Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - was8v

Pages: [1]
1
Component Deals & Selection / Re: Meroca MT420 brakes any good?
« on: April 07, 2022, 01:52:54 AM »
It's a bit hard to tell as the Shimano servo wave makes them feel different

So Vs Alivio 2 pots which are non servo wave, they have similar modulation but more power


Vs Deore 2 pot which are servo wave, the deores have less modulation, more grabby up front, deores feel more more instantly powerful in the car park test but are ultimately less powerful

Xt 4 pot are servo wave and again have that up front grabby power that makes them feel more powerful in the car parks. Ultimately the xts feel like the stop better

However I do not like xt servo wave, I find it too grabby and much prefer the Alivio brake feel feel, and my hopebrakes.

That's why I like the mt420s.

I once thought about pairing Alivio non servo levers to Deore 4 pot calipers as the ultimate cheap brake.

But then mt420s came along and are effectively just that.

So if you like that grabby upfront power, then get Shimano servo wave 4 pots.

However if modulation is king, mt420s are a bargain.

I drive an 90's 911, jumping in from a modern car the brakes feel soft.... But have endless modulation and stopping power. It's a similar comparison.

2
Component Deals & Selection / Re: Meroca MT420 brakes any good?
« on: March 26, 2022, 04:07:41 PM »
I have these with Kingstop sintered pads

Other brakes I have are Shimano Alivio and Deore

I have hope v4 on an enduro bike, and used to have XT  4 pot on that

These are fab! Not the same ultimate power of the v4, but way better than Alivio and more modulation than either Deore or xt.

Bargain.

3
29er / Re: Airwolf YFM-026 - 1 month in
« on: January 05, 2022, 03:16:41 PM »
Looks like the geometry was designed around a 100/120 fork so you should be good to go.

4
29er / Re: Hardcore Hardtails?
« on: November 23, 2021, 04:10:18 PM »
I think you are out of luck, they just seem to do xc geo

I have the airwolf, its no hardcore hardtailm its a highball copy, an xc bike

I'd just get an alloy on-one scandal, check their ebay for seconds, frames are £250 there

5
Component Deals & Selection / Re: Gorilla Brakes pads
« on: October 15, 2021, 11:49:32 AM »
Gorilla pads are great, been running them for years with consistent performance.

6
29er / Re: Airwolf YFM-026 - 1 month in
« on: October 15, 2021, 11:45:22 AM »
That's not a good look....

How much seatpost did you have in the frame? Was it below this join?

Any seatpost shims?

Let is know what they say. You should also be protected by credit card.

7
Component Deals & Selection / Re: What's your go to bottom bracket?
« on: October 08, 2021, 06:24:41 AM »
I run Un71 square taper on one bike, not changed that in many years! They will fit any BSA bottom bracket!

8
Component Deals & Selection / Re: What's your go to bottom bracket?
« on: October 03, 2021, 03:06:21 PM »
In the UK for mtb or gravel the only solution is Hope.

9
29er / Re: Airwolf YFM-026 - 1 month in
« on: September 30, 2021, 04:22:29 AM »
What size is your frame?

@carbonazza its a large

@nicklej yeah they are quite long for a china direct frame (its why I chose it!) 450 reach on the large. I am also 180cm and will run a 50mm stem and inline seatpost.

Some more info I've collected on this frame:

Video of it on a test rig: http://video01.alibaba.com/vod-icbu/7c569251818fbca4/rwmGfhDkuafxuGYiGQd/Y50kpUZpVAw5oAsTQch_295718423364_sd_hq.mp4?w=962&h=540&e=sd&t=2101e38516329920937882481e9e64

From: https://yaoflying.en.alibaba.com/product/62419780834-804391055/2020_29er_carbon_mountain_bike_frame_full_toray_T1000_carbon_hardtail_mtb_frame_with_135_9_142_12mm_hook_XC_carbon_mtb_frame.html?spm=a2700.shop_index.82.7.7ddf112d78JMhF

There is a little review here showing fork clearance: https://catalog.alibuy.biz/product/airwolf-yfm026-hardtail/

10
29er / Re: Airwolf YFM-026 - 1 month in
« on: September 29, 2021, 04:20:11 AM »
My frame is a large, the fork is a Manitou M30 29er 100mm axle with straight steerer and reducer crown.

I do have a boost lyrik I could try to show rockshox if someone wants.



Mine was from this link https://www.aliexpress.com/item/4001271470282.html I went the cheapest delivery and it came quickly without any further tax to pay. Look at their listing, the prices and delivery fluctuates a bit, also check their ebay - I paid £243 total delivered and then $15 extra for a spare dropout set. I designed the decals myself and got them cut and sent by an aliexpress seller for about £3.50!

11
29er / Re: Airwolf YFM-026 - 1 month in
« on: September 28, 2021, 09:24:03 AM »
Brill thanks for the review!

I'm British so get the Mint Sauce references! I've also ridden 7th Secret on a Giant Reign... glad the Airwolf was a blast.

I just got one too, not built yet but went for the 142 rear end. I got it as you say for those less Gnar rides but glad it can cope on the fun stuff too.



12
I have a set of these Fovno Phantom cranks just arrive too.

I notice they are different from the seller's pictures!

Mine have a dub style adjuster on the non drive side

And a tapered hex interface for the drive side crank, rather than the spline in the original pictures.

Yours look to be the same as mine! I wonder why they made the change from the spline?

Other buyers report the non drive side crank falling off! Due to the bolt working loose. Be sure to remove the non drive side bolt (its says "do not remove") add thread lock and re-torque.

Also other buyers report these axle bolts are soft - so if you have an old steel octalink bolt use that to torque the crank to the axle, then replace the alloy bolt with threadlock.

See here http://chinertown.com/index.php/topic,2959.0.html

Pages: [1]