Lightcarbon LCR72 "aero racing gravel"

Started by zealot128, April 24, 2026, 06:42:07 AM

Previous topic - Next topic

ChocoLateBN

Quote from: bicycie on November 11, 2026, 06:47:04 PMJust received the size M frame in matt black yesterday. Shipping started on October 30th, and it arrived in Canada on November 10th via UPS. I paid an additional $30 USD in duties and taxes.

The frame arrived in a well packaged box, with every part of the frame individually wrapped in foam for protection. Some parts were wrapped in many layers of foam for extra protection. Overall, matt black finish and build quality are acceptable. See attached pictures for reference.

One thing worth mentioning is that the HBR18 has a flattened section along the drops for improved ergonomics. This detail wasn't evident in the catalogue photos.

The headset bearings seat nicely and firmly in the head tube, and the bottom bracket threads smoothly into the BB shell by hand. No facing or thread chasing was required.

weight: frame 1202g, fork 489g, seatpost 203g, handlebar 320g, total=2214g.

Unfortunately, the build is going to be delayed because the T47 threaded bottom bracket included with the frame shipment appears to be defective. Both BB cups will thread into the drive side, but neither will properly engage the threads on the nondrive side. This not is a Lightcarbon issue, as the bottom bracket itself is manufactured by Gineyea. I'll be following up with Lightcarbon to see if I can get a refund or replacement. The irony is that one of the reasons I ordered the bottom bracket directly from Lightcarbon was to avoid potentially ordering the wrong standard.

Thanks for your images! Are you able to take a picture of the front of the head tube/steer tube and possible, let me know wide it is? I'm going to be adding in a custom decal there.

Also, it's unfortunate your bottom bracket was faulty. What will you be going with? And what drivetrain are you going to use?

bicycie

Quote from: kvnp on November 11, 2026, 09:35:17 PMHey,

Do you think you can provide the seatpost measures like the width and the length of the seatpost base. I want to check if a Seka seatpost can fit the frame.

Thank you :)

The seatpost dimensions are 40mm in length by 25mm at the widest part of the teardrop. Please see the attached photos (my digital caliper ran out of battery). I hope this helps.

bicycie

Quote from: ChocoLateBN on November 12, 2026, 03:11:32 AMThanks for your images! Are you able to take a picture of the front of the head tube/steer tube and possible, let me know wide it is? I'm going to be adding in a custom decal there.

Also, it's unfortunate your bottom bracket was faulty. What will you be going with? And what drivetrain are you going to use?

Of course! See pictures for the head tube and measurement.

I just ordered the same Gineyea steel bearing bottom bracket off of Aliexpress. Hopefully I get a functional one this time. I will be using an Ultegra crank with Ltwoo EGR groupset. How will you be building yours up?

ChocoLateBN

#228
Quote from: bicycie on November 12, 2026, 11:41:12 PMOf course! See pictures for the head tube and measurement.

I just ordered the same Gineyea steel bearing bottom bracket off of Aliexpress. Hopefully I get a functional one this time. I will be using an Ultegra crank with Ltwoo EGR groupset. How will you be building yours up?

That was extremely detailed, thank you for the picture!

I'll be using 2x Ultegra Chainrings and am looking to get a Magene P515 power meter with their carbon TEO cranks. I asked for the DUB bottom bracket but have thought about going for a Wolftooth one for a little bling, but that'd be another expense. I'll probably stick with the provided one and replace in the future. The build is getting a quite expensive already for me 😂

I have purchased two wheelsets, one for road and another for gravel from Serenade. I'll probably be 80-90% on road unless I go with specific friends.

I'm a big guy, about 100kg/220lbs so I'm going for maximum comfort with wide internal rim wheels and wider tires. Road has 25mm internal (plan to run 35mm GP 5000S if I can buy/find them, 32s if I can't) and Gravel has 30mm internal. A little sad I would have to effectively use 40mm gravel tires since they'll blow up significantly to ~43mm. Hopefully clearance with a FD/2x setup is more forgiving so I can go to 45s so I look forward to everyone's builds as I wait for mine.

kvnp

Quote from: bicycie on November 12, 2026, 10:55:10 PMThe seatpost dimensions are 40mm in length by 25mm at the widest part of the teardrop. Please see the attached photos (my digital caliper ran out of battery). I hope this helps.

Awesome thank you so much ! So far, how is the build going ?

Samuel BMR

Quote from: kvnp on November 14, 2026, 05:15:43 AMAwesome thank you so much ! So far, how is the build going ?

Yes we want to know! Also IF POSSIBLE real max WAM tire clearance ! 🙏🏼
I have & ride 23 bikes
Also I ride a lot, like a lot lot

kbernstein

While you are there are you able to take rough measurements of the downtube hatch? Opening dimensions and an estimate of how far up and dimensions of the storage itself. I'd like to know if my minipump fits or if i need to buy a new one during the sale. Mine was supposed to be here already but it's not even been painted yet  :'(

bicycie

Quote from: kvnp on November 14, 2026, 05:15:43 AMAwesome thank you so much ! So far, how is the build going ?


The build went very smoothly. I did not require any cable routing tools to complete the internal wiring. Routing the rear brake hose was straightforward, as I was able to guide it through the frame using the downtube storage opening. Running the brake hoses through the handlebar was also trouble free. No facing, sanding, or other DIY work was required.

Side note: It has been three days, and I still have not received a response from LightCarbon regarding my T47 BB shell issue.

bicycie

Quote from: kbernstein on <strong>Today</strong> at 02:45:29 AMWhile you are there are you able to take rough measurements of the downtube hatch? Opening dimensions and an estimate of how far up and dimensions of the storage itself. I'd like to know if my minipump fits or if i need to buy a new one during the sale. Mine was supposed to be here already but it's not even been painted yet  :'(

Aww man, sorry to hear that. Communication and keeping us updated are definitely not their strong suits. I hope everyone receives their frames soon.

By mini pump, do you mean an e-pump or a hand pump? For reference, I've tested both of these and how they fit inside the frame.

The downtube storage hatch measures 130 mm L × 38 mm W (images 1-3).

The downtube storage pouch is approximately 240 mm L × 70 mm H. You have to be strategic about how you store things inside the pouch. If an item is too wide or too tall, the pouch won't slide in properly.

In this example, I have a tire lever, a tubeless tire repair kit, and a hand pump measuring 180 mm L × 43 mm W. These fit inside the pouch and were able to slide into the storage compartment. However, adding any other items, such as a butyl tube or a set of Allen keys, made it impossible to slide the pouch into the frame. (image 4)

My electric pump measures 80 mm H × 46 mm L × 37 mm W, and it would not fit inside the pouch and then into the downtube. However, it did fit when placed directly into the downtube without the pouch.

There is actually quite a bit of space both above and below the pouch. As mentioned, the pouch is around 240 mm long, and it can slide almost all the way up or down inside the downtube. The pouch can be pushed approximately 200 mm downward before it is stopped by the bottom bracket, or it can be pushed and stored all the way up. Because of this, you can get pretty creative with how items are stored. (images 5-8)

In one of the photos, I've shown how the pouch can be pushed down, allowing an electric pump and a butyl tube to sit directly above it. In theory, you could even use a second pouch, with one pushed all the way down and the other all the way up, and store a smaller item between the two pouches (images 5-8).

Let me know if you have any other questions.

bicycie

Quote from: Samuel BMR on <strong>Today</strong> at 01:21:20 AMYes we want to know! Also IF POSSIBLE real max WAM tire clearance ! 🙏🏼

DISCLAIMER: Please take these measurements with a grain of salt. Do not make any decisions based solely on my measurements, as I am not an expert. If you believe my measurement method is inaccurate, please provide guidance or corrections.

For the total WAM, I placed tape on the frame at the point where it aligns horizontally with the widest part of the tire, then measured the distance between those points. Based on this method, the total WAM is approximately 62 mm in the rear and 72 mm in the front.

I also took photos showing allen keys inserted between the widest part of the tire and the frame to estimate the available clearance. The tires currently mounted are Specialized Pathfinder Pro 2Bliss Ready tires, which measure 46 mm wide. Below are the largest Allen keys that fit between the frame and a 46 mm tire (pictures attached for reference):
- Rear, non-drive side: 6 mm Allen key fit.
- Rear, drive side: 8 mm Allen key fit.
- Front, non-drive side: 10 mm Allen key fit, with a few millimeters of additional clearance remaining.
- Front, drive side: 10 mm Allen key fit, with a few millimeters of additional clearance remaining.

Curious to know if this is enough tire clearance for everyone.  ;D