Chinertown
Chinese Carbon MTB => 29er => Topic started by: Iztok on May 12, 2025, 09:11:50 AM
-
I have bought carbon frame from Ceccotti - DCMF07 29er (Full inner Rev) 148*12 BB92 http://www.ceccottibike.com/product/html/?194.html
I payed 335$ with shipping, i ordered L size with chameleon paint.
Here are some pictures from seller before shipping:
(http://)
So now i have to wait for delivery.
-
Nice!
Plan on putting some clear 3M film to protect that nice paint job!
-
I will protect it.
Now i need some advice for components.
I am thinking to buy RS SID fork but, i do not know if 120mm or 100mm version. If 100mm, i will look for used ultimate, what would you advise me? And what is the thing with different offset?
Then about bottom bracket, is stock that comes with chinese bikes ok, or should i buy shimano bb92 xtr version and use this?
-
Looks good! I ordered the same frame a few days ago.
Do you know what the chainline is? I asked the seller but he doesn't understand what I mean...
-
did you get the frame?
i’m ordering one tomorrow for cheap light xc build (also you color) with all chinese components
im 184cm looking at the L too
-
L is ok for this height 👍
I got it at home, did not start on the project yet
..
-
nice!
send some photos :)
i’ve ordered mine in L
elite carbon wheels
and more goods that on the way
-
Hi all! My first post.
I got mine a few days ago, and starting the project just now.
Any educated quesses about how much torque you can put on the little scew in the seatpost wedge clamp?
I think some carbon paste is a good idea here.
-
a not-too-educated opinion on seatpost-clamp-torque i would not go any further than 5Nm. Just juse Carbon paste and start low, and only use as much as needed to stop it from sliding
other than that - nice color and weight, i´m looking forward to see the final product someday ;)
-
Hi all! My first post.
I got mine a few days ago, and starting the project just now.
Any educated quesses about how much torque you can put on the little scew in the seatpost wedge clamp?
I think some carbon paste is a good idea here.
thats awesome!
mine will arrive next week (hope so)
what parts are you planing to put on it?
-
Build list:
- Sram GX Eagle 12S drivetrain
Rockshox SID 120mm oem fork
10+ years old wheelset with chinese 30mm wide carbon rims, have to use boost adapters. This is the weakest link of my build, but if I like the ride, then maybe invest on new wheels.
Sram Level Stealth two-piston brakes
Elita One seatpost
Chinese carbon saddle
Old Enve SWP carbon handlebar
Kalloy Uno 60mm stem
"Sram" foam grips
XT pedals
Maxxis Rekon Race 2.4" tires, unsure still if I go for tanwall or standard black
Took me 4 hours to tape the damn thing, decided to use two tone taping, clear and transparent carbon for some extra bling 8)
Will post pictures.
-
good mine today
the paint quality is impressive, overall i’m very satisfied form the frame
still waiting for the elite carbon wheels and then i will start
-
good mine today
the paint quality is impressive, overall i’m very satisfied form the frame
still waiting for the elite carbon wheels and then i will start
Yes, looking good, almost wish I had gone for the glossy paintjob instead of matte.
Mine is ready. well sort of, there is a bad problem with the rear hub, turns freely in just one direction :-\. Was not able to solve that even when taking the hub apart two times, have to take it to a shop, if they could help.
Also didn't realise that my fork is for 180mm disc rotors not 160mm, doh.
Apart from those, very satisfied with the build, would like the look of a slammed stem, but it's not working for me at this shape that I'm at the moment.
One thing to mention, is that the standover is pretty tall, top tube hits my nuts. But i think it's okay, because the bike is meant for gravel paths and easier trails. I have other bikes for gnarly stuff.
-
the bike look phenomenal!
bought the same stem but 7deg
couple of questions:
in the package i had something that looks like a rubber gasket/grommet for the seat post, did you put it?
i got the bb92 press fit to bsa 24
bought this crank:
I just found this on AliExpress: US $68.38 | GOLDIX MTB Crankset BSA 24mm 165mm 170mm 175mm Direct Mount R-SPEC Trail Hollow Bike Crank Spindle DH AM XC for Shimano SRAM
https://a.aliexpress.com/_ondP8Yt
but when i press it to the frame the chainring almost hit the frame,
did you put any spacer between the crank arm to the bb?
-
Thanks!
I'm not sure if the rubber gasket is for the seat post or headset, but I put it over the headset to partially cover the hole for the cables.
There is still room for rain to get in though, it seems that there is actually room for another cable yet, could it be for a dropper post?
Can't really help you with crankset though, mine is Sram DUB with 32t chainring. I would not want it to be any closer to the frame, couple of millimeters. I put only one 2mm spacer between the crankarm and bb, as per instructions. When I measured the chainline, it was around 50-52mm.
What tooth size chainring did you get?
-
Thanks!
I'm not sure if the rubber gasket is for the seat post or headset, but I put it over the headset to partially cover the hole for the cables.
There is still room for rain to get in though, it seems that there is actually room for another cable yet, could it be for a dropper post?
Can't really help you with crankset though, mine is Sram DUB with 32t chainring. I would not want it to be any closer to the frame, couple of millimeters. I put only one 2mm spacer between the crankarm and bb, as per instructions. When I measured the chainline, it was around 50-52mm.
What tooth size chainring did you get?
i’ve used 34t chain ring
this is with 5mm spacer i think its look spaced enough from the frame,
still need to check the chain line
-
i’ve used 34t chain ring
this is with 5mm spacer i think its look spaced enough from the frame,
still need to check the chain line
Yes, there seems to be plenty of space.