Deciding on what wheel set depth to get

Started by Makenna, November 16, 2026, 02:07:54 PM

Previous topic - Next topic

Makenna

Hey! I'm new here, and I'm wondering what type of carbon wheelsets I should get. 50mm/50mm, 50mm/60mm, or 60mm/60mm are all things I've heard mixed comments about for different situations and I'm not sure what fits me. I'm 56.7kg, 160cm, and we normally don't get super intense wind conditions either.

{}-_-{}

Start with something. There is plenty of wheelsets that are EXTREMELY affordable and good quality now.
I would suggest the KORE cyclone 50mm to start with. See how you like it, whether its stable in the wind for you etc. At 50mm and 1200g this is very good value and something to get you going.

Makenna

Quote from: {}-_-{} on November 16, 2026, 02:29:26 PMStart with something. There is plenty of wheelsets that are EXTREMELY affordable and good quality now.
I would suggest the KORE cyclone 50mm to start with. See how you like it, whether its stable in the wind for you etc. At 50mm and 1200g this is very good value and something to get you going.
I looked at Kores, and they are likely out of my price range for the 1200g versions. Was suggested to use some alibaba wheelsets, looking at them they are cheaper / lighter, but I'm not sure how the after-sale support on a B2B site like Alibaba compares to something like Aliexpress. For 350-400 USD I found two wheelsets w ~1200g at 50mm/1260g 60mm and I'm likely going to try to buy those unless there is any problems with Alibaba.

I'm by no means a good rider, and just cycle for fun, so I don't want to spend too much to start with carbon wheelsets, although I do want to try to keep the weight of my bike down.

kubackje

Get those in 50mm
https://a.aliexpress.com/_EGjDThU

One of the best wheels money can buy. Great rim shape, lightweight, steel spokes. Certainly wouldn't recommend KORE for your first carbon wheels.

rovescio

Alibaba is cheaper because they don't consider tariffs. If you msg seller and ask for duty paid shipping it will likely end up being similar pricing to AliExpress. (most of the time they add ~50% of the item's price to the shipping fee)

Chiyou

If you have any riding buddies, see whether you can borrow a pair of wheels to see how you like them. You don't have to go for miles upon miles but, ideally, pick a gusty day to get an impression of what you're up against. You may need to adjust your brakes as rotors rarely line up across bikes.

Matter

I'd choose the rim depth based on your actual riding scenarios rather than just the numbers. As a general rule, deeper rims are better for flat roads and aero performance; if you climb more, something under 50mm is usually more suitable. That said, 50mm is a very good all-round compromise for most riders.

Also, since you're just starting out, I wouldn't recommend going for ultra-light products. Very light wheels/components often mean reduced durability, and as a beginner you'll benefit more from reliability and easy servicing than from saving the last few grams. Lightness isn't automatically bad, but I wouldn't prioritise it over durability at this stage.
TAGOOLA · Carbon Fiber Bike Components · Smooth Ride Smooth Vibe
[email protected] · WhatsApp +86 18050120423 · AliExpress

Da11as

Been riding for many years with anything ranging from 20 to 88mm deep rims, the wheels have evolved quite a lot recently and it is not anymore deeper=less stable or deeper=faster. Depending on your goal, use case (and budget) and weight distribution you can end up with a deep stable wheel as well as not so deep yet unstable wheel. If it's your first carbon wheel set, I wouldn't stress too much about this, you'll figure it out later.

I would start from a contemporary middleground, a 50/50 wheel, which will give you a ballpark of what you may want to have in the future. IMO, mullet (different wheel height) is generally ugly and 50+ wheels may make or break aesthetics of the drop bar bike.

Makenna

Quote from: Matter on November 16, 2026, 08:47:19 PMI'd choose the rim depth based on your actual riding scenarios rather than just the numbers. As a general rule, deeper rims are better for flat roads and aero performance; if you climb more, something under 50mm is usually more suitable. That said, 50mm is a very good all-round compromise for most riders.

Also, since you're just starting out, I wouldn't recommend going for ultra-light products. Very light wheels/components often mean reduced durability, and as a beginner you'll benefit more from reliability and easy servicing than from saving the last few grams. Lightness isn't automatically bad, but I wouldn't prioritise it over durability at this stage.

I am not so certain how I may be able to verify the quality or durability of a wheelsets, I've heard overall very mixed opinions regarding Chinese carbon components from great to having delaminated quickly or by the factory.

Makenna

Quote from: Da11as on <strong>Today</strong> at 01:31:52 AMBeen riding for many years with anything ranging from 20 to 88mm deep rims, the wheels have evolved quite a lot recently and it is not anymore deeper=less stable or deeper=faster. Depending on your goal, use case (and budget) and weight distribution you can end up with a deep stable wheel as well as not so deep yet unstable wheel. If it's your first carbon wheel set, I wouldn't stress too much about this, you'll figure it out later.

I would start from a contemporary middleground, a 50/50 wheel, which will give you a ballpark of what you may want to have in the future. IMO, mullet (different wheel height) is generally ugly and 50+ wheels may make or break aesthetics of the drop bar bike.
Haha, I haven't even thought much about the aesthetics that different wheel depths may have for a bike, but it seems in general 50/50 has been the recommended choice.