Chinertown

Chinese Carbon Road Bikes => Road Bike Frames, Wheels & Components => Topic started by: shanetab on November 16, 2026, 03:36:30 PM

Title: Velobuild VB-TT-023 + Wheeltop EDS TT Build Check
Post by: shanetab on November 16, 2026, 03:36:30 PM
Hey everyone,
I'm gearing up for my first 70.3 next summer (about 8 months from now) and am putting together a dedicated budget-friendly TT bike for it, so I'm building up a Velobuild VB-TT-023 frameset as my race rig.
I have a pre-purchase TT bike fit scheduled for the end of this month to dial in my exact frame size, stack/reach, and crank length before I hit "order," and I already have a local mechanic lined up to assemble it once everything arrives. Before I finalize my shopping carts, I wanted to get a sanity check from the community to make sure I'm not overlooking any compatibility quirks or small parts.

Current Build List
Frameset: Velobuild VB-TT-023 (disc brake, T47) — planning to request an extra derailleur hanger, extra screws, top-tube bento box threads, & 70mm total stack spacers from Velobuild
Groupset: Wheeltop EDS TT Wireless Carbon Electronic (Hydraulic Disc Brake version)
Crankset / Power Meter: GEOID PM500 power meter crankset (24mm spindle, SENICX PR3 arms) + 4-bolt 110 BCD chainrings & chainring bolts
Bottom Bracket & Drivetrain: T47 24mm BB (ZTTO or SENICX), GOLDIX cassette, compatible chain
Wheels: Superteam 60/88mm carbon disc wheelset
Brakes: 2x Shimano-compatible rotors + lockrings
Tires & Tubes: Continental Grand Prix tires + inner tubes (with 80mm+ valve extenders or extra-long valve tubes)
Touchpoints: ISM Adamo saddle, titanium pedals, bar tape
Small Parts: Internal cable/hose foam dampener, hydraulic hose olives & insert pins

Questions I'd Appreciate Input On:
Wheeltop EDS TT + VB-TT-023 Experience: Has anyone here built up the VB-TT-023 with the Wheeltop EDS TT hydraulic groupset? Any routing quirks through the integrated stem/basebar, hose length issues, or firmware/setup tips I should know about?
Compatibility & Missing Pieces: Does anything in this drivetrain/brake setup clash (especially pairing the GEOID PM500 110 BCD spider/chainrings with the Wheeltop EDS TT)? Are there any small hardware items (specific rotor sizes, flat-mount caliper bolts, carbon paste, etc.) I should make sure to order upfront?
Bottom Bracket Check: Since the VB-TT-023 is T47 and the GEOID PM500 uses a 24mm spindle, is a standard T47 24mm BB (like ZTTO or SENICX) all I need here?
Carbon Stem Splitting Issue: I read some reports of the Velobuild carbon stem splitting past 2Nm and people recommending an alloy stem instead. Does anyone know if this is still a common issue on the VB-TT-023 (or if it's mostly limited to Size S)?
Shorter Stem/Basebar Bolts: I spoke with Chris at Velobuild and was told to get shorter screws (12mm including the bolt head, instead of the 20mm w/ head / 15mm w/o head bolts that ship with the bike). Has anyone else had to swap these out on the VB-TT-023, and are there any other hardware quirks I should prepare my mechanic for?
70.3 Setup Suggestions: Any recommendations for hydration/nutrition mounting on the VB-TT-023 (beyond the top-tube bento box threads) or tweaks you'd make to this list specifically for a 70.3?
Thanks in advance for any feedback or suggestions!
Title: Re: Velobuild VB-TT-023 + Wheeltop EDS TT Build Check
Post by: empathetic togue on November 16, 2026, 07:03:05 PM
NGL in both my profession and in researching bike builds i often use ai LLM tools as my first starting point. You have asked some pretty specific questions about compatibility between a variety of components. I have experience in using the LTwoo ERX TT groupset but not with the frame you are using. I asked ChatGPT GPT6.1 Sol (latest version) Medium (middle thinking mode) and it provided this response:

QuoteThe build is broadly workable, but the list is too vague in several places to confirm full compatibility. The cockpit is the main concern; the GEOID/Wheeltop combination is less problematic.

I'd give them the following advice.

1. Wheeltop EDS TT and frame routing

I haven't verified an owner report of this exact hydraulic Wheeltop/frame combination, so I can't confirm hose lengths or routing from experience.

Before buying, confirm the kit includes both brake levers, extension shifters, derailleurs required for their chosen setup, calipers, hoses and charging equipment. Check that the brake levers fit the basebar's internal diameter and insertion depth.

The mechanic should assemble the cockpit at the fitted height, route everything and check steering movement before shortening any hoses. "Wireless shifting" doesn't eliminate hydraulic hoses or necessarily all short control wires.

2. GEOID PM500 compatibility

There's no inherent incompatibility between the PM500 crankset and Wheeltop shifting. The power meter operates independently of the derailleurs. GEOID specifies a 24mm spindle and a 110BCD four-bolt spider paired with SENICX PR3 arms. geoid.com

However, they need to specify:
Missing detail   Why it matters
1× or 2×   Determines chainrings, bolts, front derailleur and chain-retention requirements.
Exact chainrings   Four-bolt 110BCD rings must match the spider's bolt arrangement. For 2×, choose a matched shifting pair.
Cassette model and range   "GOLDIX cassette" doesn't identify freehub compatibility, sprocket count or derailleur requirements.
Chain model   Must suit the chosen cassette and chainrings—not just carry the same speed designation.


For a 70.3 build, I'd consider spending slightly more on a Shimano cassette and a reputable compatible chain, prioritising predictable shifting and durability over small weight savings.

3. Bottom bracket

No—a generic "T47 24mm" description isn't sufficient. It must match both the crank spindle and the frame's shell width/bearing arrangement.

The forum contains references to an 86.5mm shell, while a completed build used a Token internal-bearing 24mm BB. That points towards the wide-shell, inboard-bearing configuration, but Chris should confirm the exact current specification before they order. chinertown.com

Ask for an exact compatible BB model or a written shell specification. Ceramic bearings are unnecessary here; correct dimensions and good sealing matter more.

4. Stem problems: not established as size-S-only

There is a size L owner report describing stem trouble, with Chris reportedly identifying overly long front bolts and supplying an aluminium replacement stem and bolts. That report establishes a cockpit/bolt issue on a large frame; it doesn't specifically prove carbon splitting on that frame. chinertown.com

I couldn't establish how common splitting is, whether the reported 2Nm threshold is accurate, or whether current production has resolved it.

My recommendation would be to request Velobuild's compatible aluminium replacement and correct bolts before shipment, with torque instructions. An arbitrary aftermarket stem may not fit the proprietary basebar and routing.

5. The shorter-bolt instruction needs clarification

"12mm including the head" is not a sufficiently clear purchase specification. Most socket-head bolts are measured under the head; countersunk bolts are normally measured overall.

Get Chris to specify the thread, head style, under-head length, washers and torque—or simply supply the correct bolts.

The mechanic must check both adequate thread engagement and clearance against bottoming out. A bolt can reach the specified torque while producing inadequate clamping if it bottoms out first.

6. Brakes and other missing parts

Before ordering, resolve these:
- Rotors: exact diameter, thickness and hub interface. Center Lock needs lockrings; six-bolt rotors need bolts.
- Caliper hardware: appropriate adapters and rear flat-mount bolt lengths for the frame's mounting thickness.
- Hose fittings: Wheeltop-approved olives and inserts; don't assume Shimano fittings fit.
- Wheels: matching freehub, thru-axle standards and tyre compatibility.
- Saddle: the particular ISM model and rail dimensions must suit the seatpost clamp.
- Assembly: headset/compression hardware, correct BB tool, bleed equipment, quick links and manufacturer-approved lubricants/assembly compounds.
For the 88mm rear rim, an 80mm valve alone won't work. Use an appropriately long valve or compatible extension with enough exposed length for inflation, and carry a spare that also fits.

7. Fit and 70.3 practicality

The fitter should provide pad stack and reach, saddle position, pad width and extension position—not only frame stack/reach.

Clarify whether the requested 70mm spacers are aerobar risers or under-stem spacers. Confirm the permitted height and matching bolt lengths; don't assume either arrangement is approved.

For racing, start with a secure between-the-arms bottle, accessible bento and a practical puncture kit, then add hydration capacity according to expected conditions and aid stations. Test the complete setup over long rides.

My priority order would be: resolve the cockpit, obtain the fit coordinates, confirm the exact BB, then finalise gearing and brake hardware. There's no obvious reason to abandon the build, but those details should be settled before placing the orders.

hope this is of help
Title: Re: Velobuild VB-TT-023 + Wheeltop EDS TT Build Check
Post by: klindsey00 on November 16, 2026, 08:09:38 PM
As far as the wheeltop group goes I'm sure the road group would be very similar in performance. Not many reviews on the TT version. On youtube one of the reviews notes there is a delay when shifting from the base bar due to the way shifting is configured (waits on a double press for FD shift). Routing the hoses should be no different than any other internally routed frame as long as the hoses are long enough.