XM Carbon Speed - "Gran Tourismo" Frameset

[Jonnan_NOR]

What do I need for di2 battery installation in the seat post?

[rsw42]

What do I need for di2 battery installation in the seat post?

Nothing, it comes with a wedge that goes into the Seatpost and holds the battery, when you tighten the screw

[Wattwurm]

So, has anyone gotten annother frame and is willing to share the experiences and some pictures. Im interested in the different Paintjobs and decals options.
Is the seatpost issues solved?
Thx alot
WW

[Dewa6975]

I posted all the different options a few page back.
Lots of member posted their bike too, have a look !

On another note, I found that the rear trough axle is a bit too long on my frame, causing it to hit the end of the rear axle drivetrain side and preventing my axle to completely thread all the way.
That causes some play in the rear wheel, very annoying. I had to put a screw head to artificially shorten my axle to solve the issue.
Can someone please send me the length of their rear through axle ? Mine is between 174mm.

[PeterXu]

I posted all the different options a few page back.
Lots of member posted their bike too, have a look !

On another note, I found that the rear trough axle is a bit too long on my frame, causing it to hit the end of the rear axle drivetrain side and preventing my axle to completely thread all the way.
That causes some play in the rear wheel, very annoying. I had to put a screw head to artificially shorten my axle to solve the issue.
Can someone please send me the length of their rear through axle ? Mine is between 172 and 173mm.

We produced the axles in same batch production, the length must be correct. No one else has this problem, not sure if you didn't screw the axle correctly or not.

[Jonnan_NOR]

Cant wait to join the club

[patliean1]

Hot diggity I want that shade of white if I ever get my hands on an XMCS frameset. Silver decals.

Congrats!

[Jonnan_NOR]

1130g with a 3-stage paint
Found a picture in the thread showing 1018gr with normal paintjob so 100gr extra. With uhd hanger and bottle cage screws.

Whats the hole under the hanger used for?

Also, the hardware included a thin metallic washer. Where is that used?

[Mlesna]

Sorry for the silly request, but I cant find a link to the frame and I cant find it on xmcarbonspeed.com. Cany anyome help?

[CycOps]

Here you go:
https://www.xmcarbonspeed.cc/products/xmcs-gran-turismo-frameset

Cheers from Friedrichshain

[bfish713]

1130g with a 3-stage paint
Found a picture in the thread showing 1018gr with normal paintjob so 100gr extra. With uhd hanger and bottle cage screws.

Whats the hole under the hanger used for?

Also, the hardware included a thin metallic washer. Where is that used?

Not sure about the hole under than hanger, but that thin washer I beleive is used to interface the fork/steer tube and the lower bearing in the headtube.  But without a picture you could be referring to something different.  Also I'm just going off memory from my build.

[Jonnan_NOR]

I’ve never installed di2 before but I suppose it goes thru the same hole as a mechanical installation and I’ll have to plug the other mysterious hole.

As for the washer, I attached picture.

[PeterXu]

1130g with a 3-stage paint
Found a picture in the thread showing 1018gr with normal paintjob so 100gr extra. With uhd hanger and bottle cage screws.

Whats the hole under the hanger used for?

Also, the hardware included a thin metallic washer. Where is that used?

Looking forward to your final build. The holes you mention, one is for Di2 , the other is for traditional mech

[Mariuszuzd]

It's not mine, it belong to my colleague, but she bought it as geometry is good for her Black raw black, ultegra DI2, proway 40- mm wheels and Avian Handlebar. I will ask for weight ,however she has very heavy Spec saddle - 168 mm. Overall, she is very satisfied and happy! 

[CycOps]

Hambini Gran Turismo video out now!