See likes

See likes given/taken


Posts you liked

Pages: [1]
Post info No. of Likes
Re: Wheeltop EDS GeX Hi everyone!

I’m having an issue with my Wheeltop EDS GeX Gravel 1x12 and wanted to ask if anyone has experienced something similar or knows of a possible solution.

Unfortunately, Wheeltop hasn’t been very helpful so far. I reported the problem with videos and a detailed description, but apart from telling me that the one-year warranty had expired, there was no technical analysis, troubleshooting, or offer of a replacement shifter. In the end, I was basically told to buy a new groupset.

The problem is with the right shifter:

Both buttons are no longer detected separately.
I can change the button assignment in the app, but both buttons always perform the function assigned to the small button.
Example: large = “+”, small = “−” → both shift “+”.
If I swap the assignment: large = “−”, small = “+” → both shift “−”.
The shifter itself is detected normally in the app.
The current gear position is also displayed correctly.
Shifting via the app works normally in both directions.

I have already tried:

Replacing both shifter batteries (3.3 V)
Updating the firmware
Re-pairing the shifters
Resetting the system
Resetting and testing the button assignments several times

Does anyone have any idea what could be causing this? Maybe someone has experienced a similar problem or knows whether the shifter can be reset/relearned separately, or whether this sounds more like a hardware failure?

Thanks!
August 17, 2026, 02:08:05 AM 		1
Re: Wheeltop EDS GeX Just come across a problem with my lever.
Brakes had gone very soft and went to do a bleed and fresh fluid.
Kept getting loads of air coming through at the brake rotor end. Then I noticed dripping from below the lever. Up on the plug was dry but underneath the lever was dripping fluid. Possibly a seal gone? Fixable or just order new shifters?
Thanks
August 21, 2026, 11:33:17 AM 		1