and Tan Tan are getting it  :D ;D
Will be putting in my 50pence with Tan Tan tomorrow on the X68 and see what they say. Debating wether to do something publicly with Cores photos

WadaWada

Re: SL8 Replica Build
« Reply #73 on: May 19, 2025, 12:38:07 PM »
Little background info: I've been an early adopter on chinese parts ~8 years, started with wheels from light bicycle then framesets. I've been cycling since childhood but started getting serious in my adult years starting with mountain bikes then transitioned to road and gravel. I've spent a ton of $$ already and have ridden a few OEM brands. Was really impressed with the light bicycle wheels so this gave me the confidence to explore framesets. In 2019 i bought a 650B carbon hardtail frameset from Ebay and built it up. It's been ridden hard over some rough trails with zero issues. In 2020 i bought a LightCarbon LCR015-D which was my current bike until getting the SL8 replica 2 months ago. It's getting to a point now where the Chinese products are so damn good that i don't buy OEM bikes anymore. Even the accessories like chainrings, handlebars, etc.. i've had zero issues. When it came to this frameset i was a little skeptical but more curious since this was a replica of a current popular frameset. Was it possible to get similar performance for a fraction of the cost? So far i have to say yes. Durability remains to be seen but i've been hammering the crap out of this bike with no ill effects (i weigh 190lbs). It's a size 52 built up not really weight weenie but with pedals, cages and computer mount about 6.8kg. My long time bike mechanic says everything looks really good, only issue was the headset cover provided is cheap and flimsy and caused it to bind up there but he fixed it with some shims. I have included some internal pics but the frameset looks really clean inside from what i can tell, no sharp edges when running my fingers inside the BB, headtube, seat tube. I'm really blown away by how this thing rides and performs, it seems to have the same qualities as all the reviews given. If you're interested just search for light road frameset on Aliexpress, you'll know what it is when you see it. Colored me impressed!!

Build 8/2024

Frameset: 52CM Replica frame (685 grams) came with fork (345 grams), seatpost, 1 piece handlebar (no mounts), der. hangers, headset accessories
Wheels&Tires: Light Bicycle AR56, GP 5000 S TR 700x28 tubeless with Muc-Off valves and sealant
Drivetrain: 1x Force AXS 10-28, Rotor Qarbon 50T, Rotor 165mm Kapic Carbon, Stone 110BCD Rotor Adapter, Token BSA BB, KMC Gold/Black X12, Speedplay Pedals
Brakes: 2024 Force, Ashima 160/140mm rotors
Shifters: 2024 Force
Bartape: Deda Carbon
Seat: S-Works Power 155 Mirror
Cages: Arundel Mandible

any updates? hows the frame holding up, also your frame looks very legit compared to other sellers

Bongio

Re: SL8 Replica Build
« Reply #74 on: August 27, 2025, 05:24:07 AM »
Hi guys, I have a sl8 clone from yohobike. Had to rework or grind some details, but on the whole it has been inconspicuous and good to ride for a few 100km. The handlebar as a Roval Rapide clone is a bit too flexible, but works well. I also suspect that the sl8 clones all come from the same factory and it depends on the seller whether, for example, the BSA housing or the brake caliper mounts are machined with a milling tool before shipping.
By the way... the original sl8 seatpost fit very well. Had to buy the longer Version.

Hello BigApple, could you give me an update on your SL8 clone after a year?
I'm about to buy an SL8 clone frame and I'm undecided between Tantan (TT-X68) and Yohobike.
You said you had to rework/modify some details, could you explain exactly what you did?
Can you confirm that the original SL8 seat post fits the Yohobike clone perfectly?
I ask because I would like to use an original SL8 seatpost and someone told me that the TT-X68 one is different from the original.


Thank in advance