Lightcarbon LCR72 "aero racing gravel"

Started by zealot128, April 24, 2026, 06:42:07 AM

Previous topic - Next topic

Samuel BMR

Quote from: asdrubal888 on November 18, 2026, 11:54:13 PMDid you guys ask for any custom paint jobs? Wonder if hold up is because of that and if I would get it faster if I just went for ud Matt finish...

Literally UD GLOSS FINISH. So the most basic
I have & ride 23 bikes
Also I ride a lot, like a lot lot

Gbodorr

#241
After a long wait, my frame has finally arrived!

I ordered the frame back in June, and after several delays, it was finally delivered on November 16. We wasted no time and got straight to unboxing and building it.

Frame specifications
- Size: M (54)
- Handlebar: HBR18 Gravel, 380x100 mm
- Paintjob: Original white/black split design, with LCB-01HS Chameleon on top and raw carbon finish on the lower section
- Gloss finish with black decals

Order timeline
- June 1, 2026: Pre-order placed and payment completed.
- June 24: Original estimated production time of 50–60 days.
- July 31: First significant delay. Raw frame approximately 25 days behind schedule, with painting another 20 days behind.
- August 26: Chainstay redesign introduced further delays. Raw frame expected by the end of September.
- September 17: Update from LightCarbon that everything was progressing normally.
- October 2: Raw frame expected around October 10.
- October 13: Painting estimated to take another two weeks, followed by 10–18 days of shipping.
- October 20: Another 10-day painting delay.
- November 3: Finally shipped from China.
- November 12: Arrived in Germany.
- November 16: Delivered to Croatia!

So, quite a bit longer than initially expected. But considering some of my mates are still waiting for their Orbea and Specialized orders, I guess it could have been worse!

Unboxing and frame quality
Packaging was good, and everything arrived safely.
The first impression was very positive. The internal carbon surfaces are spotless, and all the finishing details are nicely cleaned up. No rough edges or obvious imperfections inside the frame.
Overall, I'm very happy with the frame's finish quality.

Assembly
Assembly was straightforward, with no particular issues.

A few notes from the build:
- I ended up using a Gineyea T47 bottom bracket because my mechanic didn't have the tool for the SRAM DUB T47 BB.
- We had to cut approximately 8.5 cm off the seatpost.
- I'm not entirely sure whether the grippy section of the seatpost is positioned correctly relative to the upper part of the clamp. We used carbon assembly paste, and everything seems to be holding well so far. I'll keep an eye on it.
- The steerer was cut with room for two 1 cm spacers, although I might remove one in the future.

I'll share the complete build, component list, weight, cost and first riding impressions in a separate post.

For now, really happy to finally have this project together!

Gbodorr

#242
Following up on my previous post (because of photo attachment limit :P), unboxing and assembly, here's the completed build!

Frameset
- LightCarbon LCG072-D, size M (54) – 1,148g
- Carbon fork – 480g (cut)
- Seatpost (cut by 8.5 cm) – 175g
- HBR18 integrated handlebar, 380x100 mm – 313g
- Spacers – 21g
- Headset / compression parts – 74g
- Thru-axles – 57g
- UDH – 32g
- T47 bottom bracket – 112g
- Integrated downtube storage bag – 47g
- Downtube cover – 52g
- Titanium computer mount – 26g
- 2x BC11 bottle cages – 44g

Wheels & tyres
- Goosynn Ti-Fi MXG5450 Pro (30mm internal / 54/50mm depth / Ti-Fi spokes) – 1,337g
- Schwalbe G-One RS Pro 50-622, front – 605g
- Schwalbe G-One RS Pro 45-622, rear – 494g
- BBB CoreCap tubeless valves – 12g
- Sealant (2x 60 g) – 120g

Drivetrain
- SRAM Force D1 crankset with power meter, 172.5 mm – 649g
- Pass Quest 44T narrow-wide chainring – 91g
- SRAM Force D1 AXS shifters (pair) – 476g
- SRAM Force D1 rear derailleur + battery – 326g
- SRAM Force XPLR XG-1271 10-44 cassette – 380g
- SRAM Force E1 Flattop chain – 248g
- Gineyea T47 bottom bracket – 112g

Brakes
- SRAM Force D1 rear caliper + hose + pads – 177g
- SRAM Force D1 front caliper + hose + pads – 157g
- Ryet 160 mm Centerlock rotors + lockrings (pair) – 282g

Finishing kit
- Ryet RT06S saddle – 185g
- Shimano XTR PD-M9200 pedals – 320g
- Bucklos handlebar tape – 68g

First ride impressions
I managed to squeeze in a first test ride: 120 km on the road with some buddies riding their road bikes.

Honestly, I wasn't sure how the gravel bike would keep up. I was thinking I'd just turn around at some point if things got too hard, but it was flying!

Really happy with how the bike feels and performs so far.

I also took a short dirt path on the way home, but it's too early to say much about its gravel performance. I was running the tyres at 3 bar, so that's definitely not representative of how I'll ride it off-road.

Still need to do a proper gravel ride, especially one with some decent descents.

One thing I can already comment on is the 16° handlebar flare. It really makes a difference to the overall feeling of stability, particularly on descents. Looking forward to testing it properly on technical gravel terrain.

Weight & cost
- Total build weight: 8,7kg
- Total build cost: €3,800

I'll post more updates and photos after some proper gravel miles, including technical descents.

You can also follow along on Instagram: @potzo9.

So far, really happy with how everything turned out!

asdrubal888

Cool build. Why only 45c at the back? Any space there for sth bigger?

Gbodorr

Quote from: asdrubal888 on November 19, 2026, 10:34:42 AMCool build. Why only 45c at the back? Any space there for sth bigger?
There is room for probably 55.. but as I said, I need to have proper gravel ride to judge my tyre choice. I have one 50mm as reserve.

Something was rattling while going over bumps. It's the downtube cover. Good thing I had a box kit of various furniture flooring protection pieces, so I cut a thicker piece out of it and it's perfect now.

Konajra

Quote from: asdrubal888 on November 18, 2026, 11:54:13 PMDid you guys ask for any custom paint jobs? Wonder if hold up is because of that and if I would get it faster if I just went for ud Matt finish...

Yes I did, gloss white Chameleon, with a matte black inside front fork and custom decals.