Author Topic: Mondince FM336  (Read 264236 times)


Igital96

Re: Mondince FM336
« Reply #196 on: May 04, 2026, 06:59:47 AM »
Hello guys I am ordering the frame.
And all the pieces for my build.

For the crankset I am going with sram red.

Should I go sram red classic or sram red wide?

I rather have the thinnest q factor but so the frame fit the classic?

Thanks

You can do both to be honest. Should not be a problem afaik. I ran the dub wide because there was only stock available with this interface. The SRAM Rival and Force are selling like candy. Crazy!

MF_one

Re: Mondince FM336
« Reply #197 on: May 05, 2026, 05:29:21 PM »
Since I am getting the frameset soon, I am still planning which tyres to mount.

Here below my options:
Continental Terra Hardpack 50-622
Continental Terra Competition Race Rapid TR 45-622
Hutchinson Caracal Race 45-622
Vittoria Terreno Hardpack 45-622 or Vittoria Terreno Dry 47-622

For the wheelset I am planning:
Rim Inner Width: 30mm
Rim outer Width: 36mm
Rim depth: 45mm

So whatever I would mount it will over at around 47-48mm the minimum.
Any experience or recommendation to that?

Chromikson

Re: Mondince FM336
« Reply #198 on: May 06, 2026, 04:30:56 AM »
I contacted Mondince. They know about the problem with threading the brake hose. The problem was due to too much glue.

Rolle2k

Re: Mondince FM336
« Reply #199 on: May 06, 2026, 06:13:06 AM »
Since I am getting the frameset soon, I am still planning which tyres to mount.

Here below my options:
Continental Terra Hardpack 50-622
Continental Terra Competition Race Rapid TR 45-622
Hutchinson Caracal Race 45-622
Vittoria Terreno Hardpack 45-622 or Vittoria Terreno Dry 47-622

For the wheelset I am planning:
Rim Inner Width: 30mm
Rim outer Width: 36mm
Rim depth: 45mm

So whatever I would mount it will over at around 47-48mm the minimum.
Any experience or recommendation to that?

Caracal race 45mm is actually ~47mm on 24-25mm IW rims... on my 32mm IW rims they measure slightly above 50mm... so on IW 30mm wheels they will probably measure just below 50mm.

MF_one

Re: Mondince FM336
« Reply #200 on: May 06, 2026, 10:05:07 AM »
Caracal race 45mm is actually ~47mm on 24-25mm IW rims... on my 32mm IW rims they measure slightly above 50mm... so on IW 30mm wheels they will probably measure just below 50mm.

Thanks for the feedback.
Then based on that it is much better that I go for a 45mm to reach 48/49mm, than to go for 47mm and overpass 50mm that can become an issue due to tyre clearance.

Igital96

Re: Mondince FM336
« Reply #201 on: May 07, 2026, 06:49:31 AM »
Thanks for the feedback.
Then based on that it is much better that I go for a 45mm to reach 48/49mm, than to go for 47mm and overpass 50mm that can become an issue due to tyre clearance.

In my FM336 I have 50mm front / 45 mm rear (G-ONE RS). I have 30mm IW wheels. The 45mm measures 47-48mm and the 50mm around 52.

MF_one

Re: Mondince FM336
« Reply #202 on: May 07, 2026, 05:04:59 PM »
In my FM336 I have 50mm front / 45 mm rear (G-ONE RS). I have 30mm IW wheels. The 45mm measures 47-48mm and the 50mm around 52.

so that means you are running a 52mm real width tyre in FM336? Is it not to tight?

Spongel

Re: Mondince FM336
« Reply #203 on: May 08, 2026, 07:25:34 AM »
Alright I will step in this Thread now. :)

I am also very interested in this frame and have E-Mail contact to Jack asking some questions etc.

One major Issue is the Size which I have to decide.

My current bike is a Stevens Gavere in Size 58 (choose 2022 Model in bikeinsights for correct geo). Its a very relaxed, comfortable pure adventure gravel bike. BUT I mostly ride in the city, asphalt roads, bike roads, sometimes light gravel but rarely really hard single trails. I enjoy speeding, doing kilometers after work to relax myself. But I also enjoy riding wood trails with some roots, stones etc. My riding profile is more like 70% asphalt/bike roads, 20% light gravel, 10% single trails/hard gravel tracks.

I am 185cm tall, 93-95kg bodyweight. Did a lot of extra measurements. Inseam is about 88-90cm; Torso-Length 64cm, Arm-span 182,5cm (yes negative Ape Index lol).
So I am basically tall with long legs, but not so long arms and "normal" torso. This is where it gets complicated. Jack says: Choose L. AI says choose XL because XL has only 5mm more Reach than L but it got 24mm more stack. This reduces the risk, that I have to work with of spacers, high stem or weird cockpit compensatiion later.

My current setup would be:
- Elitewheels 700C 38mm depth 32,5mm outer width carbon wheelset (https://de.aliexpress.com/item/1005004574763198.html)
- schwalbe G-One RS Performance tires in 45mm
- Mondince FM336 Frameset
- 6° 90mm Stem carbon (https://de.aliexpress.com/item/1005006017540894.html)
- RXL SL Handlebar (78mm Reach, 110mm Drop; 15° Flare; lower width 458mm, upper width 380mm (https://de.aliexpress.com/item/1005003691497580.html)
- Shimano Center Lock Discs RT-CL800 160mm (yes I need an adapter. Jack confirmed that adapter will work )
- Ryet Saddle (https://de.aliexpress.com/item/1005005209973776.html)
- 300mm carbon seatpost
- other parts like, cranks, groupset are not yet ordered


Thats a lot of information I know. I am just looking for the beste compromise frame for my body and my riding style

Any input on my information? looking forward to your replies


choan

Re: Mondince FM336
« Reply #204 on: May 08, 2026, 07:31:07 AM »
I will go for L also, more seatpost out = more flex and confort, you can have some spacer and as you get more fit and more flexible you will slam the stem and be faaast and sexy

Chiyou

Re: Mondince FM336
« Reply #205 on: May 08, 2026, 08:16:50 AM »
Looking at BikeInsights, the Mondince XL frame is slightly smaller than the Gavere one while the L frame is substantially smaller than the Gavere. If the Gavere works well for you, I'd go with size XL for the Mondince.

https://bikeinsights.com/compare?geometries=622f5a0e4fad47001d40c191,69be1e96e0c59c001b08ac87

I am not sure how to interpret the 'BUT' in your post - are you hoping to adopt a more aggressive riding position?

One small observation: a 300mm seatpost may not be long enough (also, Mondince's website says that a seatpost (of unspecified length) is included with the frame).

Spongel

Re: Mondince FM336
« Reply #206 on: May 08, 2026, 08:32:50 AM »
Looking at BikeInsights, the Mondince XL frame is slightly smaller than the Gavere one while the L frame is substantially smaller than the Gavere. If the Gavere works well for you, I'd go with size XL for the Mondince.

https://bikeinsights.com/compare?geometries=622f5a0e4fad47001d40c191,69be1e96e0c59c001b08ac87

I am not sure how to interpret the 'BUT' in your post - are you hoping to adopt a more aggressive riding position?

One small observation: a 300mm seatpost may not be long enough (also, Mondince's website says that a seatpost (of unspecified length) is included with the frame).

The Gavere in general works for me, yes. When I see the bikeinsights diagram I just think "is even the XL too small for me?" But maybe this is caused by lack of experience because the Gavere is my first gravel bike. I even have to say its my first bike where I spent more money. In the past Ive ridden cheap, used vintage peugeot bikes. But these bikes were just for being mobile and not for doing ride-outs and doing sport. Now I enjoy doing sport on my bike, doing ride-outs. Its more than just being mobile in the city and around.

The "BUT" was related to my actual riding style and what the gavere was designed for. I think its not a perfect fit (anymore). I am definitely not a frequent bikepacker and adventure graveler. Yes, I do bikepacking and adventure graveling but rarely. Long story short. I dont want to lose the ability to do graveling but I want a bit sportier more for street/asphalt/road designed frame.

seatpost: yes you are right. But thats not a big deal. I can use the seatpost for my girls bike. My current seatpost on the Gavere is 350mm long, and most of it is buried in the frame. But that’s just because the frame itself is larger—when I bought that seatpost, the FM336 wasn't even on my radar yet. Thats why i chose 300mm.

Igital96

Re: Mondince FM336
« Reply #207 on: May 08, 2026, 11:00:36 AM »
More pictures of my Purple Pearl FM336 just in case someone wanted.

AltecasLT

Re: Mondince FM336
« Reply #208 on: May 08, 2026, 12:38:22 PM »
More pictures of my Purple Pearl FM336 just in case someone wanted.
Nice build. What size rotors are you running?
« Last Edit: May 08, 2026, 02:18:53 PM by AltecasLT »

pogz

Re: Mondince FM336
« Reply #209 on: May 08, 2026, 01:43:16 PM »
I contacted Mondince. They know about the problem with threading the brake hose. The problem was due to too much glue.

And because of that they paused sending my frame heh... Waiting for info from Jack