Chinertown
Chinese Carbon Road Bikes => Road Bike Frames, Wheels & Components => Topic started by: BikeLab on July 17, 2025, 03:51:11 PM
-
Hello Guys,
i recently ordered Elilee X310 165mm 24mm titanium spindle paired with XCADEY spider PM and Pass Quest 52/36 chainrings.
I want to install them on my Speeder SC-R55D with Shimano BB86 pressfit.
Does anyone know how much spacers and which side should i put?
Elilee specifies their spindle lenght as 94mm, Shimano BB86 is 90.5mm width with outer shells.
Pass Quest chainrings also include one spacer (i think 0.5mm) and recommend to install it on DS (driveside).
If i calculated it well i should put 3mm of spacers and leave 0.5mm for preload adjuster.
Should i split it like 2mm DS and 1mm NDS? Will 1.5-2 mm chainline change affect FD work?
-
Hi!
there is a video that explains the procedure, I don't know if it is official from elilee tho
https://www.youtube.com/watch?v=Fwc-NjzX7QU
Hope it helps!
-
Hello Guys,
i recently ordered Elilee X310 165mm 24mm titanium spindle paired with XCADEY spider PM and Pass Quest 52/36 chainrings.
I want to install them on my Speeder SC-R55D with Shimano BB86 pressfit.
Does anyone know how much spacers and which side should i put?
Elilee specifies their spindle lenght as 94mm, Shimano BB86 is 90.5mm width with outer shells.
Pass Quest chainrings also include one spacer (i think 0.5mm) and recommend to install it on DS (driveside).
If i calculated it well i should put 3mm of spacers and leave 0.5mm for preload adjuster.
Should i split it like 2mm DS and 1mm NDS? Will 1.5-2 mm chainline change affect FD work?
Just install it and measure from each arm to the bottle cage both and add as many spacers as needed for it to be even
-
Hi!
there is a video that explains the procedure, I don't know if it is official from elilee tho
https://www.youtube.com/watch?v=Fwc-NjzX7QU
Hope it helps!
Problem here is that he adds all spacers on NDS and thats not good for Q Factor.
-
Problem here is that he adds all spacers on NDS and thats not good for Q Factor.
Crankset construction (assuming it is the same clone of Cybrei as the rest) allows to add spacers in whatever combination you need. The only requirement is that you have equal Q on both sides, which can be measured from any symmetrical element of the frame. For example, it can be distance from chainstays or downtube to cranks). For Big Rock Cranks I used total 3mm of spacers out of 5 available from the box on my SC R55-D.
I recommend to use washer-type spacers instead of wide ones as with the way crankset is tightened you may risk to simply crack it (yes, it has happened to me).
-
Crankset construction (assuming it is the same clone of Cybrei as the rest) allows to add spacers in whatever combination you need. The only requirement is that you have equal Q on both sides, which can be measured from any symmetrical element of the frame. For example, it can be distance from chainstays or downtube to cranks). For Big Rock Cranks I used total 3mm of spacers out of 5 available from the box on my SC R55-D.
I recommend to use washer-type spacers instead of wide ones as with the way crankset is tightened you may risk to simply crack it (yes, it has happened to me).
Isnt the chain line change a problem for Ultegra FD?
-
Isnt the chain line change a problem for Ultegra FD?
What exactly do you mean? Of course you have to adjust cage position if you adjust the chainline. Other than that, no problems