See likes given/taken
Post info | No. of Likes |
---|---|
Re: Velobuild VB-R-177
Posting a reply we just published in the dedicated thread below in case any miss it. http://chinertown.com/index.php?topic=3683.msg36291#msg36291 I have finally found an easy yet permanent fix for the headset play issue when using the separate handlebar/stem combo. Please bare with me as I'll do my best to be clear and concise. You do not need an FSA ACR setup, nor disconnect any hydraulic or shift cables. Thank you Patliean1 for all the troubleshooting and your detailed assessment. We have been working on resolving the headset play issue some customers with the separate bar/stem combo have experienced and are happy to announce that the issue has been resolved by increasing the thickness of the C shaped bearing press by 0.5mm. All shipments since April have been sent with the new bearing press and we have also sent it to existing customers that have been affected and it has resolved their issues. If you have the separate handlebar/stem and are experiencing this issue please contact us for a new C shaped bearing press by email at info@velobuild.com New customer orders of the separate handlebar/stem will also include split spacers. May 13, 2022, 08:47:48 PM |
1 |
Re: Carbonda Cfr 1056
So I finished my bike about 1 month ago. Very very happy with it. A step (leap?) forwards coming from a Cube Aerial. Very direct, responsive, easy to ride and reassuring. Just rides fast. I go about 3-4km faster with 15 BPM less heartrate in my case. Can't find anything my Cube did better. Very happy with the end result! Picture was without bartape for easy last minute adjustment of the brake levers. Will take a picture of the driveside one day. But first I've got some KM's to shred! ![]() May 20, 2022, 04:42:39 PM |
1 |
Re: BXT Road 115 (BXT-ROAD-115)
I am considering to get the BXT road 115 frameset from BXT official store on AliExpress. Hi, I've bought the BXT-ROAD-115 from BXT official store and I'm very satisfied. The seller was very accommodating and always answered all my doubts. Since Now I've traveled 1.300Km, and since now no issue. I don't know which BB is better between Press Fit or BSA, in my case I've mounted a Shimano BSA, and it's seem good. Attached my bike. I'm curious, finally have you bought the BXT frame? kind regards, Luigi May 25, 2022, 04:16:55 AM |
1 |
Re: BXT Road 115 (BXT-ROAD-115)
Hi, congratulations on your BXT 115. Looks awesome! I want that too! Dropped seatstays, preferably 27.2 post and half-ish aero like the Tarmac SL7 The SL7 Fact-r 12 is the dream bike, but 6000 USD for a frame is too much. Sad thing with all the Chinese frames that quality control and weight is through the roof. May 29, 2022, 06:15:05 AM |
1 |
Re: TopCarbon TCGF066 gravel frame
I've finished the build of the TopCarbon TCGF066 for a friend. Thought I should leave my build report. Over all my experience has been good, I ordered directly from topcarbon contact and purchase through Alibaba. Had an issue with the lower headset bearing when assembling the fork, the bearing I purchased had to much chamfer on the top edge causing the fork to sit to high and bind with the headtube. Seller helped me out and sent the correct bearings with less chamfer. Routing of the integrated handlebar with a mechanical/hydraulic groupset was the all headache you could expect. I did make some attempts to use partial outers that ended in the block in the downtube but I couldn't figure out how to avoid the outers from separating from the downtube block when assembling the cockpit. I finally ended up doing full outers to the derailleurs. Over all the fit and finish of the frame has been good, my head tube looked good with some light sanding marks and the fit of the (correct) bearing is good. Have no pic of the complete assembly, but only missing the chain in the attached pic. May 31, 2022, 09:46:37 AM |
1 |
Re: Velobuild VB-R-168 Frame
Hello all Spending 1h for a proper QC will allow you not to spend hours to try to solve problem with angry customer. Maybe something to consider. June 01, 2022, 12:40:00 AM |
1 |
Re: Elite Wheel DRIVE 1,280 gram wheelset - Disc, 45mm
these seem like a lot of fun! Not so convinced about the carbon spokes though. How are they holding up over there? So far so good. That being said, I only have several hundred kms on it. I think though, if there were major problems with carbon spokes we’d probably start hearing it from Hyper wheel owners, who could have logged thousands of kms by now. Long-term prognosis over tens of thousands of kms? Only time will tell. June 01, 2022, 10:51:49 AM |
1 |
Re: [Q]Comfortable Long ride Gravel Frame.
I planned to build for riding more than 100km (70-80% pave road) Look at how the stack/reach from the aliexpress geometry picture compares to your current bike(s). You can check with https://geometrygeeks.bike/ too. Usually gravel frames are more relaxed, but not always. From memory, Tantan doesn't have a really good after sales service in case something happen. June 02, 2022, 02:29:11 AM |
1 |
Re: Looking for an aero frame with a round seatpost
I'd be surprised if they don't make a comeback. The industry is gearing up to push droppers for road. Tbh I'd welcome it .... descents are frighteningly steep here.
June 02, 2022, 07:52:15 PM |
1 |
Re: Velobuild VB-R-168 Frame
So a few updates, managed to score a good deal on a Rival Etap grouppo without a cassette. Basically there are no cassettes in stock in Australia until Sept, all the local bike shops have inventory though for complete groupset purchases ![]() Have taken it out for a few rides now, no issues. handled 1100w+ efforts but the biggest thing was the full hydro brakes. Juin Techs are great but man full hydro brakes are awesome. June 22, 2022, 07:18:19 AM |
1 |