Chinertown

Chinese Carbon Road Bikes => Road Bike Frames, Wheels & Components => Topic started by: bremerradkurier on April 30, 2024, 01:50:27 PM

Title: Clip on aerobars for integrated handlebars
Post by: bremerradkurier on April 30, 2024, 01:50:27 PM

Saw this today-clamp appears somewhat adjustable, but hoping somebody else was brave enough to try these first ;-)

Not a whole lot of me too resellers so far.

https://www.aliexpress.us/item/3256806076922208.html?spm=a2g0o.detail.pcDetailBottomMoreOtherSeller.24.12fb6b9bh6VNR5&gps-id=pcDetailBottomMoreOtherSeller&scm=1007.40000.326746.0&scm_id=1007.40000.326746.0&scm-url=1007.40000.326746.0&pvid=a1b39324-da73-45d6-b1e1-7e355b283c0a&_t=gps-id:pcDetailBottomMoreOtherSeller,scm-url:1007.40000.326746.0,pvid:a1b39324-da73-45d6-b1e1-7e355b283c0a,tpp_buckets:668%232846%238115%23821&pdp_npi=4%40dis%21USD%2150.42%2150.42%21%21%21363.52%21363.52%21%40210384cc17145026510915382e89fe%2112000036520146018%21rec%21US%211699911272%21&utparam-url=scene%3ApcDetailBottomMoreOtherSeller%7Cquery_from%3A#nav-review (https://www.aliexpress.us/item/3256806076922208.html?spm=a2g0o.detail.pcDetailBottomMoreOtherSeller.24.12fb6b9bh6VNR5&gps-id=pcDetailBottomMoreOtherSeller&scm=1007.40000.326746.0&scm_id=1007.40000.326746.0&scm-url=1007.40000.326746.0&pvid=a1b39324-da73-45d6-b1e1-7e355b283c0a&_t=gps-id:pcDetailBottomMoreOtherSeller,scm-url:1007.40000.326746.0,pvid:a1b39324-da73-45d6-b1e1-7e355b283c0a,tpp_buckets:668%232846%238115%23821&pdp_npi=4%40dis%21USD%2150.42%2150.42%21%21%21363.52%21363.52%21%40210384cc17145026510915382e89fe%2112000036520146018%21rec%21US%211699911272%21&utparam-url=scene%3ApcDetailBottomMoreOtherSeller%7Cquery_from%3A#nav-review)

Title: Re: Clip on aerobars for integrated handlebars
Post by: ejump0 on April 30, 2024, 06:09:55 PM

imo:
- carbon flat top handlebars arent meant to be clamped as it probably arent reinforced to handle squeeze force. but with flat-wide profile, user may get away without clamping with high torque as the clipon wont roll fwd or backward
- the left n right clamps might be too far apart. workaround: the left n right clamp may need to be swapped so the arm cup are inboard. I n S bars a no go, J-bar need to angle inward so hand grips are closer together.
- cant adjust tilt, thus high angle J-bar preferred