See likes

See likes given/taken


Posts you liked

Pages: [1]
Post info No. of Likes
Re: Seraph Bikes Superlight 836g X68 - Alternative to SL8 Fakes?
Quote from: Ride56 on December 16, 2025, 06:56:54 AM
I want to replace some screws with Ti-Screws. My frame didn‘t arrive yet, I can send you dimensions when I get the frame. So excited, since it’s the first bike I‘ll build.
Anybody know if the frame comes with Di2 battery holder?
it comes with the seatpost di2 holder. It dangles from the bottom of the seatpost, so depending on your saddle height, you may have to cut your seatpost to make it work.
December 16, 2025, 09:35:52 AM 		1
Re: Seraph Bikes Superlight 836g X68 - Alternative to SL8 Fakes?
Quote from: Ride56 on December 16, 2025, 06:56:54 AM
I want to replace some screws with Ti-Screws. My frame didn‘t arrive yet, I can send you dimensions when I get the frame. So excited, since it’s the first bike I‘ll build.
Anybody know if the frame comes with Di2 battery holder?


Pretty much in the same situation. Frame is on its way to me and I am trying to get everything ready in advance for a smooth build :)
December 16, 2025, 09:56:46 AM 		1
Re: Seraph Bikes Superlight 836g X68 - Alternative to SL8 Fakes?
Quote from: Ride56 on December 16, 2025, 10:53:59 AM
I've just seen in a video of a Specialized SL8 build you need a special brake adapter for the front brake with the specialized fork. Is it the same with the X68?
Yes, its shipped with the bike. Like the sl8, the spacing is non standard and you can only run a 160 rotor.
December 16, 2025, 01:36:04 PM 		1
Re: Seraph Bikes Superlight 836g X68 - Alternative to SL8 Fakes?
Quote from: Ride56 on January 01, 2026, 11:12:24 AM
So I just got my frame delivered, took quite a while during the holidays in germany. Do you need some Screw measurements or did you receive yours now?
Quite happy with mine, the paintjob looks really good, just the brake mounts are sprayed over quite a bit.

The adapter for front brake is not good, one counterbore is way too deep so I can't use it. You guys reckon Tantan will send me a replacement or just don't bother and get it somewhere else?
I propably wouldnt bother with it, its the perfect time to order an adapter from Chaser  :D :D
January 01, 2026, 01:03:19 PM 		1
Re: Seraph Bikes Superlight 836g X68 - Alternative to SL8 Fakes?
Quote from: Ride56 on January 10, 2026, 12:24:58 PM
Has anybody mounted aerobars on their Tantan cockpit?
I dont think its possible unless you can conjour up a custom clamping system.Theres no mounting system like factor, and the bars are not round. The bars are ripoffs of the roval rapides bars on sl8's
January 12, 2026, 01:39:11 PM 		1
Re: Seraph Bikes Superlight 836g X68 - Alternative to SL8 Fakes?
Quote from: Ride56 on January 13, 2026, 10:13:45 AM
I have a problem with the cockpit installation. I got the brake hoses through the cockpit, but when I want to install the cockpit on the fork it gets pushed to the right as if there is some cable tension. I don't know wehre it comes from, since I disassembled it and reassembled it without seeing an issue. How did you all install the cockpit?

When everything is assembled, try to unscrew the caliper (front or right or both) and turn it of 360°. I hope you will understand 😅.
January 13, 2026, 10:25:35 AM 		1
Re: Seraph Bikes Superlight 836g X68 - Alternative to SL8 Fakes?
Quote from: Ride56 on January 13, 2026, 11:36:54 AM
Oh so you mean the brake hose is twisted?

Almost, not really twist but the natural curve of the hose is not on the right side.
January 13, 2026, 02:06:46 PM 		1