See likes

See likes given/taken


Your posts liked by others

Pages: [1]
Post info No. of Likes
Re: Carbonda FM909 Got some picture of my XL size frame for you.
Waiting for delivery now  :)

December 20, 2021, 02:13:29 AM
12
Re: Carbonda FM909
Yon can apply 3M 2228 tape, it is pretty thick and protects well from stone impacts.

This is what I did. Made good experience with previous bikes

January 21, 2022, 03:18:27 AM
1
Re: Carbonda FM909
I am thinking about something like that:

https://noso.store/pl/p/Hybrydowa-oslona-ramy-powloka-absorbujaca/316?gclid=CjwKCAiA0KmPBhBqEiwAJqKK40-rTjPSufPxFgNhM6W0mD4Am2I7wDlkvWdwK2UlX0O63zoLbGrSlBoCc8UQAvD_BwE

Looks like being bullet proofed  ;D

January 21, 2022, 05:18:18 AM
1
Re: Carbonda FM909 Assembly finished, first ride is waiting for better weather  ;D

10,8kg in XL Size

Remarks:
Magura 4 piston caliper with 180mm Rotor in the rear requires filing action at the caliper otherwise it will not fit
Rear axle is too long as many others already mentioned, seems to be systematic problem
Lower Bolt for shock mounting is too short, shock does not move any longer when screw is tightened

January 24, 2022, 03:11:40 AM
7
Re: Carbonda FM909
Complicated  8)
I'm going to buy SLX m8100 with 52 mm chainline. Have 34T chainring, will check if it fits - if not- will use 32T. Problem is, that I will use non boost wheels with boost adapter for now. Let's see how it will perform.

Ok, same chainline as the XCX.
The 34T chainring which came with the crankset had no problem with the frame.

January 24, 2022, 06:01:15 AM
1
Re: Carbonda FM909
Sorry. I was under the impression from earlier discussion that the bar shown wasn't included (or possible to get) with this frame. It appears I was mistaken.  Thank you.  I would like to run this bar/headset with the Fm936 frame if possible.

With FM936 this handlebar will unfortunately not work because you can´t use ACR headset with FM936.

February 10, 2022, 01:35:06 AM
2
Re: Carbonda FM909
Does anyone have a diagram of how the headset goes together? Is the top bearing, then that half circle thing, then the top cap and washer? That leaves a hole…

First the top bearing, then that half circle thing, then the washer (if necessary and you have to cut the washer to keep the hole for the cables) and then the top cap.
If you use internal routing (through the headset) I recommend to use FSA ACR headset.
Why? The half circle thing is much better with rounded edges and the top cap has a sealing.

February 28, 2022, 04:54:51 AM
1
Re: Carbonda FM909
Where did you order? is not included in Sidluxe? need to buy seperately?
Wing told me I need to buy seperately.
At Rockshox dealer
No
Yes
✌️

May 03, 2022, 01:24:53 PM
1
Re: Carbonda FM909
I wonder if it could be attained via a custom linkage... that would also bring the bb up a smidge

I REALLY wanted one of these frames.. but I need to see how they fair under heavier riders first.

Ride 909 in XL since 1000km with 105kg naked.
No problem!

July 30, 2022, 10:48:20 AM
1