Author Topic: Spcycle New Mold SP-R088 Carbon Road Frame  (Read 934018 times)

Dr J

Re: Spcycle New Mold SP-R088 Carbon Road Frame
« Reply #810 on: September 02, 2025, 10:45:30 AM »
Hi everyone,
Im thinking about getting an integrated handlebar, but I’m not sure which models fit well. Could you share what integrated handlebars you are using on your R088?

Thanks a lot!
Just look through this topic; most have listed it on their build.
To sum some up:
Kocevlo Integrated bar
Balugoe (I used this one, its a roval lookalike)
Lexon thin Line

These are some of the most used here

Rajmundx

Re: Spcycle New Mold SP-R088 Carbon Road Frame
« Reply #811 on: September 02, 2025, 12:51:41 PM »
Which expander do you use in your build? That what comes with a frame or something else?
I have DEDA handlebar and stem and I wonder that I need to buy DEDA expander or what?

Dr J

Re: Spcycle New Mold SP-R088 Carbon Road Frame
« Reply #812 on: September 02, 2025, 01:56:06 PM »
Which expander do you use in your build? That what comes with a frame or something else?
I have DEDA handlebar and stem and I wonder that I need to buy DEDA expander or what?
The one that comes with the frame is fine, but it's a little short. I think a lot of us changed it to a longer expander (especially when running spacers)

Rajmundx

Re: Spcycle New Mold SP-R088 Carbon Road Frame
« Reply #813 on: September 02, 2025, 02:18:09 PM »
The one that comes with the frame is fine, but it's a little short. I think a lot of us changed it to a longer expander (especially when running spacers)

Yes, it’s little too short. Which expander do you use if I may ask?

Dr J

Re: Spcycle New Mold SP-R088 Carbon Road Frame
« Reply #814 on: September 02, 2025, 03:43:59 PM »
Yes, it’s little too short. Which expander do you use if I may ask?
Ich habe das hier gerade auf AliExpress gefunden: 6,33€ | Fahrrad Headset Expander Top Cap Stern Mutter Stecker Bolzen Vorbau Expanding Mutter Schrauben Für Fahrrad 1 1/8 "Vordergabel Expansion Schraube 22-25mm
https://a.aliexpress.com/_ExEkTOQ This one

rcwsr

Re: Spcycle New Mold SP-R088 Carbon Road Frame
« Reply #815 on: September 02, 2025, 05:12:18 PM »
Yes, it’s little too short. Which expander do you use if I may ask?

I’m using a cane creek ancora as recommended further back in this thread. It’s nice and light and a bit longer than what came with the frame. It was easy to install however I can’t for the life of me get it back out in order to trim the steerer by 5mm.


alfiomotrambo

Re: Spcycle New Mold SP-R088 Carbon Road Frame
« Reply #817 on: September 03, 2025, 05:52:16 AM »
I don't understand the difference between these two Lexon handlebars:

https://it.aliexpress.com/item/1005005939677279.html

https://it.aliexpress.com/item/1005006309729622.html

The first one is €147 from the Lexon Store, and the second one is €108, also from the Lexon Store. Are they the same product?

MartyCroky

Re: Spcycle New Mold SP-R088 Carbon Road Frame
« Reply #818 on: September 03, 2025, 07:06:46 AM »
Have been eyeing this frame for a bit, reccon I'm going for the Chameleon green paint.

What's you guy's favourite paint colours?

durianbae

Re: Spcycle New Mold SP-R088 Carbon Road Frame
« Reply #819 on: September 03, 2025, 06:06:09 PM »
Hi, longtime listener, first time caller here. I have read this entire thread through at least a couple times now and it's been very helpful.

Just to add some more data points here – I ordered my own frame about a week and a half ago and it shipped today. Spcycle was responsive and helpful over Aliexpress messaging. I picked chameleon blue (glossy, size 54cm). First three photos attached here are what they sent me before they shipped (I asked them to share pics before it got packed). The last photo is admittedly not my photo (sorry if not allowed!), but a pic someone else posted of their Spcycle gravel frame in chameleon blue. I was undecided on color until I saw this – damn. All my other bikes are pretty plain and I thought this color looked sexy AF. Admittedly now, in regular light, like in the photos they sent me, I do not like this paint color as much (it leans very purple for me), but oh well. Really, will I ever be 100% satisfied with all my bikes? Lol...not sure. about that.

Anyway, can't wait to receive it. It's my first carbon bike although I have many (too many) others. I plan on building it up with Dura-Ace r9170 and some Tagoola wheels that should also be arriving next week.

One thing I will note – I use Rakuten frequently as an online shopping portal (free to use) and have it linked to my Amex. They happened to be running a 25x points back promo the day I ordered (they do this every now and then and I was waiting for this). I ended up getting enough Amex points from this one purchase to get a domestic air ticket (or whatever). Nice bonus! If you don't use Amex you can also have it convert to cash back.

Will post more pics once I have the frame in hand.

raisinberry777

Re: Spcycle New Mold SP-R088 Carbon Road Frame
« Reply #820 on: September 03, 2025, 08:20:33 PM »
Hey - that's my pic! ;D (I don't mind at all!)

Yes that's the SPCycle chameleon blue - if it helps out I can take photos of it in other lighting scenarios. I'm still very happy with the colour - it's more blue in some lights and more purple in others.

iamdanielbike

Re: Spcycle New Mold SP-R088 Carbon Road Frame
« Reply #821 on: September 03, 2025, 09:35:54 PM »
I think with raw ud matte, the underlying carbon texture will have some sections that look flat black and other sections with fiber mesh. Raw ud glossy looks more like marble with varying fiber textures under a glossy clear coat.

I typically use clear nail polish with the glossy clear coat. It tends to hide blemishes quite well. Though I use this clear protection decal film on my frame. It blends well with the glossy clear coat and isn't noticeable whatsoever. Best to lightly apply it with a blow dryer or heat gun and it doesn't leave any adhesive residue when removing. I've tried the helicopter clear tape and I think that stuff sucks. It looks ugly and leaves residue when you remove it.

Protection decal film in black and clear:
https://www.aliexpress.us/item/3256806808712099.html

As a reminder, you can use gasoline to break down the residue in case it happens again with any other tape or protective film. Just don't leave it too much time over raw uncoated paint
Enjoy life and make a better world for everyone.

iamdanielbike

Re: Spcycle New Mold SP-R088 Carbon Road Frame
« Reply #822 on: September 03, 2025, 09:50:23 PM »
Has anyone compared this frame against a reference western brand frame such as Specialized Tarmac SL7, Trek Emonda, Orbea Orca, Canyon Ultimate, Cannondale Supersix, etc?

I've read about 30 pages of this topic but haven't find a first hand comparison. Another user reported gassing out on a group ride against brand name bikes but that doesn't really say the bike can't transfer power. He could have been tired that day. Honestly, most people on this topic have been dropping great comments about the frame.
Enjoy life and make a better world for everyone.

durianbae

Re: Spcycle New Mold SP-R088 Carbon Road Frame
« Reply #823 on: September 03, 2025, 10:03:42 PM »
Hey - that's my pic! ;D (I don't mind at all!)

Ha, sorry mate! You should get a commission!

I actually think I first saw your bike posted on Reddit, when I was Googling examples of chameleon blue paint jobs. Probably like a lot of people on this thread, I was looking for more examples and also indecisive about choosing my own. Your bike is gorgeous and I'm glad to hear you're still happy with it! If you want to post more pics that would be nice but please don't feel like you have to, obviously it's too late for me to change my mind, haha.
« Last Edit: September 03, 2025, 10:05:19 PM by durianbae »

DavidG

Re: Spcycle New Mold SP-R088 Carbon Road Frame
« Reply #824 on: September 04, 2025, 12:02:32 AM »
Doubting whether or not to get their integrated handlebar with the frameset.

For those who got it with the bike......
1-What's it like?
2-Does it flex much?
3-What's the 130 drop like?
4- what's 9 degree angle like?
5- Also no flare at all, right?

It sucks a bit that the 38cm is only offered with 80/90 stem lengths.

Sorry a lot questions there. Hope someone can help me make up my mind.