Author Topic: New model DFS carbon crank for road bike ultralight Bicycle Crankset  (Read 1387 times)

DFScarbon

https://dfscarbonwheels.myshopify.com/products/dfs-carbon-road-crank-ultralight-bicycle-crankset-dub-29mm-165-167-5-170-172-5mm

This is our new design crank this year, using one-piece molding technology,
1. Carbon fiber material, improves the overall rigidity of the crank, achieves a balance between weight and rigidity,
2. One-piece molding, ensures the performance and strength of the crank
3. Sealing technology, effectively improves durability, worry-free riding

Cranksets Feature

Using Toray high modulus carbon fiber, crankset only 315g (167.5mm Cranksets only )
Super high rigidity, the second generation of dual-channel technology improves crank rigidity by 12%
Highly compatible 24mm axle, adaptable to more frames
Titanium axle core brings unimaginable rigidity and durability
Passed 1960N 20w crank fatigue test and 5600N crank damage test, far exceeding EU standards

Brand:DFS

Model:DFS C1

Compatibility :12S / 11S

Crank Material : T800+7075 Aluminum spindle / Titanium spindle

Crank Length :165mm,167.5mm,170mm,172.5mm

Applicable: Shimano micro spline (MS) Interface sprocket / EASTON Interface sprocket

B.C.D : SHIMANO Direct Mount

Q-Factor:149/151mm

Weight:315g+ - 10g(170mm)Aluminum spindle / Titanium spindle 325g+ - 10g,

BB Compatibility :29mm/24mm Bike Bottom     wide  68mm/73mm 

 [FRAME COMPATIBILITY] BSA /Rotor BSA30 /BB30 | BB386 | BB86 | PF30 | T47
 

We support wholesale, support customized Logo and appearance, if you need please contact customer service!

+8618850007287 wechat/whatsapp the same number



DFScarbon

Re: New model DFS carbon crank for road bike ultralight Bicycle Crankset
« Reply #1 on: April 14, 2025, 03:06:21 AM »
Titanium spindle

Bigbobby1482

Re: New model DFS carbon crank for road bike ultralight Bicycle Crankset
« Reply #2 on: April 14, 2025, 04:07:50 AM »
Will you make a MTB version of the carbon cranks? eg. Wider q factor and chainline

DFScarbon

Re: New model DFS carbon crank for road bike ultralight Bicycle Crankset
« Reply #3 on: April 14, 2025, 07:52:19 PM »
Will you make a MTB version of the carbon cranks? eg. Wider q factor and chainline
later may creat it,now just road bike

DFScarbon

Re: New model DFS carbon crank for road bike ultralight Bicycle Crankset
« Reply #4 on: April 14, 2025, 07:53:20 PM »

Hey Angler! Is that you?
You finally made a post here!

It’s Stephen

yeah,trying it

Lotnik

Re: New model DFS carbon crank for road bike ultralight Bicycle Crankset
« Reply #5 on: April 15, 2025, 06:38:44 AM »
This 916g set is tempting. Do you know the spec?

Sander2177

Re: New model DFS carbon crank for road bike ultralight Bicycle Crankset
« Reply #6 on: April 23, 2025, 04:10:29 PM »
This 916g set is tempting. Do you know the spec?

https://dfscarbonwheels.myshopify.com/

Think is there T1000 ultralight rims
THR RX hubs 200g a set  21/24holes I think
And superlight carbon titanium spoke which are like 1.6g each
SL8 Custom Green Over Naked Carbon 54CM 6.11kgs RhinosWorkShop Build

X68 UD Gloss Bare Carbon 54cm
6.4kgs Current Estimate

Sander2177

Re: New model DFS carbon crank for road bike ultralight Bicycle Crankset
« Reply #7 on: April 29, 2025, 07:57:56 AM »
Ok i recieved my DFS carbon crank yesterday and they are a new player as some of us know to this forum

24mm Titanium  Spindle
165mm Crank -  coming in at the advertised 320g which is right on the nose!
13g for sundries etc: lockring, pedal washers, and shims (though I may only need one or no shims for install).

Shipping took as long as quoted, and everything was very well packed, so no issues there.

The only downside is there are no installation instructions. I reached out to the company, and it seems they’ve produced the crank but haven’t yet managed to create a manual, and they ae also in the process of locating to a new larger facility so I can understand if things are a little all over the place
Not ideal, as you either have to rely on your own knowledge or risk damaging the product. Carbon fiber products, in particular, need instructions due to their delicate nature and the need for specific torque settings. I was advised to use the Cybrei manual, as it’s essentially the same. No big surprise, as their cranks are fairly generic at this point.

Now, I just need to wait for the frame I ordered and see how the installation goes and how the cranks perform. But so far, I’m happy with the quality and finish. Overall, I’ve had good communication during the purchase process, and the quality of the products has been solid. I hope the company takes note of the feedback about the instructions, as that’s really the only thing left to address.

« Last Edit: April 29, 2025, 08:16:02 AM by Sander2177 »
SL8 Custom Green Over Naked Carbon 54CM 6.11kgs RhinosWorkShop Build

X68 UD Gloss Bare Carbon 54cm
6.4kgs Current Estimate