Mondince FM336

Started by Zrader, March 08, 2026, 10:01:30 PM

Previous topic - Next topic

clayp

Quote from: ElB on September 19, 2026, 01:29:16 AM
I have built a fm316 and the standard compression ring coming with the deda superbox v2 stem is too high. Do you happen to have the dimensions of your fm336 original compression ring? I attach pictures of the stem installed as well as of the compression ring (fm316).
I realise this is a bit late, so I don't know if this is still relevant to you, but Deda sells compression rings in different thicknesses (bit pricy for what they are) https://dedaelementi.com/alanera-rs-compression-ring

ElB

Quote from: clayp on October 07, 2026, 11:52:23 PM
I realise this is a bit late, so I don't know if this is still relevant to you, but Deda sells compression rings in different thicknesses (bit pricy for what they are) https://dedaelementi.com/alanera-rs-compression-ring
Thanks you! I already bought the compression ring, in my case I had to go for the "bottecchia emme 4"

loisvigo

Quote from: ElB on September 19, 2026, 01:29:16 AMI have built a fm316 and the standard compression ring coming with the deda superbox v2 stem is too high. Do you happen to have the dimensions of your fm336 original compression ring? I attach pictures of the stem installed as well as of the compression ring (fm316).




Sorry for my late reply

Deda sent me ring with 6,8 mm instead 9mm original is like yours and in my case I need 6.8

loisvigo

Here my pin-pon email with Deda

CarlosL

#499
Hola!!

Os dejo fotos de como me ha quedado el FM336 montado y el detalle del montaje, por si os sirve de ayuda:

Cuadro    Mondince FM336
Ruedas CSC    Ancho interno 32
Grupo    LTWOO EGR 2ª gen 1*13
Manillar    Balugoe gravel
Bielas y potenciómetro    Thinkrider de aluminio PP5
Pedalier    ZTTO T47 24mm
Plato    Wuzei 42 T
Casete    Goldix 13v 11-50
Sillín    Kocevlo
Neumático delantero    Tufo Swanpero 700*48 TR HD
Neumático trasero    Tufo Thundero 700*44
Discos    Zrace 160mm centerlock

james7

Has anyone built one of these with mechanical shifting? 

Lotnik

Yes, mine is on 105/GRX mechanical setup.

fadenek

Quote from: james7 on November 18, 2026, 10:10:45 PMHas anyone built one of these with mechanical shifting? 
I've built FM316 with GRX 820 and it was quite straightforward, the situation shouldn't be much different in case of FM336

pjvdb

Hi all, following this thread with great interest as I have also just ordered an FM336!

I'm thinking of mounting it with a 105 di2 (34/50) groupset (+ geoid pm500 power meter) as there are some good deals out there. But I'm wondering if this will be doable with regards to clearance for the chainrings, and I'm also wondering how much the front derailleur will impact tire clearance?

Thanks for any info!