Author Topic: New model DFS carbon crank for road bike ultralight Bicycle Crankset  (Read 2176 times)

Tines

Re: New model DFS carbon crank for road bike ultralight Bicycle Crankset
« Reply #15 on: May 12, 2025, 02:07:57 PM »
Thank you very much.
Yeah at least from the fotos it’s hardly noticeable.
Maybe check the weivhtweenies thread for sram red crank. Many sanded it down to remove the SRAM logos.

toxin

Re: New model DFS carbon crank for road bike ultralight Bicycle Crankset
« Reply #16 on: May 12, 2025, 03:00:57 PM »
According to there test data it is
And almost on par with SRAM Red

this is for the dub spindle

kubackje

Re: New model DFS carbon crank for road bike ultralight Bicycle Crankset
« Reply #17 on: May 12, 2025, 03:47:38 PM »
According to there test data it is
And almost on par with SRAM Red

Do they have deformation data for titanium spindle version ?

Sander2177

Re: New model DFS carbon crank for road bike ultralight Bicycle Crankset
« Reply #18 on: May 12, 2025, 03:48:10 PM »
this is for the dub spindle

didn’t really look closely, sorry.
I don’t think there’s much difference to be honest—titanium is stiffer than aluminium anyway.
From what I’ve seen in the test data, you’re really splitting hairs between the cranks.
Any differences are probably negligible in real-world use, so I’m not too fussed.
I’ve got the Cybrei DUB on my SL8 and that’s a fantastic crank—plenty stiff.
I only went with the 24mm version this time because I’ve got a 24mm Hambini BSA bottom bracket lying around
SL8 Custom Green Over Naked Carbon 54CM 6.11kgs RhinosWorkShop Build

X68 UD Gloss Bare Carbon 54cm
6.4kgs Current Estimate

Tines

For elilee the 24 is slightly less stiff according to their chart.

Hm, does the DFS also have a hex key bolt on the drive side?

Pistonbroke

Can I ask what the price delivered is please.

Sander2177

Can I ask what the price delivered is please.

Pistonbroke
Its $329USD on there Shopify page.
I paid $285usd and I got an additional discount as I bought a wheelset as well so was probably more $250usd
I would message and ask them +86 188 5000 7287
SL8 Custom Green Over Naked Carbon 54CM 6.11kgs RhinosWorkShop Build

X68 UD Gloss Bare Carbon 54cm
6.4kgs Current Estimate

Sander2177

For elilee the 24 is slightly less stiff according to their chart.

Hm, does the DFS also have a hex key bolt on the drive side?

Hopefully the video work this time!
« Last Edit: Today at 02:36:45 AM by Sander2177 »
SL8 Custom Green Over Naked Carbon 54CM 6.11kgs RhinosWorkShop Build

X68 UD Gloss Bare Carbon 54cm
6.4kgs Current Estimate

Tines

Great thank you very much

Ah I was wrong. The non drive side is interesting. So no two extractor bolts on both sides .

Sander2177

Great thank you very much

Ah I was wrong. The non drive side is interesting. So no two extractor bolts on both sides .

You only need the Bolt on the drive Side this is the same as Elilee and Cybrei
It would look better finished on the Non-Drive side like the Cybrei  or Elilee with a diffrent cover cap or blank cap
SL8 Custom Green Over Naked Carbon 54CM 6.11kgs RhinosWorkShop Build

X68 UD Gloss Bare Carbon 54cm
6.4kgs Current Estimate