Technical Specifications:
Brand: Spcycle
Model: HB-068
Material: T1000 Carbon Fiber, High strength aluminum alloy
Finish: Matte
Stem Length: 60/70/80/90/100mm
Stem Angle: 6 Degree
Bar Width(Centre-To-Centre): 400/420/440/460mm, 16 degrees of flare
Reach: 69mm
Drop: 116mm
Steerer clamp: 1-1/8''(28.6mm)
Weight: 930G±20G(Includes integrated handlebar, rest bar)
Features1: Support Computer Mount
Features2: Full integrated cable
Features3: Ergonomics Technology
Features4: Monocoque mold manufacturing
Features4: Can adjust the length, height and grip angle of the arm rest shells
Do a 340 and 120/130 stem length.
how to order?
Quote from: RDY on January 12, 2025, 06:35:03 AM
Do a 340 and 120/130 stem length.
@spcycle any chance of this? there are more and more gravel stage races which include a prologue TT on dirt. narrow bars and an easily detachable clip on would be perfect.
I was wondering wether or not you can use it with a mechanical groupset. The holes where the cables are supposed to go in look like you can only fit the hydralic lines. This would make sense if they are only ment for electronic groupsets.
Btw i asked them and the price including shipping to germany would be about 308 dollar.
This cockpit has potential.
a. does it has angle risers just below the bridge armcup plate, so that the plate and the mono- bar willl be tilted at certain degree?
b. can it be installled only up until the armcup plate ,without the mono-bar protrusions part? (meaning user can install 1piece aero extensions+arm cup single piece like fastTT/Winow from that plate)
Where can I buy it? I couldn't find it on the official spcycle.com site. Tnx.
We made changes. HB-068 There is enough space to run the mechanical set. The handlebars are already listed on the spcycle official website. Friends in need can place an order.
https://www.sp-cycle.com/Spcycle-HB-068-Aero-Carbon-Gravel-Bike-Handlebar-Full-Hidden-Cable-Road-Integrated-Handlebar-With-Rest-Bar-p6435319.html
Why u made such a wide bars on the hoods? Who on earth uses 44 or better 46 wide handlebars today? Those should be replaced with 36 and 38.
I am 187 big boy and using 38 with flare for gravel.
right, im 195 cm and running 38 top 40 drops, I could see maybe 38 to a 42 in the drops if you're really worried about having control...
All the big sellers now on AliExpress are either narrow or offer super narrow options. I'd buy this if it offered a 340 with significantly longer stem. Or better yet if they offered a 340 bar with the same attachment point and option for a separate stem.
I would be interested if narrow width was available with longer stems
We are modifying the mold and in the future we will only sell the following sizes
Handlebar width 380mm/400mm/420mm
Stem Length 80mm/90mm/100mm/110mm/120mm
Quote from: spcycle on April 27, 2025, 03:49:54 AM
We made changes. HB-068 There is enough space to run the mechanical set. The handlebars are already listed on the spcycle official website. Friends in need can place an order.
https://www.sp-cycle.com/Spcycle-HB-068-Aero-Carbon-Gravel-Bike-Handlebar-Full-Hidden-Cable-Road-Integrated-Handlebar-With-Rest-Bar-p6435319.html
is this the same dimensions as the canyon gear groove bar?
regarding diameter of the beam etc..?
best regards
armin
Has anyone bought this bar and is able to share their experience?
No experience so far?
Seems like no much alternatives to this?
I ordered the handlebar, following my positive experience with the R088 frame.
Did my first short ride today, but it is my first aero bar so I lack any experience.
If you have any questions, just reach out.
Quote from: MarMirZ990 on November 21, 2025, 01:23:25 PM
I ordered the handlebar, following my positive experience with the R088 frame.
Did my first short ride today, but it is my first aero bar so I lack any experience.
If you have any questions, just reach out.
Thanks for sharing. Do you know the weight of the cockip alone? Without aerobar and spacers
Unfortunately, I forgot to weigh the handlebar before installing it ::)
The SP cycle website says 325 g for the bar only.
I will give an update when I get the chance, I will switch the frame beginning of next year.
Small update on the weight, without the handlebar itself though.
Total weight of the Aero Bar is 628.6 g, the complete indicated weight from SP incl. the Bar is 950 g.
Therefore, I assume the handlebar is ~ 350 g as mentioned above.
Quote from: MarMirZ990 on November 21, 2025, 01:23:25 PM
I ordered the handlebar, following my positive experience with the R088 frame.
Did my first short ride today, but it is my first aero bar so I lack any experience.
If you have any questions, just reach out.
I've got a few questions, maybe you can help me out:
Has it been comfortable until now?
How high is the stack of the armrests?
This version can not be angled, right?
I am looking at this or the HB-069 and can not decide on what would be more suitable for ultra long distances. I am going to take part in NC4K next year, so I need a good fitting and reliable solution. They are also going to be my first aerobars, want to attach them to my Dengfu R12.
Thanks!
Inhave these bars and they are really good. I wanted to replace the stock cockpit in my Velobuild CX and these ones do the job really well. Might get another set for a different bike
Quote from: MarMirZ990 on November 23, 2025, 11:18:38 AM
Small update on the weight, without the handlebar itself though.
Total weight of the Aero Bar is 628.6 g, the complete indicated weight from SP incl. the Bar is 950 g.
Therefore, I assume the handlebar is ~ 350 g as mentioned above.
I'm wondering if the Canyon Aero Groove Bar is compatibel with this handelbar (I already have it the Canyon solution). Would it be possible the you measure the distance of the two bolts and the area of the adapter?
Quote from: Luewi on December 03, 2025, 05:06:05 AM
I've got a few questions, maybe you can help me out:
Has it been comfortable until now?
How high is the stack of the armrests?
This version can not be angled, right?
I am looking at this or the HB-069 and can not decide on what would be more suitable for ultra long distances. I am going to take part in NC4K next year, so I need a good fitting and reliable solution. They are also going to be my first aerobars, want to attach them to my Dengfu R12.
Thanks!
You can adjust the height of the arm rest with different spacers, but you have to use all spacers due to the bolt length. I am currently running ~ 35 mm height arm rest to handle bar top. Highest position is ~ 45 mm and lowest is ~ 10 mm. The grips can be angleded from flat full on aero to 90 degrees or whatever you need in between. I cannot really tell how good or comfortable the bars yet, my longest ride this winter was just 70 km. I have to get used to it, I will also take part in some ultras next year.
Quote from: WestTown on December 03, 2025, 10:05:22 AM
I'm wondering if the Canyon Aero Groove Bar is compatibel with this handelbar (I already have it the Canyon solution). Would it be possible the you measure the distance of the two bolts and the area of the adapter?
My caliper is currently broken, but the distance between the bolts seems to be 35 mm.
Edit: Any idea how the mount the Garmin? I don't really like the current position, too far forward and really tight between the grips...
turn the Garmin Mount 180deg. "direction to seatpost"
Is the "TT clip-on" stable enough?
Quote from: mangart on January 08, 2026, 02:30:13 AM
turn the Garmin Mount 180deg. "direction to seatpost"
Is the "TT clip-on" stable enough?
I would not put my full body weight on the clip-on, but so far I have zero issues and it is stiff enough.
The handlebars + TT survived Race around Rwanda.