Mondince new 2026 Aero Gravel

[v0llhirsch]

Anyone got an advice for a fitting frame bag?

Full length?
My specialized 3l bag fits very well into my medium frame
https://www.specialized.com/de/de/specializedfj%C3%A4llr%C3%A4ven-frame-bag/p/220880?color=362061-220880

[Unsworn5836]

Full length?
My specialized 3l bag fits very well into my medium frame
https://www.specialized.com/de/de/specializedfj%C3%A4llr%C3%A4ven-frame-bag/p/220880?color=362061-220880

Ah yes, but hard to find. The L bag should fit nicely in an L frame.
Got a Pro gravel frame bag, but it is too short to fit in the front triangle or straps in the back is to short.

[n1825]

Got mine built.
What a lovely bike, seriously impressed

Set up for road with a pair of Mondince fm066 forks and 35mm gp5k on the back.
Comfortable and fast, highly recommended.
Still playing with bars and stem so currently unfinished, but you get the idea.

Still waiting on my frame, what do you think the max chainring is on 1x and 2x? Also is that a different fork to what they had for the frame originally?

[Pistonbroke]

I think chainrings have been covered previously in the thread... I'm not a watt monster so don't run large rings.
Yes, the fork is from a Mondince road bike with 35mm clearance.
Gotta say it again, the bike is absolutely wonderful!

[Pistonbroke]

Yup, BB drop is 93 or 94mm by design
Fork is Mondince fm066
I'm using it for road not gravel as was looking for long, low and steep seat angle. This nails it for me.

[Da11as]

So now as it seems this will be the only frame with progressive geometry in a foreseeable future I don't see any reason to hesitate on ordering FM316. Does anyone tried to mount Thunder Burts on a widish rim (32 IW)? I've seen the picture of the pink FM316 (looks sick! I also want acid pink bike!) bike with TBs on Zipps, but would it still fit into the rear with reasonable clearance (3-4 mm)?

I might need to try a shorter stem. Mine is definitely too long for this frame (I use 120 but should probably be on 100mm) and I actually use a positive offset on my seatpost to compensate. I really like the position though.
I don't quite understand how shorter stem would reduce wheel flop or calm the steering down. I my head it will do the opposite as the steering will feel much quicker with a shorter stem

Did you try to swap the stem already? I've been deciding between short and long fork and want to retain long and tall aero position without compromising handling off road (with 120 stem) and 420 fork seems like a good idea, but after your comment I am a bit hesitant.

[sclnd]

Frame is out of the paint shop, Jack sent me a video earlier. Quite happy how it turned out.

[uplined]

Been a long time lurker on this topic.. Here goes my build. Ridden with it for a few months now, pretty happy with it!

[SvenR]

Anyone got specs or pics of the axle heads required for the fm326? I have the dimensions.
Specifically, I am trying to see whether they are conical or flat?
Waiting for my frame to arrive and wanting to use DT Swiss Plug-in thru axles.

[v0llhirsch]

Anyone got specs or pics of the axle heads required for the fm326? I have the dimensions.
Specifically, I am trying to see whether they are conical or flat?
Waiting for my frame to arrive and wanting to use DT Swiss Plug-in thru axles.

It is flat

[SvenR]

Thank you very @v0llhirsch !

[kb_79]

Hi everyone, i'm currently in discussion with Jack from Mondince for the aero gravel frame FM316. After a bit of negotiating, he sent me a proforma invoice for 800 € flat, all-inclusive (shipping to France included).
Here is the detailed breakdown of the package:

Frameset : FM316 Frame + Fork (Size XS)
Cockpit : 400x90mm integrated carbon handlebar/stem
Accessories : Carbon seatpost, thru-axles, and headset
Paint : Custom "Crystal/Ice FX" Glossy finish (Pantone 874C - Copper/Gold marbling effect)
Shipping : DPD/XDB to France included.
Sizing & Fit Question:
I am currently leaning towards the Size XS with the 400x90mm cockpit, but I want to make sure I am making the right call. Here are my measurements:
Height: 170 cm
Inseam: 78 cm
Wingspan: 158 cm
Given my shorter wingspan, I am terrified of being too stretched out on a gravel bike. Do you think the XS is the perfect fit to keep a balanced position, or should I consider a different setup?
Also, how does the 800 € total sound for a custom paint + integrated cockpit deal? Is it a fair price or on the higher side for direct-to-consumer Chinese framesets?

Thanks for your help!

[v0llhirsch]

Hi everyone, i'm currently in discussion with Jack from Mondince for the aero gravel frame FM316. After a bit of negotiating, he sent me a proforma invoice for 800 € flat, all-inclusive (shipping to France included).
Here is the detailed breakdown of the package:

Frameset : FM316 Frame + Fork (Size XS)
Cockpit : 400x90mm integrated carbon handlebar/stem
Accessories : Carbon seatpost, thru-axles, and headset
Paint : Custom "Crystal/Ice FX" Glossy finish (Pantone 874C - Copper/Gold marbling effect)
Shipping : DPD/XDB to France included.
Sizing & Fit Question:
I am currently leaning towards the Size XS with the 400x90mm cockpit, but I want to make sure I am making the right call. Here are my measurements:
Height: 170 cm
Inseam: 78 cm
Wingspan: 158 cm
Given my shorter wingspan, I am terrified of being too stretched out on a gravel bike. Do you think the XS is the perfect fit to keep a balanced position, or should I consider a different setup?
Also, how does the 800 € total sound for a custom paint + integrated cockpit deal? Is it a fair price or on the higher side for direct-to-consumer Chinese framesets?

Thanks for your help!

I would say from a quality perspective, I could not be happier with the bike. Especially when I compare it to 2000+€ frames that would not have been custom painting included. Cockpit included sounds for me like a good price.

FWIW:
With your size, Mondraker would put you on a M frame ( https://mondraker.com/de/de/arid-carbon-rr-sl1752831894 ) which is a S frame for a Mondince. Are you sure you need XS?
In this thread are some links to bike insights and other pages where you can compare the sizing.
The bike is intended for a short stem (size S has 60mm at Mondraker), so with 90mm you are already going long.
Just mind the potential impact when you go too small (toe overlap on the front wheel, running out of seatpost etc,)

[kb_79]

Thanks for the heads-up on the Mondraker "Forward Geo" design! I completely missed that, but it makes total sense now.
The main reason I originally leaned toward the XS is my proportions: I'm 170cm with a 78cm inseam, but my wingspan is only 158cm. Having a short torso and short arms, my absolute biggest fear is being way too stretched out on drop bars.
But you're spot on—slapping a 90mm stem on a long-reach frame completely ruins the whole point of that geometry. Plus, dealing with toe-overlap on an XS on tight trails would drive me crazy.
If I follow your advice and step up to a Size S to get decent seatpost extension and front-wheel clearance, but stay with Mondince's 90mm integrated cockpit, the total reach is going to be way too long for my short arms.
Should I just ditch Mondince's integrated bar altogether, order the Size S frame, and source a separate 60mm or 70mm stem + gravel bars on my own? Or is this specific frame geo just a bad match for someone with my build?
Would love to get your take on this sizing puzzle. Cheers!

[v0llhirsch]

Thanks for the heads-up on the Mondraker "Forward Geo" design! I completely missed that, but it makes total sense now.
The main reason I originally leaned toward the XS is my proportions: I'm 170cm with a 78cm inseam, but my wingspan is only 158cm. Having a short torso and short arms, my absolute biggest fear is being way too stretched out on drop bars.
But you're spot on—slapping a 90mm stem on a long-reach frame completely ruins the whole point of that geometry. Plus, dealing with toe-overlap on an XS on tight trails would drive me crazy.
If I follow your advice and step up to a Size S to get decent seatpost extension and front-wheel clearance, but stay with Mondince's 90mm integrated cockpit, the total reach is going to be way too long for my short arms.
Should I just ditch Mondince's integrated bar altogether, order the Size S frame, and source a separate 60mm or 70mm stem + gravel bars on my own? Or is this specific frame geo just a bad match for someone with my build?
Would love to get your take on this sizing puzzle. Cheers!

Well, I am about 180cm with 88 cm inseam, so my upper body is shorter as well. I run a M frame in Mondince dimensions, M/L for a Mondraker.
I have a non integrated cockpit as I was skeptical about the reach as well and wanted to adjust the bike to my needs without a lot of hassle. Just keep in mind, that the seatpost angle is very upright and brings you forward a lot.
I am running a 70mm stem with a short reach handlebar (70mm, similar to a PRO PLT Ergo 31,8 mm).
For me, an integrated cockpit is a nice thing if you have certainty about your fit. If unsure, I would go with a classic setup - you can always buy an integrated cockpit later on when you found your optimal setup.