See likes

See likes given/taken


Posts you liked

Pages: [1]
Post info No. of Likes
Re: List of Full Suspension MTB Frames Nicely Done DIRT ,  don't listen to the rest of these guys most of whom were waiting on someone to do this for them....
March 17, 2020, 06:10:25 PM 		1
Re: Best sub $400 carbon 29er wheels
https://a.aliexpress.com/_mNRgoKd

Here’s the best I’ve found 25mm internal width and ratchet drive dt Swiss 240 clone hubs
December 09, 2020, 04:54:25 PM 		1
Re: Chinese Carbon 29er Pic Thread. airwolf/ santa cruz highball

XO1 11 speed
margura MT8
FSA Kforce bars, SLK stem
WTB Sl8 Carbon
Thomson post for now until carbon one arrives
nexties on 240 28h
E Thirteen trs r cranks
19 lbs 13oz
December 18, 2020, 01:47:36 PM 		1
Re: Stumpjumper clone A month ago, I decided to pulled out the trigger and bought one of this at Aliexpress, today the frame arrived and first impressions are quite good:

- Frame came very well packaged and indluded a headset (tapered, integrated type), seatpost clamp (38.6mm clamp for 34.9 seatpost) and even the chain guide; sadly it didnt include the axle
- Hardware looks just like the original stumpy (each bolt, linkages, derailleur hanger, etc) it came a little loose and bearings are not the greatest
- Cable routing follows the original stumpy but have no internal tubing (need to fish out the cables)
- Dimensions/geo numbers are much alike the 2019 stumpy (non EVO version)
- Came with the 95mm/98mm yoke (for up to 150mm travel), max shock size seems to support a 210mm shock
- Water bottle mount is just a little higher than the original stumpy
- Shock hardware seems to use 21.8mm x 8mm for the top (actual bolt is 6mm but they include a spacer for 8mm), still figuring out the bottom as it seems to require either the actual flip chip (there are grooves in the yoke which seems to match) or some sort of customization of the hardware (actual spacing ~14.5mm)
December 22, 2020, 06:29:29 PM 		1
Carbonda FM909 New light weight XC fully frame 100/100 travel coming up.
Available from June 2021 the earliest.
http://www.carbonda.com/mountain/full-suspension/130.html
January 04, 2021, 02:48:53 AM 		1
Re: FM1156 - 135mm frame
Quote from: chetosmachine on January 05, 2021, 05:27:19 AM
Did you, by any chance, get a quote for the frame? It's a tempting frame none the less.

Price for the Fm1156 720$ without anything.
January 05, 2021, 06:15:42 AM 		1
Re: Ican S3 XC Frame I like the linkage style - if it was 120mm I'd jump on it.
April 02, 2021, 12:58:57 PM 		1
Re: Full suspension build https://www.mtbdirect.com.au/how-to-measure-the-shock-and-hardware-size-on-a-mountain-bike

There's a writeup and picture in this article about trunnion mounts.  Standard shocks use an eyelet at either end of the shock.  These eyelets require purchasing hardware to fit the frame on both sides.  A trunnion mount is basically two threaded holes on either side of the shock body.  There will be bearings in the frame or linkage, and frames will come with the bolts that go through them, so you will only need to purchase hardware for the one eyelet mount on the other side of the trunnion mount.  I believe the FM936, ICAN S3, and LCFS911 all use trunnion shocks.
May 27, 2021, 10:20:55 AM 		1
Re: Does anyone know the headset specs for a Tantan FM199? How difficult can it be.

https://www.google.com/search?q=fm-199+frame+headset

First result => headset: top 1-1/8"， down 1-1/2"

Search on AliExpress and .... YEAH!

You're welcome.
June 01, 2021, 11:26:05 AM 		1