Chinese Carbon MTB Forums
News:
Happy Holidays!
See likes
See likes given/taken
| Post info | No. of Likes |
|---|---|
Re: Interesting Aliexpress finds! - good deals, interesting stuff, new products etc!
WANTEDSchwalbe. February 26, 2026, 10:08:07 AM |
1 |
Re: Lightcarbon: LCR018-D (endurance all-road)
Finished the assembly on my frame without any issue  First ride yesterday and got issues that were discussed on this forum. Integrated storage door that tend to open (as I was aware I did check regularly to not loose it during the ride). After the ride I noticed that the small screw of the closing mechanism needed to be retightened. If this occur again I will add some threadlocker on it. By safety I add a strap to maintain the door in case of problem : once the issue will be solved, I'll remove it. I also have the saddle tilt and don't find a way to use my torquewrench to ensure the 16Nm. I tried to tighten it as strong as I can and will see. First ride impression need to be confirmed with the right tire (I have ordered some 32 mm) : I installed temporarily some 28 mm tires but have some 32 mm in order (on my previous bike I have some 32 mm so of course the confort is not the same). Anyway I noticed that I was much more confident with this bike in the downhill. Still a big fan of the raw carbon glossy finish April 06, 2026, 03:33:02 AM |
1 |
Re: SPCycle G028 new gravel frame with 57mm tires clearance
I´m done with spcycle. I need to correct this. I sent spcycle another photo and asked them to take a closer look. This time they responded very quickly and generously offered to send me a new fork and even cover the return shipping costs for the old one. That's excellent customer service. I didn´t expect tthe offer to cover the return shipping costs. So: After all my complaining, here is some appreciation for spcycle regarding how they intend to handle the situation. (I replied to the last mail and told them about my reinforcement. Perhaps my reinforcement will cause them to withdraw their offer. I would understand that, and I was fully aware of the risk of voiding the warranty when I reinforced the fork myself.) July 01, 2026, 03:52:37 AM |
1 |
|
Re: SPCycle G028 new gravel frame with 57mm tires clearance
First review on AliExpress spotted: High-quality frame. Beautiful color; it shifts between blue and purple hues depending on the lighting. Neat paintwork—all mounting surfaces are left unpainted. Tire clearance with Schwalbe Thunder Burt 29x2.25 tires (actual width 55mm on my rims) is about 7mm on each side at the rear; I didn't measure the front, but the clearance is greater there. Easy assembly—no facing or filing was required, and the threaded inserts and bottom bracket shell are perfectly aligned. It’s a shame the downtube storage bag isn't included, but that’s a minor issue—it can be purchased separately. I’ll update this review after testing. https://ali.click/yl3kg1f July 06, 2026, 03:29:58 PM |
1 |
|
Re: SPCycle G028 new gravel frame with 57mm tires clearance
Frame ordered on May 22th arrived June 7th Paintwork average just had time to check critical points. Everything looks fine so far apart from the rear brake mounts. Those need attention. July 07, 2026, 06:15:07 AM |
1 |
|
Re: Lightcarbon: LCR018-D (endurance all-road)
Hey everyone, I wrote a while back about having some issues with my frame, a crack on the top tube (likely from shipping) that I unfortunately only noticed during my first ride after finishing the build. I'm happy to give a quick update: I contacted Light Carbon, and on June 11th, they confirmed they will provide a free replacement frame (excluding handlebar, fork, and seat post), complete with the custom paint job. They are also covering all shipping costs. Massive props to their customer service for handling it so well. A bit off topic, but while waiting for the new frame to arrive, I’m looking for a new wheelset to pair with it. I want to keep the build looking clean, so I'll be opting for a matte UD finish with no decals. I’ve been eyeing a 45mm front / 60mm rear staggered setup from Serenade: serenadebikes.net/23mm-internal-high-performance-aero-bike-wheels-build-with-carbon-fiber-spokes-p6704522.html. To give you some context on how I will use them, I will mostly be running 30mm road tires for summer, but the wheels should also allow for 35-38mm gravel tires. I am looking for a setup that is reasonably light and snappy without sacrificing flat-road aero, especially since I mostly ride flat roads and only ride hills on vacations. Do you think this configuration makes sense for an aero frame, or should I consider other alternatives in the sub 700€ price bracket? What wheels are you guys running on your builds, and are you happy with them? Serenade seems to have a good price performance ratio, but I am open to other suggestions. July 18, 2026, 04:46:34 PM |
1 |
|
Re: SPCycle G028 new gravel frame with 57mm tires clearance
Almost finished the build. Cockpit: Rpantahi 360mm Wheelset: Elitewheels Gravel Aero+ (32mm IW) Tires: Continental Dubnital 55mm (55mm WAM) Tightest part is the chain stay, as expected. 8mm clearance, which means 57mm tires (WAM) fit with exactly 6mm clearance. July 24, 2026, 10:31:44 AM |
1 |
Re: SPCycle G028 new gravel frame with 57mm tires clearance
How tall are you? I am 186cm with 89,7cm inseam and am thinking between M and L. I am 183 and ride an M. I think with 186 I’d go for an L July 26, 2026, 01:22:45 PM |
1 |
Re: Lightcarbon: LCR018-D (endurance all-road)
Hi LCR-Community! I have ready the hole thread about this frame. Many thanks for all these information I can find here. Maybe someone can help me. I'm struggling with myself about the frame color. so many choices are not always good.I have the raw carbon with glossy finish, and on my frame it is mostly black with some areas where you can see the carbon weave. I think that it is the best looking frame that I currently own. September 05, 2026, 04:46:53 PM |
1 |
So I have a question about the raw carbon look with glossy finish. Is it possible to see the carbon pattern on all parts or look it mostly black? On the most photos the painting reflects the light to much, so I can not see.