Johnny's CS057 build

[Roadie2mtb]

I also ordered some Stickers from Doityourselflettering.com, I'm hoping it turns out looking good!  Still trying to find time for visit to LBS, to get a full crown race, and maybe cut the fork (its flush with top). Probably have them install BB, I don't have the tool

[Roadie2mtb]

So I made it to LBS today got the headset installed, BB, and crank. Took him no more than 25 minutes, and cost me $65! Didn't know it cost so much! The manager said it was right amount. Could have bought the tools and installed myself for cheaper.  Well now I don't have enough $ for some new mtb shoes to go with my crank brothers. Oh well, guess I'll save up some more

[RS VR6]

Seems a bit high...but not out of the norm for larger shops.

[Roadie2mtb]

Seems a bit high...but not out of the norm for larger shops.

I'm thinking they charge for a hour at a time, no 30 min or 15 minute increments

[7]

That's not a crown race. It's the compression ring. Just google mountain bike headset. Look at the images.

[carbonazza]

That's not a crown race. It's the compression ring.

Thanks for educating us

[Roadie2mtb]

My build list.
Frame- CS057  UD custom paint 12x142   rear     1242g
Wheels - Light bicycle WM29C19  Novatec-  771sb/772sb hubs, Piller aero X-TRA 1420 spokes, and decal color to match.    Weight f685/r840 =1525g
Groupset-XT M8000-1x11
Crankset- XT + 32t chainring     701g

Cassette- 11-40t     410g

Derailleur- med cage       272g

Shifter- I spec II     138g

Chain- Shimano XT      264g

Bottom bracket- Shimano MT800      87g

Brakes- XT f/r with hoses and hardware       616g
Rotors- 180f + hardware      145g
160r + hardware      128g
Front rotor mount + hardware     35g

Shocks- RockShox recon gold tk     1791g

Headset- Neco       119g

Stem- Truvativ STYLO T20 60mm     130g

Spacers- No name alloy        10g

Handle bars- Seta 31.8X680 3K Glossy  132g

Grips- Lizard skins moab      108g

Seat post- Seta 31.8X400 3K Glossy     195g

Seat post clamp- No name alloy       26g

Seat- Toseek/No name 3K Matte     106g

Pedals- Crank brothers candy 1        280g
Flat Pedals for spares- Rock Bros magnesium, steel axle         223g

Bottle cages- Seta 3K Glossy     48g
Bottle cage bolts- No name, black alloy     4g

Tires- Schwalbe racing ralph performance -DC 2.25 f/r         1305g
Tubes- Schwalbe       415g
 
Axle- rear     79g
front     72g

Chainstay guard Sticker        weight?
Stickers     weight?
   
Total est weight of 10546g?  23.25lbs.  Plus there is some hardware in the weight that may not be used.
Wanted to keep it below 10k.    going tubeless might shave weight

[Roadie2mtb]

Should I be cutting my seatpost? It hits the cage bolts!

[Roadie2mtb]

My LB-Wheels shipping out this morning (posting )

[SportingGoods]

Fork, Shimano groupset + brakes are heavy. That's why you are not sub-10kg. Tubeless is a must as well, gain in weight and comfort.
But with such light wheels the bike should be pretty fast and dynamic despite the total weight.

[Roadie2mtb]

Fork, Shimano groupset + brakes are heavy. That's why you are not sub-10kg. Tubeless is a must as well, gain in weight and comfort.
But with such light wheels the bike should be pretty fast and dynamic despite the total weight.

Yeah it should ride great, might consider tubeless on next set of tires.

[Roadie2mtb]

Received the wheels yesterday! Have all the parts, just don't know when I'll get the bike built. I put the wheel weight in build list.

[RS VR6]

You can probably drop a good 200gr by going tubeless and another 75gr by going with some bolt through axles.

http://fairwheelbikes.com/far-and-near-15mm-thru-axle/

http://fairwheelbikes.com/far-and-near-12mm-thru-axle/

[Roadie2mtb]

Yeah I could see some weight savings there, thanks!

[Roadie2mtb]

After ending up buying some more tools, finished the build. Doing final adjustments, need a shock pump, plus waiting on some rim tape, have the Tubes in, but could pop with spoke holes.  Total weight 10.18kg.  Rides great!!  Fast!  Pic coming soon