Quick Pro ER:One

[Hendie]

Does anyone know if there is a separate seat clamp for oval rails?

[alfiomotrambo]

About 200 km now on the bike. It was very windy today but no issues with the wheelset
I also changed the regular Red derailleur against the XPLR.

GG nice bike 

[Uberflo]

Does anyone know if there is a separate seat clamp for oval rails?

No, not necessary

[tovu]

About 200 km now on the bike. It was very windy today but no issues with the wheelset
I also changed the regular Red derailleur against the XPLR.

What a clean setup 😮‍💨 thanks for the feedback, will pull the trigger on the 78s

[alberino]

CUSTOM COLOR INFO QUICKPRO ER ONE
Has anyone customized their frame? I'm torn between these four colors and would love to see them 'in real life.' If you have one, could you please post a photo? Thanks

[PierreWxP]

CUSTOM COLOR INFO QUICKPRO ER ONE
Has anyone customized their frame? I'm torn between these four colors and would love to see them 'in real life.' If you have one, could you please post a photo? Thanks

First time poster here, but have been watching these forums and this topic in particular.
I got a quick pro er one, size L, bought from US site with handlebar and ultegra di2.

In custom color cp06, so i can attest that: the back end is just clear coat and look nice, it will be the same for the options you mentioned. The front end i have cracked ice effect over red, again looking superb. That green one would be my favorite.

[alberino]

First time poster here, but have been watching these forums and this topic in particular.
I got a quick pro er one, size L, bought from US site with handlebar and ultegra di2.

In custom color cp06, so i can attest that: the back end is just clear coat and look nice, it will be the same for the options you mentioned. The front end i have cracked ice effect over red, again looking superb. That green one would be my favorite.

Hi, thanks for the feedback.
Yours is very nice too.
However, the green one on the website doesn't look like the back is completely black, just the bottom.
However, yours and the other black and white ones all have the back of the seat post completely black.
I was also trying to figure out if anyone had that green color to post.

[Uberflo]

I do not have any issues with the cable routing. That was very easy.

[hubba]

Can anyone tell what kind of saddle setback I can achieve on the xxl frame with 82cm saddle height?
The seat tube is slack at 73 degrees but it gets steeper at the seatpost so it should be a bit steeper than the number suggests?

I need about 7-8cm of setback with straight 73 seat tube I'm on the limit of having too much setback saddle slammed forward with a zero offset post.

I asked pandapodium but they just said it's 73 degrees. Is there any cheaper places to order to europe than pandapodium?

[Sander2177]

Can anyone tell what kind of saddle setback I can achieve on the xxl frame with 82cm saddle height?
The seat tube is slack at 73 degrees but it gets steeper at the seatpost so it should be a bit steeper than the number suggests?

I need about 7-8cm of setback with straight 73 seat tube I'm on the limit of having too much setback saddle slammed forward with a zero offset post.

I asked pandapodium but they just said it's 73 degrees. Is there any cheaper places to order to europe than pandapodium?

I ordered my frame & bars from Ruben Bike a dealer in Portugal. He will look after you if contact him. I live in the UK had tax free shipping etc.
I did actual sell the bars to buy a set of the new crop of riser bars that are being released which help with the low stack heights of this frame.
https://underdogscycling.cc/product/incolor-aerowav-integrated-handlebar/
https://underdogscycling.cc/product/tavelo-avro-rise-handlebar/
I would consider a set of these over the supplied bars myself
Has a small LBS. No website can look at his Facebook page. Also sell Farsports, Tavelo ETC
https://www.facebook.com/groups/975602387895509/user/61571952723885
Ruben +351 926 723 624
DM if you want and I can send you my number have a load more photos of my bike

[Sander2177]

I ordered my frame & bars from Ruben Bike a dealer in Portugal. He will look after you if contact him. I live in the UK had tax free shipping etc.
I did actual sell the bars to buy a set of the new crop of riser bars that are being released which help with the low stack heights of this frame.
https://underdogscycling.cc/product/incolor-aerowav-integrated-handlebar/
https://underdogscycling.cc/product/tavelo-avro-rise-handlebar/
I would consider a set of these over the supplied bars myself
Has a small LBS. No website can look at his Facebook page. Also sell Farsports, Tavelo ETC
https://www.facebook.com/groups/975602387895509/user/61571952723885
Ruben +351 926 723 624
DM if you want and I can send you my number have a load more photos of my bike

[alberino]

Has anyone fitted this bottom bracket with steel bearings to their Quick Pro Er One? How does it go? Are there any good alternatives?

[jfcb]

Has anyone fitted this bottom bracket with steel bearings to their Quick Pro Er One? How does it go? Are there any good alternatives?

Not on a quickpro, but I'm a big fan of those Bikone bottom brackets for DUB T47. They are one of the only BB manufactures who uses a larger diameter outer shell allowing bigger ball bearings. In normal T47 BB's for dub (29mm), often very thin bearings are used which is not only more drag, but also causing faster wear. 
No need to buy ceramic bearings. Steel ball bearings are better for the longevity of the bearing race (since same material hardness).

[Uberflo]

I currently use the Novaride BB. No issues so far.

[alberino]

I currently use the Novaride BB. No issues so far.

too expensive for me