See likes

See likes given/taken


Posts you liked

Pages: 1 ... 4 5 [6] 7 8 ... 72
Post info No. of Likes
New Year Promotion for FM-XC181 Full Suspension Mountain Bike Frame Only USD600 Dear All:

Thanks for all the supporting of our company Haideli, and the brand Tideace.
We got the promotion for the full suspension frame FM-XC181 for new year.

The price would be USD600/set with free shipping by HKEMS.
For the shipping by WXY without tax would be USD700/set(DPD without cutom fee).

Item included frame, clamp, headset, and BB92 bottom bracket and one piece downtube chain protective decal.

Attached the picture for reference.

Feel free to contact me via email if you got any question or interesting.
Eddy@haidelibicycle.com


Many thanks.

Eddy
November 17, 2021, 09:33:40 PM 		1
Re: The Shiny New AM831 Group Buy (A) Thread! I am buying a dvo topaz t3 from a guy who took it off his ibis, just fully serviced as well. Accessing the pump valve doesn't really bother me as I like to adjust the shock once and leave it as is haha..
November 17, 2021, 10:34:31 PM 		1
Re: Monsuta x Snacks AM831 build Update-
Bike has been put aside and is not ridden anymore since the rear flexes so much it's still rubbing the frame. I've been talking to Eddy about this and he said unfortunately shorter bolts did not fix the problem for them. They have fixed the mould for the rear triangle  but was told on Nov 7 that those new triangles won't be available for another month. Even then I'm not sure if we will be getting them to fix the issue or if it's something they will make us buy. I'm really hoping it's not the latter

So anyone wanting to purchase this frame should probably wait until.they produce and send out the frame with the new rear triangle
November 20, 2021, 10:53:13 AM 		1
Re: cybrsrce AM831 build I just got my frame. Assured by Eddy that the rear triangle was not an issue. Even asked him to double check. The rear triangle is so sloppy it’s a joke. Not even close to okay. I would look elsewhere. Unless you love the thrill of the gamble or the challenge of an engineering project.  Frame looks badass though!  Might end up being good if I can figure it out.
November 20, 2021, 12:32:06 PM 		1
Re: cybrsrce AM831 build
Quote from: FullCarbonAlchemist on November 20, 2021, 07:01:57 PM
What is the damping tune? If it’s stock aftermarket Medium then it’s probably over-damped. The closest comparable tune (2018-2021 SC Bronson) is Low/Low with 2.5 tokens in the positive chamber, not sure about negative spacers if any.

Of course lots of people aren’t super happy with the stock tune on SC bikes but it seems like a good starting point.

The Super Deluxe Ultimate for HT v2 that I got was a L/L tune but it had internal issues.  I though it was me causing problems with a damper swap to the standard body but Rockshox replaced it.  I ended up returning the replacement and getting a standard M/M tune version.  Two tokens and two bands and it is alright, I'm going to try three tokens and 3-4 bands.  Keep it under 300psi and should get full travel.

Everyone complaining on Youtube says the stock L/L tune doesn't have enough mid support but the M/M seems to have too much, at least at high PSI.   
November 20, 2021, 09:46:34 PM 		1
Re: Carbonda fm936 Thoughts My frame is finally painted and heading my way. I can’t wait to build it!
November 21, 2021, 03:36:34 PM 		1
Re: How to know which shock mounting hardware? From searching this site, looks like others are actually using ones that are larger than what the dealer is saying.  They're saying using these two. 

1. M8x22.86 - https://thelostco.com/products/the-real-2021-fox-mounting-hardware?variant=32303772631121
2. M8x30 -  https://thelostco.com/products/the-real-2021-fox-mounting-hardware?variant=32303770370129

Let me know if this is incorrect.  Thx.
November 22, 2021, 05:49:54 AM 		1
Re: cybrsrce AM831 build I ended up cutting my own nylon washer to fit despite having access to 3D printer.  Determined with my friend who is a mechanical engineer in fabrication and production that the nylon is better for this application than the material that would be used in the 3D printer.  We are going to order nylon washers in the exact measurements from a company he sources from. The spacers are going to have to serve as bushings because of a design flaw with this frame. If there is not pressure on the carbon pushing the bearings on to the upper link, you are relying on the strength of the bearings bond with the upper link to provide stability (not good). Because you need pressure on the carbon of the upper link and this link needs to pivot, it is essential in order to prevent wear and to not bind the suspension that the material used can be low friction.  I think if the bearings were pressed from the outside, this frame would work very well.
November 23, 2021, 01:40:34 PM 		1
Re: Hardcore Hardtails? A few XLs - all for 100mm travel.  Switching to a 140mm fork shifts angles, slackens ST and HT angles, raises bb, incites anger in purists, and causes cosmic anomalies.  However, it might make the frame closer to a hardcore hardtail.

Haideli M030- http://www.haidelibikes.com/product/showproduct.php?id=122  (similar to last iteration of S-works elite frame)

Lightcarbon LCM 908 https://lightcarbon.en.alibaba.com/product/60514746796-803172623/LightCarbon_29er_Carbon_Frame_Mountain_Bicycle_Frame_BB92_Pressfit_Bottom_Bracket_LCM908.html

Airwolf YFM026 (Santa Cruz Highball dimensions)
November 23, 2021, 02:38:32 PM 		1
DebonAir Upgrade Kit for RockShox Reba Fork Does anyone have the DebonAir seal head for the RS Reba A2 fork (part#11.4018.096.002)?  I know this a long shot but the kit is out of stock everywhere. It is an older but well maintained fork and I'm trying to upgrade it a bit so it is worthy of my new XC Lexon Riot 10 frame.  Thanks.
November 23, 2021, 09:17:32 PM 		1