See likes given/taken
Post info | No. of Likes |
---|---|
Re: Hygge Aero Carbon Frame
I figured out that I had not torqued the compression plug.. I have the new c ring and metal spacers. Is 4-6 nm enough? I have not used carbon paste on the expander plug, which I probably should do. I have used carbon paste everywhere, on the inside and outside of the steerer, on the expander plug and on the inside of the stem clamping area. Try 2-3 Nm for compression it should be enough and 7-8 for the expander plug. That is what I did after modifying the previous generation C-ring. Plus, apply thread lock on the nut side of the stem bolts, they tended to rattle themselves loose in my case. That was enough to keep things tight for 5000 km of use so far. November 06, 2024, 12:16:11 AM |
1 |