See likes

See likes given/taken


Posts you liked

Pages: [1]
Post info No. of Likes
Re: Lightcarbon: LCR018-D (endurance all-road)
Quote from: farni on May 02, 2026, 07:44:42 AM
I shoud have mentioned this: I did - extensively.

For exapmple my current bike:
https://bikeinsights.com/compare?geometries=5d73cc4852f5c300177f105a,69cf428f8679c1001a45a7dc&builds=69f3b5bbc34bfe001b0889a2

Can/should I trust this agreement 100%? I am simply scared of the "194 - 199cm" LC assigns to their 58er frame  :-\

Keep in the mind the Lightcarbon handlebars have 8mm of rise. So same spacers/front stem, the lightcarbon actually has a higher handlebar contact point that is not reflected in the frame stack.

The 8mm difference in reach can be accounted for with a shorter front stem on the lightcarbon as well.
May 02, 2026, 12:51:32 PM 		1
Re: Lightcarbon: LCR018-D (endurance all-road)
Quote from: xenograft on May 02, 2026, 12:51:32 PM
Keep in the mind the Lightcarbon handlebars have 8mm of rise. So same spacers/front stem, the lightcarbon actually has a higher handlebar contact point that is not reflected in the frame stack.

The 8mm difference in reach can be accounted for with a shorter front stem on the lightcarbon as well.

The bars have 8mm of stack and the bearing cap has 10mm, so that makes the reach of both frame within 1 or 2mm of each other. (Can’t be bothered to do the actual calculation)
If he keeps 20mm of additional spacers, the stem should remain 110mm
May 02, 2026, 01:00:50 PM 		1
Re: Lightcarbon: LCR018-D (endurance all-road)
Quote from: POTOOOOOOOO on May 02, 2026, 01:00:50 PM
The bars have 8mm of stack and the bearing cap has 10mm, so that makes the reach of both frame within 1 or 2mm of each other. (Can’t be bothered to do the actual calculation)
If he keeps 20mm of additional spacers, the stem should remain 110mm

based on his post, i have to assume his current setup has -7 handlebars like LC since he didnt specify. otherwise the comparison is different. 100mm front stem would be closer to account for the reach difference in the bike geo (8mm longer reach on the LC)
May 02, 2026, 01:39:54 PM 		1
Re: Lightcarbon: LCR018-D (endurance all-road)
Quote from: Fronk on May 02, 2026, 02:12:07 PM
Wow, what a detailed comparison! Where can I find this tool?

Regards

I made it for my personal use, but glad you found the comparison helpful! Happy to share here: https://bikefitr-3af15.web.app
May 02, 2026, 03:04:27 PM 		1
Re: Lightcarbon: LCR018-D (endurance all-road)
Quote from: jstrawks on May 02, 2026, 05:53:18 PM
My Cycplus is about 50mm deep.

The AS2 ultra Cycplus pump can be stored into the storage compartment.
May 03, 2026, 04:20:08 AM 		1
Re: Lightcarbon: LCR018-D (endurance all-road) FYI - i contacted Tailfin to figure out if their rack fits on the LCR018-D.

Here is their response:

"From the details you provided, your bike will require the following parts:

Axle: Universal Thru Axle (using the 1.0mm part - included)

Adaptor: UDH Adaptor and Tailfin UDH Hanger (both included with the Tailfin UDH Adaptor Set)

Please replace the original hanger with the tailfin UDH hanger so the UDH Adaptor bolt will fit!"
September 07, 2026, 04:48:09 AM 		1