Print Page - Tiny hole in new frame, normal?

Title: Tiny hole in new frame, normal?
Post by: samroy92 on February 07, 2018, 04:24:25 PM

Hi guys I just received the Workswell 062 carbon frame, and just about the bottom bracket there is a tiny pinhole:

https://imgur.com/a/0BQ4A (https://imgur.com/a/0BQ4A)

(https://imgur.com/a/0BQ4A)

Is this normal?

Title: Re: Tiny hole in new frame, normal?
Post by: bxcc on February 07, 2018, 05:33:59 PM

Yes it's for running a front derailleur cable. The hole looks weird though. Any chance you could take a clearer picture?

Title: Re: Tiny hole in new frame, normal?
Post by: Jonathan on February 08, 2018, 01:17:20 AM

I think your information is very useful for me.

Title: Re: Tiny hole in new frame, normal?
Post by: carbonazza on February 08, 2018, 02:40:52 AM

If you do not use a front derailleur, plug this hole with silicone or a rubber plug to limit water ingress.

Title: Re: Tiny hole in new frame, normal?
Post by: samroy92 on February 12, 2018, 12:50:38 PM

Quote from: bxcc on February 07, 2018, 05:33:59 PM
Yes it's for running a front derailleur cable. The hole looks weird though. Any chance you could take a clearer picture?

You were right, after putting the bike together I found out it was for the front derailleur cable. Thanks a bunch!

Title: Re: Tiny hole in new frame, normal?
Post by: samroy92 on February 12, 2018, 12:51:08 PM

Quote from: carbonazza on February 08, 2018, 02:40:52 AM
If you do not use a front derailleur, plug this hole with silicone or a rubber plug to limit water ingress.

Good tip, yes I decided to go with single speed in the front, thanks!

Chinertown

Chinese Carbon MTB => 29er => Topic started by: samroy92 on February 07, 2018, 04:24:25 PM