Chinertown

Chinese Carbon MTB => 29er => Topic started by: blast_off on May 17, 2017, 06:38:21 AM

Title: CS-FS29
Post by: blast_off on May 17, 2017, 06:38:21 AM

http://www.xmcarbonspeed.com/Productinfo.asp?f=1527

Just wondering if anyone has built one of these? They look like a new Scott Spark RC clone, although the numbers are  not exact. Spoke to Peter about boost available, and he mentioned the 27.5 boost frame in the same style, but it's for way more suspension.  I asked if I could swap out the link from the 29er to the 27.5 frame, but I don't think he was ready for a question like that.

Title: Re: CS-FS29
Post by: lRaphl on May 19, 2017, 11:47:01 AM

I'm also interested to know a bit more about a build with this frame. Looks like a good alternative to the Dengfu M06.

Title: Re: CS-FS29
Post by: charlesrg on May 19, 2017, 01:14:26 PM

Have you guys seen this: http://chinertown.com/index.php/topic,1180.0.html ?

Title: Re: CS-FS29
Post by: lRaphl on May 19, 2017, 01:46:25 PM

Yes but could not remember what thread it was and was looking for it! There is information about the brake mounts being on the seat stays instead of chain stays and that being problematic.

Thanks

Title: Re: CS-FS29
Post by: ChrisCarbon on June 16, 2017, 12:02:24 PM

Any news on this frame?
Looks very nice!

Title: Re: CS-FS29
Post by: teeroy on August 05, 2025, 12:46:44 PM

Anyone know where I can get a derailed hanger for this frame?   Thanks!

Title: Re: CS-FS29
Post by: Ludo on August 05, 2025, 01:55:33 PM

The guy behind this brand is on this forums, peterXu ;)

Title: Re: CS-FS29
Post by: teeroy on August 13, 2025, 01:13:32 PM

Yup Peter is the guy.  Do you have a link?  Thanks

Title: Re: CS-FS29
Post by: R-J on August 13, 2025, 01:50:07 PM

Also please note that this frame has the "old" 142mm rear spacing, not 148mm boost.

Maybe good if you want to use old (8+ years) wheels, but current wheels will not fit.

For me, that'd be way more important than the brake mounts.

The CS121 has boost spacing.

Title: Re: CS-FS29
Post by: idann98 on August 24, 2025, 10:43:44 AM

Almost finished, just need to fit the cassette and change the fork stickers to sleath