See likes given/taken
| Post info | No. of Likes |
|---|---|
Re: XM Carbon Speed - "Gran Tourismo" Frameset
Do you know (by experience?) if Shimano 105 rotors would face this issue ? If you mount the rotor correctly flat, then no issue. On current Gran Turismo frameset, we will remove all decals except the XMCS or CARBON SPEED on downtube for now. After we get our US trademark approved, we will figure out more western design. We are designing 2026 road racing frameset as well, which would be released in April 2026 I think. September 16, 2025, 06:36:04 AM |
1 |
|
Re: Seraph Bikes Superlight 836g X68 - Alternative to SL8 Fakes?
This listing just feels dodgy. https://tantanbikes.com/Ink-Green-Paint-24-Speed-Disc-Brake-Road-Bike-TT-X42-Carbon-Normal-Wheels-Wheeltop-Hydraulic-Electronic-Shifting-p6565762.html September 17, 2025, 10:10:13 AM |
1 |
Re: Long Teng / Mondince aero frame FM126 Indiegogo
Quite a sad day guys, I think they will not continue the Indiegogo and TBW(which I assume it's China's fundraising site similar to Indiegogo). They said that they will still continue to build the model in the near future. Sad for the backers and future backers which includes me. Well back to the drawing board for me again, so LCR017D or SCR-55D? Or any other suggestions? Hold on, where did they say that? I wanted to back it at the end of the month
September 18, 2025, 08:27:53 AM |
1 |
|
Budget Build BXT SL-115
I was interested in the BXT SL 115 but I found almost no user experience and „real world“ photos. So I decided to share my experience. May I introduce myself briefly: I am a Swiss cyclist, 61 years old and I live in a region with lots of hills. So please excuse the mistakes in my English writing. Many years ago, I was a racer, but today I enjoy cycling despite of the fact, that I lose my physical power from year to year. Some of you may know… I had many race bikes and I still prefer the racy style like Giant TCR or Cannondale Supersix Evo. I have two black bikes and I wanted now a colorful frame. But the prices for new bikes are much too expensive. So I set some goals: • 11 speed Di2 (used) • Hydraulic disc brakes • Fully integrated cable routing • < CHF 2'000.- (approx. US$ 2'500.-) • < 7.5 kg After some evenings of surfing in the internet, I ordered at Aliexpress a BXT SL 115, Elitewheels Edge and many other parts. As a group set I bought a used 11-speed Shimano Ultegra Di2. I don’t like cassettes beginning with 11-teeth cogs. I go for Shimano 14-28 teeth and I bought on ebay chainrings from Bikingreen 30/46. I expect no problems in the Swiss Alps. After 4 weeks the frame arrived. Pros: • Good packaging • Complete bike with headset, bottom bracket, handlebar, seatpost, etc. • Nice paint job; but you can feel the edge between black and red • Visually good quality Cons: • The rubber plugs for the DI2-cables for front and rear derailleur are missing • The BXT-logos are not under clear coat. I suppose they are water transfer film and this will not last long • The adapters for the break calipers were not included • The color of the frame is glossy, but the seatpost is matte • The headset cap is too thick. You have to cut the shaft of the fork too short, if you want to use the delivered cap. • The rubber cover for the seat post clamp doesn’t look good. The painting in this area is not neat. The installation of the bike was without any problem; even the fully integrated cable routing in the handlebar went straight forward. I almost finished the build. I will show photos of the bike and a detailled list of all parts (price and weight). September 29, 2025, 02:49:14 PM |
1 |