Author Topic: Velobuild AERO GRAV Frame  (Read 522604 times)

ricchirock

Re: Velobuild AERO GRAV Frame
« Reply #330 on: September 08, 2025, 02:29:05 AM »
Cant wait to ride mine... Lot of people are telling about the frame stiffness. For sure it's because of the aero shape of the seatpost. I'm wondering if the bb area is same stiff as the seatopost, I think that it would make a difference in pedalling efficency.

samsam

Re: Velobuild AERO GRAV Frame
« Reply #331 on: September 09, 2025, 12:02:09 AM »
I just went out for a ride in the rain and mud, the varnish is very very fragile. I almost removed everything around the wheel arches. I will have to consider re-varnishing the entire frame later.

pavlo.k

Re: Velobuild AERO GRAV Frame
« Reply #332 on: September 09, 2025, 05:36:17 AM »
Temporary build... I took the wheels and crankset from my old gravel bike to get an idea.
The bike looks fantastic in terms of geometry and design. There's plenty of tire clearance and the weight is good. I think the final weight will be around 8,0/8,1 kg with these wheels and around 7,2/7,3 kg with the road wheelset.

Nice color. I would be careful with painting the seatpost though. A friend of mine have pinarello f7 with a painted seatpost and the clamp keeps getting stuck in the frame because it bites into the paint on the seatpost

Motus

Re: Velobuild AERO GRAV Frame
« Reply #333 on: September 10, 2025, 03:42:05 AM »
Nice color. I would be careful with painting the seatpost though. A friend of mine have pinarello f7 with a painted seatpost and the clamp keeps getting stuck in the frame because it bites into the paint on the seatpost


The paint reaches just below the rubber cover.

Anyway, this is the road/mixed built.. I haven't decided yet the crankset, for now I'll use the old Force 22 with a 40t chainring.


Requiem84

Re: Velobuild AERO GRAV Frame
« Reply #334 on: September 10, 2025, 06:35:03 AM »
For anyone not using the Velobuild handlebar, which spacers did you use?

Unfortunately the Rose Gravel cockpit came without any spacers

BikerJens

Re: Velobuild AERO GRAV Frame
« Reply #335 on: September 12, 2025, 01:28:37 AM »
People that have been so kind to post pictures of their build: How deep rims are you running?

I'm getting my frame soon, but have not ordered wheels yet. Was thinking 38 mm, but tempted to go 50 mm purely because is might look better on a aero'ish looking frame.
Tall person with gigantic CdA

Whiteman83

Re: Velobuild AERO GRAV Frame
« Reply #336 on: September 12, 2025, 03:06:41 AM »
People that have been so kind to post pictures of their build: How deep rims are you running?

I'm getting my frame soon, but have not ordered wheels yet. Was thinking 38 mm, but tempted to go 50 mm purely because is might look better on a aero'ish looking frame.

XS frame - 40mm depth, 30mm inner width, Carbon T1000


Motus

Re: Velobuild AERO GRAV Frame
« Reply #337 on: September 12, 2025, 04:01:43 AM »
For those who used the original headset: is it normal for there to be no "connection" between the centering ring and the cover (the first spacer)?  :o
Usually, there's a pin, just like there is between the spacers and the handlebars.

sbixify

Re: Velobuild AERO GRAV Frame
« Reply #338 on: September 12, 2025, 04:56:12 AM »
After messing up a few times (wrong chainrings, too short chain, realizing I miss parts etc.), I’ve now had 6-7 rides on my new bike. I hope to get the weight down to around 8.5 kg next year.

Frame: Size M with integrated bars (380/100 mm) in Pearl White
Wheels: Elitewheels Aero+ Gravel (45 mm depth, 32 mm internal width)
Group: SRAM Rival E1 13-Speed
Crankset: Magene P515 Powermeter
Chainring: WolfTooth 46T 110bcd with Drop-stop B
BB: Senicx T47
Saddle: Ryet

Full build weight: 8.9 kg (with pedals, bottle cages, Wahoo mount etc.)
Total cost: ca. 3.000 EUR (with a few tools, titanium bolts etc.)

First impressions:
This bike is fast! Even though I’ve been without a bike for 10 weeks (and in poor shape), I set a few PRs already. I feel it’s a lot faster on smooth gravel and pavement than my old Grizl CF (Rival XPLR and Zipp XPLR 303S). On rougher terrain, I’m not sure what’s fastest, the Grizl felt a bit more stable. But rough terrain is rare in my area, so I’ll happily take a little beating once in a while.

The Rival group is awesome. Coming from the 12-speed version, the brakes are miles better, the hoods are more comfortable and the extra cog on the cassette makes things a little more smooth. I miss my old XPLR 303 S wheelset a little (maybe because it looked cooler), but the Elitewheels are also awesome and a little lighter than the Zipp wheels.

Future upgrades:
- 48t aero chainring
- Lighter pedals (have XTR in stock that needs service)
- Pathfinder Pro TLR 45 or the new Caracal Race in 45
- Different handlebar and stem (I need a little shorter reach)

(sorry for the non-drive side image - and yes, the direction of the front tire is wrong in the first picture 8) )

conradhughes

Re: Velobuild AERO GRAV Frame
« Reply #339 on: September 12, 2025, 08:03:07 AM »
Asked for a burnt terracotta with a satin (50/50 ish matte/gloss) clear, I got metallic copper, also the same decal printed for both L + R sides - although that was really my fault, I should have sent them the R (drive side :( ) decal too. I asked them to not place a decal but mask the paint, so it's in negative space. Then, the fork is raw + satin (looks nice in the sun) and insides are also burnt orange/copper. I'm really happy with how it turned out considering the price. I got some wax and some brown dye, mixed the two of them, and applied to the frame just to knock the color down ever so slightly in terms of brightness. Either way, I'm happy and I'd do their custom painting again.

Build:
Frame in L
LightBicycle WR45s
50mm G-One RX/R front/rear (tons of room in the front, would be happy to fit a 2.25 in there, would probably do 2.1 in the rear too)
Rival XPLR derailleur
Force XPLR hoods + brakes (wanted the bonus buttons)
EVOSID fake 5DEV MTB cranks 165mm (spindle is too long, ordered a smaller one. Until then, 8mm spacer on the LHS lol)
Ti bottle cages
RYET saddle
Bikedoc 34/40 bar + Kalloy UNO Project 120mm stem

Weighs about 8.8kg with pedals etc. - 8.3 with the road wheelset and tires on. The crank is pretty heavy, I used Ti bolts on the frame to drop a handful of grams. Derailleur/crank/cassette could easily drop 500-600g if I spent more, but all in, the cost was about £2200. Can't argue with that

I'm 197cm and all torso and the stem works great for me, but it's long.
« Last Edit: September 12, 2025, 08:06:16 AM by conradhughes »

jfcb

Re: Velobuild AERO GRAV Frame
« Reply #340 on: September 12, 2025, 10:48:04 AM »
Asked for a burnt terracotta with a satin (50/50 ish matte/gloss) clear, I got metallic copper, also the same decal printed for both L + R sides - a......


Did you had the chance to weigh the frame as well? I'm curious about the weight of a painted frame size L.

hazzer19

Re: Velobuild AERO GRAV Frame
« Reply #341 on: September 14, 2025, 03:37:34 PM »
Just finished up an AeroGrav build. Only took it for a short 8Km shake out ride but it's feeling really good so far. Moved over most of the components from my VB GF-002 build:

- VB Wave wheels 45mm
- VB integrated bars
- GRX Di2 groupset
- Oval Woolftooth chainring
- Stages left crank PM
- Token T47 BB
- Pirelli Cinturato Gravel RC 45 tires set up tubeless
- Shimano XT SPD pedals
- Fabric saddle
- Supacaz tape

« Last Edit: September 14, 2025, 03:39:31 PM by hazzer19 »

conradhughes

Re: Velobuild AERO GRAV Frame
« Reply #342 on: September 15, 2025, 04:31:48 AM »
Did you had the chance to weigh the frame as well? I'm curious about the weight of a painted frame size L.

I did not, because I am dumb 8)

Motus

Re: Velobuild AERO GRAV Frame
« Reply #343 on: September 15, 2025, 12:26:40 PM »
This is mine almost finished.
With these tires (Panaracer Gravelking 38mm) on tarmac it is very fast while still allowing me to ride on dirt roads and fields that I couldn't do with real road tires.
I have a second wheelset with Thunder Burts.

I just need to get a crankset/power meter and put some stickers on it.
The options are Red, Big Rock, or Leese + Xcadey spider.

The Red is the lightest, but the others have a 24mm axle, so I can easily move them from one bike to another.

Or I'll keep the Force 22 and get the Favero MX.

It's a tough choice  ;D

Unknownftp

Re: Velobuild AERO GRAV Frame
« Reply #344 on: September 15, 2025, 01:17:00 PM »
Just finished up an AeroGrav build. Only took it for a short 8Km shake out ride but it's feeling really good so far. Moved over most of the components from my VB GF-002 build:


Glad to see it on the forum after seeing it on their IG