Chinertown
Other Resources => Maintenance, Mechanics, & Tools => Topic started by: amacal1 on May 04, 2026, 12:13:15 PM
-
I designed and 3d printed a computer / garmin mount for my Twitter C6 stock bars. The stock bars have the computer mount holes on a curved portion of the bar, which makes modeling something a little tricky. The frame came with a computer mount, but I never liked it and it eventually fatigued and broke because, I guess, the stress caused by being mounted on a curved portion of the bar. Anyway, hit me up if you have a C6 and are interested in downloading and printing this. Printed in PETG and it's proven plenty strong enough. I had one fail after 2-3months of use where the 1/4turn mount is. I will likely re-design in the future so that it's not an all-in-one design and you can simply replace the 1/4turn mount if that happens (or replace with an off-the-shelft garmin 1/4turn mount).
It's very basic and not very fancy. I have some ideas to make it cooler and more functional, but I did the first one really fast and then never had the motivation to go back and improve it. Such is life! I'll get around to it eventually.