Zen Carbon Wheels Xiamen

Started by Sander2177, June 11, 2025, 10:39:44 AM

Previous topic - Next topic

Sander2177

Quote from: ediryppah on November 13, 2026, 03:27:17 AMOrdered a pair of Vaporlite II 60mm deep with the 25mm internal, 36mm external at the widest point. I'm not even sure what tire width to run with them to optimize for aero. 30mm that blows up is my best guess.

I have these best fit in my opinion is 30mm. Width as measured just over 32mm. But I run a labeled 32mm in rear so just over 33mm WAM


SaunaBiker55

Quote from: ediryppah on November 13, 2026, 03:27:17 AMOrdered a pair of Vaporlite II 60mm deep with the 25mm internal, 36mm external at the widest point. I'm not even sure what tire width to run with them to optimize for aero. 30mm that blows up is my best guess.

Waiting for delivery on mine.  Going 30 front and 32 rear

Rolle2k

I'm going to order Vaporlite II 60mm later, but i will run 32c on them.. Should be around 34mm WAM with GP5000 S TR.
Thinking about going 24/24 Ti aero spokes instead of carbon. Not shure yet though.
I'm only 69kg, so i don't think flex will be that of an issue for me anyways.

ZenCarbonBike

Hello Everyone

Customer wheelset
VaporLite II, combining our Extreme Ultralight carbon rims 120kg load limitation with silver Sapim CX-Ray stainless steel spokes and H-Works hubs.

Full Specifications

* Front: 50 mm depth / 34 mm external width
* Rear: 60 mm depth / 36.32 mm external width
* Internal width: 25 mm front and rear
* Rim profile: Hooked
* Carbon layup: Extreme Ultralight
* Finish: UD Satin
* Branding: Laser-etched ZEN logos
* Spokes: Silver Sapim CX-Ray stainless steel
* Nipples: Silver brass
* Hubs: Silver H-Works SR318

Actual finished wheelset weight: 1,315.6 g

ZenCarbonBike

Another VaporLite Customer Wheelset

ZEN CARBON | VAPORLITE ORIGINAL 50/55 MM

This time featuring the new DT Swiss carbon-spoke-compatible hubs.

Wheelset Specifications

* Model: VaporLite Original
* Front rim: 50 mm depth
* Rear rim: 55 mm depth
* Internal rim width: 23 mm
* External rim width: 30 mm
* Rim profile: Hooked
* Carbon layup: Extreme Ultralight
* Finish: UD paint-free matte
* Hubs: New DT Swiss carbon-spoke-compatible hubs
* Spokes: 3.1 mm carbon spokes
* Individual spoke weight: 2.1 g
* Spoke configuration: 24 front / 24 rear
* Finished wheelset weight: 1,106 g

JB007

Quote from: Sander2177 on October 05, 2026, 03:39:03 AMhave a set of these, although I haven't ridden them yet as my new SL9 build is taking so long to come together with the new paint and waiting for a few parts.

Personally, I think these rims are best suited to 30–32 mm tyres. I have a 30 mm tyre fitted on the front and it measures just over 32 mm on the rim. I don't have a photo of the rear measurement, but from memory the 32 mm tyre also measured a little over its stated size.

You have to remember that the actual tyre width once fitted can be quite different from the labelled size, particularly on a wide internal rim. So despite the 36 mm maximum external width of the rim, I personally wouldn't be looking to run 34 or 35 mm tyres on these wheels. 30–32 mm would be my choice.

Have you riden your Vaporlite II 60 mm 20/20 4.0 mm spoke wheels in the meantime and could share some experience? I am especially interested in the comparison to your other carbon spokes wheels with a) 24 spokes (more spokes) and b) thinner 3.2 mm spokes.

Sander2177

Quote from: JB007 on November 17, 2026, 10:28:07 AMHave you riden your Vaporlite II 60 mm 20/20 4.0 mm spoke wheels in the meantime and could share some experience? I am especially interested in the comparison to your other carbon spokes wheels with a) 24 spokes (more spokes) and b) thinner 3.2 mm spokes.

Hi mate yeah, I've ridden them, but not as much as I'd have liked, to be fair. My SL9 build took longer than expected, so I've probably only done around 300 km on the VaporLite II 60s so far.

I've had absolutely no issues with stiffness, though. To be honest, I've never really had any stiffness problems with any of my carbon spoke wheels.

I did actually consider going with the 3.2 mm hidden nipple spokes on the VaporLite wheels, but the weight difference was so small that I thought I'd give the 4 mm spokes a go.

For reference, the spoke weights including nipples are approximately:

3.2 mm hidden nipple: 2.1 g
3.1 mm regular nipple: 2.1 g
3.95 mm regular nipple: 3.5 g
4 mm hidden nipple: 2.7 g

So you're only sacrificing around 0.6 g per spoke by going with the wider 4 mm hidden nipple version. Across 40 spokes, that's only 24 g. I thought it was worth trying them.

I'm around 80 kg, and so far they've been absolutely fine.

I've also got the DFS 50/55 mm wheels, which weigh 1,038 g. Those use 3.2 mm bladed carbon spokes, 20 front and 24 rear because of the moulded spoke hole design. Again, no stiffness issues whatsoever.

I've actually lent those wheels to a friend who used to be a national masters champion. He's a seriously strong rider and is building a lightweight bike, so I'm interested to hear what he thinks of them.

I liked those DFS wheels so much that I went out and bought their 60 mm version myself. They're around 1,052 g, again with 3.2 mm bladed carbon spokes. I've ridden those a little as well, and they've been absolutely fine.

I've also been riding another set from Blade X on and off for a few months, using 3.1 mm carbon spokes with regular nipples. I haven't posted much about those yet, but again, no issues.

I've been riding carbon spoke wheels for probably seven years now. I originally switched after owning a set of Zipp 454 NSW wheels with steel spokes. I was heavier back then, and I found those wheels felt like absolute noodles. Moving to carbon spokes was a bit of a game changer for me.

Of course, things have changed considerably since then. Back then I was riding narrow rims with 23 mm tyres at around 100 psi. Now I'm riding 25 mm internal rims with 30–32 mm tyres at almost half that pressure.

One thing I normally do when testing wheels is check for any signs of rear wheel flex or rubbing under load. So far, I haven't noticed anything concerning with any of these sets.

I'm not saying there's no difference between 20 and 24 spokes, or between 3.2 and 4 mm spokes. There obviously can be, depending on the overall wheel construction. I'm just saying that personally, out on the road, I haven't experienced any problems.

Would I choose the 3.2 mm spokes if I ordered the VaporLite wheels again? Possibly. But for the sake of around 24 g, I'm quite happy with the 4 mm spokes.

I'll get some more miles on them and hopefully have a bit more to report, but so far I really can't fault them.

What is it you're looking for? You someting in mind?