Chinese Carbon MTB Forums
News:
Happy Holidays!
See likes
See likes given/taken
| Post info | No. of Likes |
|---|---|
Re: Spcycle New Mold SP-R088 Carbon Road Frame
I was finally able to stretch the legs of the R088 and did an early morning ride before the pollution levels of the Los Angeles fires became worst as the sun came out. I took it on both some long flat stretches and my local climb areas. It's relatively lightweight and I felt like there was good power transfer. On the flats, it accelerated smoothly while holding speed easily. On the climbs, I could go out of saddle and the frame responded well to rocking the bike back-n-forth. Handling is very good as well, I didn't even notice any toe overlap and steering felt precise without being overly twitchy. My only issue is that my other wheelset with 25c tires looks a bit awkward. For climbing I tend to prefer narrower tires. Aesthetically it looks best with a 28c tire or bigger. Overall it's a very well-balanced frameset. I think I could comfortably recommend it.  January 11, 2025, 02:30:31 PM |
1 |
|
Re: TanTan FM301
I'm such a greedy consumer. Whenever I see a shiny new bike build in this forum I always think "Hey I wanna build up and test that frame too!" Can't help myself. Well done sir. February 13, 2025, 04:47:14 PM |
1 |
|
Re: 12s road chainring
Echoing previous comments. Buy the shimano rings and be happy.
June 02, 2025, 07:54:38 PM |
1 |
|
Re: Assisting Force AF01
Lmao those Chinese guys really need to hire some western dude to come up with brand names for them 😂
June 20, 2025, 03:59:45 PM |
1 |
|
Re: Thinking of Going Deeper – A More Honest Look Inside the Replica Frame Industry
As I said before, I’m considering getting one of these frames and having it independently tested — WITH a CT scan or carbon layup analysis by a composite expert who operate close to me. Just to actually see what’s going on under the paint. People are clearly interested — even if the thread replies are low, there are lukers  as these are the ones asking where to buy these frame from and asking me about the quality!!. Feel free to DM if you’ve got questions, or want to share experiences anonymously.Thanks to the people who have said they are willing to contribute, there have been 1383 people view maybe people who have dipped in and out but enough people to maybe buy two frames as suggested the X68 and a decaled copy. Here’s the link for anyone interested: paypal.me/sanderson2177 Not sure how it’ll go, but I’ll keep everyone updated on the balance. If we don’t raise enough, it could take a while to refund everyone — just being honest 😄 Open to other suggestions too, so feel free to share your thoughts if you have a better idea! And here is some more information below! Replica Frames: Layups, Factory Realities, and the T1100-T1000 Myth — More from Inside the Industry After my last post I have still be gathering more information and apologies if I am repeating anything. I know this is a divisive topic, but interest is clearly there — I’ve had quite a few DMs from people who are lurking but curious. A lot of the info below may seem casual, but it’s the kind of stuff that rarely gets said out loud. Here’s a deeper look into what they’ve shared with me recently: 1. Drawings ≠ Layups Yes, they’re using CAD model drawings sourced from original factories — but those don’t include carbon fiber layup data. “In reality, it’s just a very precise 3D model — it doesn’t include the actual carbon fiber layering or fiber orientations.” That means two frames made from the same model drawing can perform very differently, depending entirely on how the layup is handled. 2. The Real Art: Fiber Orientation This is where real frame performance comes from. “By adjusting the fiber orientation (0°, ±45°, 90°), we can achieve anisotropic mechanical properties. In areas that require stiffness (like the bottom bracket and head tube), we increase longitudinal layup. In areas meant to absorb shock (like the seat stays), we use angled layups.” Each factory does this differently. There is no standard layup across replica frames, even if they come from similar drawings. And the material choice matters too. “We use M30 material from Korea, which is second only to Toray. Those so-called ‘T1100 & T1000’ claims are just trying to fool you.” So when you see a seller claiming “T1100 & T1000” — be wary. According to this seller, no one in the replica world is using it. 3.How Frames Are Really Made Most sellers aren’t frame builders. They’re intermediaries. “Yes, most people don’t actually own a factory — they just get hold of the design drawings and then look for an OEM factory to produce the frames. We’re the same.” There’s even a recent case where the factory got the drawings themselves and just started producing (an S5 replica), selling to distributors directly. But: “I don’t think a factory developing and producing on its own (just from drawings) will do a good job — because they don’t understand bicycles. They make all sorts of things — carbon fiber badminton rackets, carbon fiber car bumpers. 😂” Without a seller pushing the factory through repeated testing and iteration, the result might look like a bike frame but not perform like one. 4. The Factory Goods Era Is Over There was a time when (defective or leftover factory goods) were sneaking out of original production lines. “In the past, some people did take defective products from the original factory and sell them — we called those ‘factory goods.’ But now that kind of thing no longer exists, as control has become much stricter.” Raids and enforcement are real: “We only hear bits and pieces, like ‘so-and-so got caught by the police,’ or ‘their factory got raided and over 50 SL8 frames were confiscated.’” 5. Matching Originals — Not 1:1, But Close They do buy genuine frames — for comparison, for paint matching, and to check component tolerances. “We don’t dare guarantee a 1:1 replica; we can only say we try to get as close to the official version as possible.” When it comes to paint and finish: “We need genuine frames to match the colour tones and improve the level of accuracy.” So if you’ve ever wondered why some replica paint jobs look dead-on and others look like knockoffs, this is why — some are actually colour-matched using real frames. 6. Spotting Low-Quality Sellers This bit is gold: “Just ask them if it’s ‘T1000’ — if they say ‘yes’, then it’s definitely low-quality, no doubt about it 😉. They love to exaggerate.” “Or, if you see T1000 or T1100 in the product title on their shop, no need to think twice — block them and run away fast 🤣” Real materials? T800 & Korean M30. Consistent QC? Factory-dependent. Grand claims? Usually fake. 7. SL8: At Least Three Groups Making It As for the SL8, which a lot of people have asked me about — at least three separate groups are manufacturing it. According to the seller: “A few of them are actually using the same carbon fiber factory. So the quality of the products they sell should be about the same.” That said, branding and pricing varies — and some groups are even positioning themselves as “premium” sellers now What’s Next? June 23, 2025, 04:48:45 AM |
1 |
|
Re: Thinking of Going Deeper Counterfeit Frames – UPDATE and Fund Link
I have a replica Factor Ostro VAM v1 from one of the most reputable "fakers" it's their highest tier 3 layup. Only has about 120km on it. It did not workout for me (Frame is excellent quality to the point you wouldn't tell the difference it's just way too aggressive for me) and I ride an Enve Fray now. No one wants to purchase it and I would never try to sell it as a real one even though it really does look 1:1. I've done the endoscope camera etc down the frame but nothing extensive. I would be willing to donate it if it was guaranteed to be used/scanned for science and not just sit in your garage lol. June 23, 2025, 06:51:37 PM |
1 |
|
Re: New Tantan Seraph X71 - Replica Factor Ostro VAM V2 (UDH)
FWIW there is an elite-level racer here in Chicago that has been using a replica Ostro VAM for the past two seasons. He races against the top crit teams in the country. It's probably difficult to substantiate performance of the frame. I mean it doesn't seem to be holding him back. At the very least the frameset has been able to take abuse at the highest level. September 19, 2025, 10:29:36 AM |
1 |
Re: Seraph Bikes Superlight 836g X68 - Alternative to SL8 Fakes?
So I just got my frame delivered, took quite a while during the holidays in germany. Do you need some Screw measurements or did you receive yours now? Quite happy with mine, the paintjob looks really good, just the brake mounts are sprayed over quite a bit. The adapter for front brake is not good, one counterbore is way too deep so I can't use it. You guys reckon Tantan will send me a replacement or just don't bother and get it somewhere else? January 01, 2026, 11:12:24 AM |
1 |
Re: Interesting Aliexpress finds! - good deals, interesting stuff, new products etc!
WANTEDSchwalbe. February 26, 2026, 10:08:07 AM |
1 |
Re: SPCycle G028 new gravel frame with 57mm tires clearance
Do you offer the frameset without rivets on the fork/seat tube junction? already received the info: it is possible without rivets! I just ordered and paid, ETA around beginning to mid June. April 29, 2026, 03:40:40 AM |
1 |
