Positive angled integrated handlebars.

[Dr J]

The product video shows rotating the top cap 90 degrees to tighten the headset

Where did you find the product video? Any information on how hard to tighten the bolts?

[thorbens]

Where did you find the product video? Any information on how hard to tighten the bolts?

It's available on their Ali product page. The first of their product pictures is a video showing how to assemble the headset components and cockpit. Unfortunately I couldn't find any torque spec but I suspect if one was to ask the seller they would provide this info or maybe it comes with printed assembly instructions?

[Dr J]

It's available on their Ali product page. The first of their product pictures is a video showing how to assemble the headset components and cockpit. Unfortunately I couldn't find any torque spec but I suspect if one was to ask the seller they would provide this info or maybe it comes with printed assembly instructions?

Thx; they replied to me already 5-6 nm for the fork lock bolt ( as they call it)

[Dark17]

Nice find.  I'm sure I've seen those upswept bars somewhere else but can't recall.

Any experience with Ornan stuff, it looks like they're an actual OEM factory.

Thanks!

Messaged them regarding the Integrated Bars and it's more expensive than your usual OEM bars but cheaper than XMCS, Farsports and the likes. I want to try them for my next project.

[Dareios]

Bumping this one, have there been any news from Onirii about an international release of that handlebar?

Something like the Simplon Pride II comes with an almost 600g heavy 2 piece stem + handlebar combo, but also fits every normal handlebar. Looking at the geometry another raiser handlebar would be a perfect fit and with the Onirii one you could knock a good 250g off the overall weight with this one.

[Pistonbroke]

Onirii have a bar that was recently released but not available internationally yet

Any update on these

[jfcb]

Tavelo should come in January with a 20mm rise cockpit according to Joe from PandaPodium.
I copied the some pics from the WeightWeenies forum below.
For me it will be the right amount of additional rise, but I will wait untill I see some real life measurements and reviews.

[poyo]

The Incolor Aerowav Integrated Handlebar has a 20mm rise.

[Dareios]

Any update on these

Onirii told me this:
"This model requires custom spacers (for certain frame models), which is quite troublesome. Therefore, we are not considering overseas sales at this time."
I was mainly asking because that would knock almost 300g of a 2nd hand Simplon Pride (compatible with normal FSA stems). When asking about Costum spacers and potential compatability they actually posted a picture of the Velobuild VB-R-368 Aerotrace, so now I'm asking them if it would be compatible with that frame, long and high stack to the max!

[Pistonbroke]

Onirii told me this:
"This model requires custom spacers (for certain frame models), which is quite troublesome. Therefore, we are not considering overseas sales at this time."
I was mainly asking because that would knock almost 300g of a 2nd hand Simplon Pride (compatible with normal FSA stems). When asking about Costum spacers and potential compatability they actually posted a picture of the Velobuild VB-R-368 Aerotrace, so now I'm asking them if it would be compatible with that frame, long and high stack to the max!

Have you got a photo you can post for the 368  please.

[Dareios]

Have you got a photo you can post for the 368  please.

No, when i asked about it potentially fitting the Simplon Pride 2 that can fit every conventional FSA handlebar and mentioned the later fact they responded:
"I understand, friend. Can you give me a clear photo of this part in the picture so that I can better confirm it for you"

This got me thinking and now I'm asking them if it's compatible with this bike, didn't get any response until now

[Chrisf10]

That Onan cockpit looks a lot like the Light Carbon HBR17

[Dareios]

Have you got a photo you can post for the 368  please.

Onirii now told me that they need to see a picture of the headset to confirm if it is compatible. If you're interested, contact them on Aliexpress and send them a pic of you Aerotrace/it's headset.

[bichler.bua]

End of November / beginning of December Onirii told me via AliExpress that they are selling the HB02 as universal lift handlebar.
Price incl. shipping was mentioned as 230 US$ and the option of customized additional spacers (printed?) for 15 US$.
I would suggest to contact them via AliExpress to discus for the HB02.

I have ordered and will test the Ullicyc T4 Ultra with the rise at the hoods - let's see...

[Fish #6]

Messaged them regarding the Integrated Bars and it's more expensive than your usual OEM bars but cheaper than XMCS, Farsports and the likes. I want to try them for my next project.

I like the look of these too. Did you go ahead, and if so, what was the price - approximately - and were the weight and geometry as advertised?